| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20130212090850.GB22029@redhat.com>
Date: Tue, 12 Feb 2013 11:08:50 +0200
From: "Michael S. Tsirkin" <mst@...hat.com>
To: Peter Lieven <pl@...net.de>
Cc: Stefan Hajnoczi <stefanha@...il.com>, qemu-devel@...gnu.org,
netdev@...r.kernel.org
Subject: Re: [Qemu-devel] tap devices not receiving packets from a bridge
On Tue, Feb 12, 2013 at 08:06:04AM +0100, Peter Lieven wrote:
> On 23.01.2013 11:03, Michael S. Tsirkin wrote:
> >On Tue, Jan 22, 2013 at 10:04:07AM +0100, Peter Lieven wrote:
> >>On 23.11.2012 12:01, Michael S. Tsirkin wrote:
> >>>On Fri, Nov 23, 2012 at 10:41:21AM +0100, Peter Lieven wrote:
> >>>>
> >>>>Am 23.11.2012 um 08:02 schrieb Stefan Hajnoczi:
> >>>>
> >>>>>On Thu, Nov 22, 2012 at 03:29:52PM +0100, Peter Lieven wrote:
> >>>>>>is anyone aware of a problem with the linux network bridge that in very rare circumstances stops
> >>>>>>a bridge from sending pakets to a tap device?
> >>>>>>
> >>>>>>My problem occurs in conjunction with vanilla qemu-kvm-1.2.0 and Ubuntu Kernel 3.2.0-34.53
> >>>>>>which is based on Linux 3.2.33.
> >>>>>>
> >>>>>>I was not yet able to reproduce the issue, it happens in really rare cases. The symptom is that
> >>>>>>the tap does not have any TX packets. RX is working fine. I see the packets coming in at
> >>>>>>the physical interface on the host, but they are not forwarded to the tap interface.
> >>>>>>The bridge itself has learnt the mac address of the vServer that is connected to the tap interface.
> >>>>>>It does not help to toggle the bridge link status, the tap interface status or the interface in the vServer.
> >>>>>>It seems that problem occurs if a tap interface that has previously been used, but set to nonpersistent
> >>>>>>is set persistent again and then is by chance assigned to the same vServer (=same mac address on same
> >>>>>>bridge) again. Unfortunately it seems not to be reproducible.
> >>>>>
> >>>>>Not sure but this patch from Michael Tsirkin may help - it solves an
> >>>>>issue with persistent tap devices:
> >>>>>
> >>>>>http://patchwork.ozlabs.org/patch/198598/
> >>>>
> >>>>Hi Stefan,
> >>>>
> >>>>thanks for the pointer. I have seen this patch, but I have neglected it because it was dealing
> >>>>with persistent taps. But maybe the taps in the kernel are not deleted directly.
> >>>>Can you remember what the syptomps of the above issue have been? Sorry for
> >>>>being vague, but I currently have no clue whats going on.
> >>>>
> >>>>Can someone who has more internal knowledge of the bridging/tap code say if qemu can
> >>>>be responsible at all if the tap device is not receiving packets from the bridge.
> >>>>
> >>>>If I have the following config. Lets say packets coming in via physical interface eth1.123,
> >>>>and a bridge called br123.I further have a virtual machine with tap0. Both eth1.123
> >>>>and tap0 are member of br123.
> >>>>
> >>>>If the issue occurs the vServer has no network connectivity inbound. If I sent a ping
> >>>>from the vServer I see it on tap0 and leaving on eth1.123. I see further the arp reply coming
> >>>>in via eth1.123, but the reply can't be seen on tap0.
> >>>>
> >>>>Peter
> >>>
> >>>If guest is not consuming packets, a TX queue in tap device
> >>>will with time overrun (there's space for 1000 packets there).
> >>>This is code from tun:
> >>>
> >>> if (skb_queue_len(&tfile->socket.sk->sk_receive_queue)
> >>> >= dev->tx_queue_len / tun->numqueues){
> >>> if (!(tun->flags & TUN_ONE_QUEUE)) {
> >>> /* Normal queueing mode. */
> >>> /* Packet scheduler handles dropping of further
> >>> * packets. */
> >>> netif_stop_subqueue(dev, txq);
> >>>
> >>> /* We won't see all dropped packets
> >>> * individually, so overrun
> >>> * error is more appropriate. */
> >>> dev->stats.tx_fifo_errors++;
> >>>
> >>>
> >>>So you can detect that this triggered by looking at fifo errors counter in device.
> >>>
> >>>Once this happens TX queue is stopped, then you hit this path:
> >>>
> >>> if (!netif_xmit_stopped(txq)) {
> >>> __this_cpu_inc(xmit_recursion);
> >>> rc = dev_hard_start_xmit(skb, dev, txq);
> >>> __this_cpu_dec(xmit_recursion);
> >>> if (dev_xmit_complete(rc)) {
> >>> HARD_TX_UNLOCK(dev, txq);
> >>> goto out;
> >>> }
> >>> }
> >>>
> >>>so packets are not passed to device anymore.
> >>>It will stay this way until guest consumes some packets and
> >>>queue is restarted.
> >>
> >>After some time I again have a vServer in this state. It seems not like there
> >>are no TX errors.
> >>
> >># ifconfig tap10
> >>tap10 Link encap:Ethernet HWaddr 7a:59:20:6f:e7:e5
> >> inet6 addr: fe80::7859:20ff:fe6f:e7e5/64 Scope:Link
> >> UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
> >> RX packets:197431 errors:0 dropped:0 overruns:0 frame:0
> >> TX packets:264309 errors:0 dropped:0 overruns:2 carrier:0
> >> collisions:0 txqueuelen:500
> >> RX bytes:13842063 (13.8 MB) TX bytes:35092821 (35.0 MB)
> >>
> >>It seems like the bridge is not forwarding any packets to the tap device anymore altough it has learnt
> >>the MAC-Adresses and there are also broadcast packets coming in.
> >>
> >>Any more ideas where I could debug?
> >>
> >>Peter
> >>
> >>>
> >>>>>
> >>>>>Stefan
> >
> >Hmm. So there are two overrun errors that triggered, so
> >it's possible after the second one the queue got stuck in an xoff state.
> >You'd have to use something like systemtap or kdb to poke at the
> >queue state to see whether xoff flag is set and/or look
> >at the receive queue length.
> >
> >For future, we can try to set TUN_ONE_QUEUE flag on the interface,
> >or try applying this patch
> >5d097109257c03a71845729f8db6b5770c4bbedc
> >in kernel see if this helps.
> >
>
> If have set this option for 2 weeks now and not seen this problem again.
> How does this flag work with the recently added tap multiqueue support?
>
> Peter
This will be the only option in 3.8.
--
MST
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists