| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1358391358-27977-1-git-send-email-Frank.Li@freescale.com>
Date: Thu, 17 Jan 2013 10:55:58 +0800
From: Frank Li <Frank.Li@...escale.com>
To: <lznuaa@...il.com>, <shawn.guo@...aro.org>, <B38611@...escale.com>,
<davem@...emloft.net>, <linux-arm-kernel@...ts.infradead.org>,
<netdev@...r.kernel.org>, <bhutchings@...arflare.com>
CC: <s.hauer@...gutronix.de>, Frank Li <Frank.Li@...escale.com>
Subject: [PATCH v3 1/1 net-next] net: fec: enable pause frame to improve rx prefomance for 1G network
The limition of imx6 internal bus cause fec can't achieve 1G perfomance.
There will be many packages lost because FIFO over run.
This patch enable pause frame flow control.
Before this patch
iperf -s -i 1
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
[ 4] local 10.192.242.153 port 5001 connected with 10.192.242.94 port 49773
[ ID] Interval Transfer Bandwidth
[ 4] 0.0- 1.0 sec 6.35 MBytes 53.3 Mbits/sec
[ 4] 1.0- 2.0 sec 3.39 MBytes 28.5 Mbits/sec
[ 4] 2.0- 3.0 sec 2.63 MBytes 22.1 Mbits/sec
[ 4] 3.0- 4.0 sec 1.10 MBytes 9.23 Mbits/sec
ifconfig
RX packets:46195 errors:1859 dropped:1 overruns:1859 frame:1859
After this patch
iperf -s -i 1
[ 4] local 10.192.242.153 port 5001 connected with 10.192.242.94 port 49757
[ ID] Interval Transfer Bandwidth
[ 4] 0.0- 1.0 sec 49.8 MBytes 418 Mbits/sec
[ 4] 1.0- 2.0 sec 50.1 MBytes 420 Mbits/sec
[ 4] 2.0- 3.0 sec 47.5 MBytes 399 Mbits/sec
[ 4] 3.0- 4.0 sec 45.9 MBytes 385 Mbits/sec
[ 4] 4.0- 5.0 sec 44.8 MBytes 376 Mbits/sec
ifconfig
RX packets:2348454 errors:0 dropped:16 overruns:0 frame:0
Signed-off-by: Frank Li <Frank.Li@...escale.com>
Signed-off-by: Fugang Duan <B38611@...escale.com>
---
Change from v2 to v3
* Fix code style problem reviewed by David
Change from V1 to V2
* using pause_setparam to enable/disable pause frame
* default enable pause frame auto negotiation
drivers/net/ethernet/freescale/fec.c | 87 +++++++++++++++++++++++++++++++++-
drivers/net/ethernet/freescale/fec.h | 5 ++
2 files changed, 91 insertions(+), 1 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
index 6dc2094..8336157 100644
--- a/drivers/net/ethernet/freescale/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c
@@ -68,6 +68,14 @@
#define DRIVER_NAME "fec"
+/* Pause frame feild and FIFO threshold */
+#define FEC_ENET_FCE (1 << 5)
+#define FEC_ENET_RSEM_V 0x84
+#define FEC_ENET_RSFL_V 16
+#define FEC_ENET_RAEM_V 0x8
+#define FEC_ENET_RAFL_V 0x8
+#define FEC_ENET_OPD_V 0xFFF0
+
/* Controller is ENET-MAC */
#define FEC_QUIRK_ENET_MAC (1 << 0)
/* Controller needs driver to swap frame */
@@ -193,6 +201,9 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address");
/* Transmitter timeout */
#define TX_TIMEOUT (2 * HZ)
+#define FEC_PAUSE_FLAG_AUTONEG 0x1
+#define FEC_PAUSE_FLAG_ENABLE 0x2
+
static int mii_cnt;
static struct bufdesc *fec_enet_get_nextdesc(struct bufdesc *bdp, int is_ex)
@@ -470,6 +481,25 @@ fec_restart(struct net_device *ndev, int duplex)
}
#endif
}
+
+ /* enable pause frame*/
+ if ((fep->pause_flag & FEC_PAUSE_FLAG_ENABLE) ||
+ ((fep->pause_flag & FEC_PAUSE_FLAG_AUTONEG) &&
+ fep->phy_dev && fep->phy_dev->pause)) {
+ rcntl |= FEC_ENET_FCE;
+
+ /* set FIFO thresh hold parameter to reduce overrun */
+ writel(FEC_ENET_RSEM_V, fep->hwp + FEC_R_FIFO_RSEM);
+ writel(FEC_ENET_RSFL_V, fep->hwp + FEC_R_FIFO_RSFL);
+ writel(FEC_ENET_RAEM_V, fep->hwp + FEC_R_FIFO_RAEM);
+ writel(FEC_ENET_RAFL_V, fep->hwp + FEC_R_FIFO_RAFL);
+
+ /* OPD */
+ writel(FEC_ENET_OPD_V, fep->hwp + FEC_OPD);
+ } else {
+ rcntl &= ~FEC_ENET_FCE;
+ }
+
writel(rcntl, fep->hwp + FEC_R_CNTRL);
if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) {
@@ -1016,8 +1046,10 @@ static int fec_enet_mii_probe(struct net_device *ndev)
}
/* mask with MAC supported features */
- if (id_entry->driver_data & FEC_QUIRK_HAS_GBIT)
+ if (id_entry->driver_data & FEC_QUIRK_HAS_GBIT) {
phy_dev->supported &= PHY_GBIT_FEATURES;
+ phy_dev->supported |= SUPPORTED_Pause;
+ }
else
phy_dev->supported &= PHY_BASIC_FEATURES;
@@ -1203,7 +1235,55 @@ static int fec_enet_get_ts_info(struct net_device *ndev,
}
}
+static void fec_enet_get_pauseparam(struct net_device *ndev,
+ struct ethtool_pauseparam *pause)
+{
+ struct fec_enet_private *fep = netdev_priv(ndev);
+
+ pause->autoneg = (fep->pause_flag & FEC_PAUSE_FLAG_AUTONEG) != 0;
+ pause->tx_pause = (fep->pause_flag & FEC_PAUSE_FLAG_ENABLE) != 0;
+ pause->rx_pause = pause->tx_pause;
+}
+
+static int fec_enet_set_pauseparam(struct net_device *ndev,
+ struct ethtool_pauseparam *pause)
+{
+ struct fec_enet_private *fep = netdev_priv(ndev);
+
+ if (pause->tx_pause != pause->rx_pause) {
+ netdev_info(ndev,
+ "hardware only support enable/disable both tx and rx");
+ return -EINVAL;
+ }
+
+ fep->pause_flag = 0;
+
+ /* tx pause must be same as rx pause */
+ fep->pause_flag |= pause->rx_pause ? FEC_PAUSE_FLAG_ENABLE : 0;
+ fep->pause_flag |= pause->autoneg ? FEC_PAUSE_FLAG_AUTONEG : 0;
+
+ if (pause->rx_pause || pause->autoneg) {
+ fep->phy_dev->supported |= ADVERTISED_Pause;
+ fep->phy_dev->advertising |= ADVERTISED_Pause;
+ } else {
+ fep->phy_dev->supported &= ~ADVERTISED_Pause;
+ fep->phy_dev->advertising &= ~ADVERTISED_Pause;
+ }
+
+ if (pause->autoneg) {
+ if (netif_running(ndev))
+ fec_stop(ndev);
+ phy_start_aneg(fep->phy_dev);
+ }
+ if (netif_running(ndev))
+ fec_restart(ndev, 0);
+
+ return 0;
+}
+
static const struct ethtool_ops fec_enet_ethtool_ops = {
+ .get_pauseparam = fec_enet_get_pauseparam,
+ .set_pauseparam = fec_enet_set_pauseparam,
.get_settings = fec_enet_get_settings,
.set_settings = fec_enet_set_settings,
.get_drvinfo = fec_enet_get_drvinfo,
@@ -1643,6 +1723,11 @@ fec_probe(struct platform_device *pdev)
/* setup board info structure */
fep = netdev_priv(ndev);
+ /* default enable pause frame auto negotiation */
+ if (pdev->id_entry &&
+ (pdev->id_entry->driver_data & FEC_QUIRK_HAS_GBIT))
+ fep->pause_flag |= FEC_PAUSE_FLAG_AUTONEG;
+
fep->hwp = ioremap(r->start, resource_size(r));
fep->pdev = pdev;
fep->dev_id = dev_id++;
diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h
index 4862394..2ebedaf 100644
--- a/drivers/net/ethernet/freescale/fec.h
+++ b/drivers/net/ethernet/freescale/fec.h
@@ -48,6 +48,10 @@
#define FEC_R_DES_START 0x180 /* Receive descriptor ring */
#define FEC_X_DES_START 0x184 /* Transmit descriptor ring */
#define FEC_R_BUFF_SIZE 0x188 /* Maximum receive buff size */
+#define FEC_R_FIFO_RSFL 0x190 /* Receive FIFO section full threshold */
+#define FEC_R_FIFO_RSEM 0x194 /* Receive FIFO section empty threshold */
+#define FEC_R_FIFO_RAEM 0x198 /* Receive FIFO almost empty threshold */
+#define FEC_R_FIFO_RAFL 0x19c /* Receive FIFO almost full threshold */
#define FEC_MIIGSK_CFGR 0x300 /* MIIGSK Configuration reg */
#define FEC_MIIGSK_ENR 0x308 /* MIIGSK Enable reg */
@@ -243,6 +247,7 @@ struct fec_enet_private {
struct completion mdio_done;
int irq[FEC_IRQ_NUM];
int bufdesc_ex;
+ int pause_flag;
struct ptp_clock *ptp_clock;
struct ptp_clock_info ptp_caps;
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists