| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1352872056-5637-1-git-send-email-xtfeng@gmail.com> Date: Wed, 14 Nov 2012 13:47:36 +0800 From: Xiaotian Feng <xtfeng@...il.com> To: davem@...emloft.net Cc: Xiaotian Feng <xtfeng@...il.com>, Xiaotian Feng <dannyfeng@...cent.com>, netdev@...r.kernel.org, linux-kernel@...r.kernel.org Subject: [PATCH] drivers/net: fix tasklet misuse issue In commit 175c0dff, drivers uses tasklet_kill to avoid put disabled tasklet on the tasklet vec. But some of the drivers uses tasklet_init & tasklet_disable in the driver init code, then tasklet_enable when it is opened. This makes tasklet_enable on a killed tasklet and make ksoftirqd crazy then. Normally, drivers should use tasklet_init/tasklet_kill on device open/remove, and use tasklet_disable/tasklet_enable on device suspend/resume. Reported-by: Peter Wu <lekensteyn@...il.com> Tested-by: Peter Wu <lekensteyn@...il.com> Signed-off-by: Xiaotian Feng <dannyfeng@...cent.com> Cc: "David S. Miller" <davem@...emloft.net> Cc: netdev@...r.kernel.org Cc: linux-kernel@...r.kernel.org --- drivers/net/ethernet/jme.c | 28 ++++++--------------- drivers/net/ethernet/micrel/ksz884x.c | 16 +++--------- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 12 ++++----- 3 files changed, 18 insertions(+), 38 deletions(-) diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c index 92317e9..c0314c1 100644 --- a/drivers/net/ethernet/jme.c +++ b/drivers/net/ethernet/jme.c @@ -1860,10 +1860,14 @@ jme_open(struct net_device *netdev) jme_clear_pm(jme); JME_NAPI_ENABLE(jme); - tasklet_enable(&jme->linkch_task); - tasklet_enable(&jme->txclean_task); - tasklet_hi_enable(&jme->rxclean_task); - tasklet_hi_enable(&jme->rxempty_task); + tasklet_init(&jme->linkch_task, jme_link_change_tasklet, + (unsigned long) jme); + tasklet_init(&jme->txclean_task, jme_tx_clean_tasklet, + (unsigned long) jme); + tasklet_init(&jme->rxclean_task, jme_rx_clean_tasklet, + (unsigned long) jme); + tasklet_init(&jme->rxempty_task, jme_rx_empty_tasklet, + (unsigned long) jme); rc = jme_request_irq(jme); if (rc) @@ -3079,22 +3083,6 @@ jme_init_one(struct pci_dev *pdev, tasklet_init(&jme->pcc_task, jme_pcc_tasklet, (unsigned long) jme); - tasklet_init(&jme->linkch_task, - jme_link_change_tasklet, - (unsigned long) jme); - tasklet_init(&jme->txclean_task, - jme_tx_clean_tasklet, - (unsigned long) jme); - tasklet_init(&jme->rxclean_task, - jme_rx_clean_tasklet, - (unsigned long) jme); - tasklet_init(&jme->rxempty_task, - jme_rx_empty_tasklet, - (unsigned long) jme); - tasklet_disable_nosync(&jme->linkch_task); - tasklet_disable_nosync(&jme->txclean_task); - tasklet_disable_nosync(&jme->rxclean_task); - tasklet_disable_nosync(&jme->rxempty_task); jme->dpi.cur = PCC_P1; jme->reg_ghc = 0; diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c index e558edd..b66b285 100644 --- a/drivers/net/ethernet/micrel/ksz884x.c +++ b/drivers/net/ethernet/micrel/ksz884x.c @@ -5459,8 +5459,10 @@ static int prepare_hardware(struct net_device *dev) rc = request_irq(dev->irq, netdev_intr, IRQF_SHARED, dev->name, dev); if (rc) return rc; - tasklet_enable(&hw_priv->rx_tasklet); - tasklet_enable(&hw_priv->tx_tasklet); + tasklet_init(&hw_priv->rx_tasklet, rx_proc_task, + (unsigned long) hw_priv); + tasklet_init(&hw_priv->tx_tasklet, tx_proc_task, + (unsigned long) hw_priv); hw->promiscuous = 0; hw->all_multi = 0; @@ -7033,16 +7035,6 @@ static int __devinit pcidev_init(struct pci_dev *pdev, spin_lock_init(&hw_priv->hwlock); mutex_init(&hw_priv->lock); - /* tasklet is enabled. */ - tasklet_init(&hw_priv->rx_tasklet, rx_proc_task, - (unsigned long) hw_priv); - tasklet_init(&hw_priv->tx_tasklet, tx_proc_task, - (unsigned long) hw_priv); - - /* tasklet_enable will decrement the atomic counter. */ - tasklet_disable(&hw_priv->rx_tasklet); - tasklet_disable(&hw_priv->tx_tasklet); - for (i = 0; i < TOTAL_PORT_NUM; i++) init_waitqueue_head(&hw_priv->counter[i].counter); diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 1d04754..7740f4b 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -942,6 +942,10 @@ static int axienet_open(struct net_device *ndev) phy_start(lp->phy_dev); } + /* Enable tasklets for Axi DMA error handling */ + tasklet_init(&lp->dma_err_tasklet, axienet_dma_err_handler, + (unsigned long) lp); + /* Enable interrupts for Axi DMA Tx */ ret = request_irq(lp->tx_irq, axienet_tx_irq, 0, ndev->name, ndev); if (ret) @@ -950,8 +954,7 @@ static int axienet_open(struct net_device *ndev) ret = request_irq(lp->rx_irq, axienet_rx_irq, 0, ndev->name, ndev); if (ret) goto err_rx_irq; - /* Enable tasklets for Axi DMA error handling */ - tasklet_enable(&lp->dma_err_tasklet); + return 0; err_rx_irq: @@ -960,6 +963,7 @@ err_tx_irq: if (lp->phy_dev) phy_disconnect(lp->phy_dev); lp->phy_dev = NULL; + tasklet_kill(&lp->dma_err_tasklet); dev_err(lp->dev, "request_irq() failed\n"); return ret; } @@ -1613,10 +1617,6 @@ static int __devinit axienet_of_probe(struct platform_device *op) goto err_iounmap_2; } - tasklet_init(&lp->dma_err_tasklet, axienet_dma_err_handler, - (unsigned long) lp); - tasklet_disable(&lp->dma_err_tasklet); - return 0; err_iounmap_2: -- 1.7.9.6 (Apple Git-31.1) -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists