| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1360660088-27464-1-git-send-email-sr@denx.de>
Date: Tue, 12 Feb 2013 10:08:08 +0100
From: Stefan Roese <sr@...x.de>
To: netdev@...r.kernel.org
Cc: linuxppc-dev@...abs.org, Anatolij Gustschin <agust@...x.de>
Subject: [PATCH v2] net: fec_mpc52xx: Read MAC address from device-tree
Until now, the MPC5200 FEC ethernet driver relied upon the bootloader
(U-Boot) to write the MAC address into the ethernet controller
registers. The Linux driver should not rely on such a thing. So
lets read the MAC address from the DT as it should be done here.
The following priority is now used to read the MAC address:
1) First, try OF node MAC address, if not present or invalid, then:
2) Read from MAC address registers, if invalid, then:
3) Log a warning message, and choose a random MAC address.
This fixes a problem with a MPC5200 board that uses the SPL U-Boot
version without FEC initialization before Linux booting for
boot speedup.
Additionally a status line is now be printed upon successful
driver probing, also displaying this MAC address.
Signed-off-by: Stefan Roese <sr@...x.de>
Cc: Anatolij Gustschin <agust@...x.de>
---
v2:
- Remove module parameter mpc52xx_fec_mac_addr
- Priority for MAC address probing now is DT, controller regs
If the resulting MAC address is invalid, a random address will
be generated and used with a warning message
- Use "np" variable to simplify the code
drivers/net/ethernet/freescale/fec_mpc52xx.c | 61 +++++++++++++++++-----------
1 file changed, 37 insertions(+), 24 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec_mpc52xx.c b/drivers/net/ethernet/freescale/fec_mpc52xx.c
index 817d081..8b725f4 100644
--- a/drivers/net/ethernet/freescale/fec_mpc52xx.c
+++ b/drivers/net/ethernet/freescale/fec_mpc52xx.c
@@ -76,10 +76,6 @@ static void mpc52xx_fec_stop(struct net_device *dev);
static void mpc52xx_fec_start(struct net_device *dev);
static void mpc52xx_fec_reset(struct net_device *dev);
-static u8 mpc52xx_fec_mac_addr[6];
-module_param_array_named(mac, mpc52xx_fec_mac_addr, byte, NULL, 0);
-MODULE_PARM_DESC(mac, "six hex digits, ie. 0x1,0x2,0xc0,0x01,0xba,0xbe");
-
#define MPC52xx_MESSAGES_DEFAULT ( NETIF_MSG_DRV | NETIF_MSG_PROBE | \
NETIF_MSG_LINK | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP)
static int debug = -1; /* the above default */
@@ -110,15 +106,6 @@ static void mpc52xx_fec_set_paddr(struct net_device *dev, u8 *mac)
out_be32(&fec->paddr2, (*(u16 *)(&mac[4]) << 16) | FEC_PADDR2_TYPE);
}
-static void mpc52xx_fec_get_paddr(struct net_device *dev, u8 *mac)
-{
- struct mpc52xx_fec_priv *priv = netdev_priv(dev);
- struct mpc52xx_fec __iomem *fec = priv->fec;
-
- *(u32 *)(&mac[0]) = in_be32(&fec->paddr1);
- *(u16 *)(&mac[4]) = in_be32(&fec->paddr2) >> 16;
-}
-
static int mpc52xx_fec_set_mac_address(struct net_device *dev, void *addr)
{
struct sockaddr *sock = addr;
@@ -853,6 +840,8 @@ static int mpc52xx_fec_probe(struct platform_device *op)
struct resource mem;
const u32 *prop;
int prop_size;
+ struct device_node *np = op->dev.of_node;
+ const void *p;
phys_addr_t rx_fifo;
phys_addr_t tx_fifo;
@@ -866,7 +855,7 @@ static int mpc52xx_fec_probe(struct platform_device *op)
priv->ndev = ndev;
/* Reserve FEC control zone */
- rv = of_address_to_resource(op->dev.of_node, 0, &mem);
+ rv = of_address_to_resource(np, 0, &mem);
if (rv) {
printk(KERN_ERR DRIVER_NAME ": "
"Error while parsing device node resource\n" );
@@ -919,7 +908,7 @@ static int mpc52xx_fec_probe(struct platform_device *op)
/* Get the IRQ we need one by one */
/* Control */
- ndev->irq = irq_of_parse_and_map(op->dev.of_node, 0);
+ ndev->irq = irq_of_parse_and_map(np, 0);
/* RX */
priv->r_irq = bcom_get_task_irq(priv->rx_dmatsk);
@@ -927,11 +916,33 @@ static int mpc52xx_fec_probe(struct platform_device *op)
/* TX */
priv->t_irq = bcom_get_task_irq(priv->tx_dmatsk);
- /* MAC address init */
- if (!is_zero_ether_addr(mpc52xx_fec_mac_addr))
- memcpy(ndev->dev_addr, mpc52xx_fec_mac_addr, 6);
- else
- mpc52xx_fec_get_paddr(ndev, ndev->dev_addr);
+ /*
+ * MAC address init:
+ *
+ * First try to read MAC address from DT
+ */
+ p = of_get_property(np, "local-mac-address", NULL);
+ if (p != NULL) {
+ memcpy(ndev->dev_addr, p, 6);
+ } else {
+ struct mpc52xx_fec __iomem *fec = priv->fec;
+
+ /*
+ * If the MAC addresse is not provided via DT then read
+ * it back from the controller regs
+ */
+ *(u32 *)(&ndev->dev_addr[0]) = in_be32(&fec->paddr1);
+ *(u16 *)(&ndev->dev_addr[4]) = in_be32(&fec->paddr2) >> 16;
+ }
+
+ /*
+ * Check if the MAC address is valid, if not get a random one
+ */
+ if (!is_valid_ether_addr(ndev->dev_addr)) {
+ eth_hw_addr_random(ndev);
+ dev_warn(&ndev->dev, "using random MAC address %pM\n",
+ ndev->dev_addr);
+ }
priv->msg_enable = netif_msg_init(debug, MPC52xx_MESSAGES_DEFAULT);
@@ -942,20 +953,20 @@ static int mpc52xx_fec_probe(struct platform_device *op)
/* Start with safe defaults for link connection */
priv->speed = 100;
priv->duplex = DUPLEX_HALF;
- priv->mdio_speed = ((mpc5xxx_get_bus_frequency(op->dev.of_node) >> 20) / 5) << 1;
+ priv->mdio_speed = ((mpc5xxx_get_bus_frequency(np) >> 20) / 5) << 1;
/* The current speed preconfigures the speed of the MII link */
- prop = of_get_property(op->dev.of_node, "current-speed", &prop_size);
+ prop = of_get_property(np, "current-speed", &prop_size);
if (prop && (prop_size >= sizeof(u32) * 2)) {
priv->speed = prop[0];
priv->duplex = prop[1] ? DUPLEX_FULL : DUPLEX_HALF;
}
/* If there is a phy handle, then get the PHY node */
- priv->phy_node = of_parse_phandle(op->dev.of_node, "phy-handle", 0);
+ priv->phy_node = of_parse_phandle(np, "phy-handle", 0);
/* the 7-wire property means don't use MII mode */
- if (of_find_property(op->dev.of_node, "fsl,7-wire-mode", NULL)) {
+ if (of_find_property(np, "fsl,7-wire-mode", NULL)) {
priv->seven_wire_mode = 1;
dev_info(&ndev->dev, "using 7-wire PHY mode\n");
}
@@ -970,6 +981,8 @@ static int mpc52xx_fec_probe(struct platform_device *op)
/* We're done ! */
dev_set_drvdata(&op->dev, ndev);
+ printk(KERN_INFO "%s: %s MAC %pM\n",
+ ndev->name, op->dev.of_node->full_name, ndev->dev_addr);
return 0;
--
1.8.1.3
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists