[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1369705756-11171-1-git-send-email-amwang@redhat.com>
Date: Tue, 28 May 2013 09:49:16 +0800
From: Cong Wang <amwang@...hat.com>
To: netdev@...r.kernel.org
Cc: Stephen Hemminger <stephen@...workplumber.org>,
Jay Vosburgh <fubar@...ibm.com>,
"David S. Miller" <davem@...emloft.net>,
Cong Wang <amwang@...hat.com>
Subject: [Patch net-next] bonding: remove ifenslave.c from kernel source
From: Cong Wang <amwang@...hat.com>
As Stephen proposed:
Since bonding supports configuration via iproute (netlink) and sysfs, I think
it is time to purge the old ifenslave code out of Documentation/networking
and update the documentation.
Suggested-by: Stephen Hemminger <stephen@...workplumber.org>
Cc: Stephen Hemminger <stephen@...workplumber.org>
Cc: Jay Vosburgh <fubar@...ibm.com>
Cc: "David S. Miller" <davem@...emloft.net>
Signed-off-by: Cong Wang <amwang@...hat.com>
---
diff --git a/Documentation/networking/.gitignore b/Documentation/networking/.gitignore
index 286a568..e69de29 100644
--- a/Documentation/networking/.gitignore
+++ b/Documentation/networking/.gitignore
@@ -1 +0,0 @@
-ifenslave
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
index 258d9b9..32dfbd9 100644
--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@@ -88,8 +88,6 @@ gianfar.txt
- Gianfar Ethernet Driver.
ieee802154.txt
- Linux IEEE 802.15.4 implementation, API and drivers
-ifenslave.c
- - Configure network interfaces for parallel routing (bonding).
igb.txt
- README for the Intel Gigabit Ethernet Driver (igb).
igbvf.txt
diff --git a/Documentation/networking/Makefile b/Documentation/networking/Makefile
index 24c308d..0aa1ac9 100644
--- a/Documentation/networking/Makefile
+++ b/Documentation/networking/Makefile
@@ -1,11 +1,6 @@
# kbuild trick to avoid linker error. Can be omitted if a module is built.
obj- := dummy.o
-# List of programs to build
-hostprogs-y := ifenslave
-
-HOSTCFLAGS_ifenslave.o += -I$(objtree)/usr/include
-
# Tell kbuild to always build the programs
always := $(hostprogs-y)
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index 10a015c..e7454fc 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -104,8 +104,7 @@ Table of Contents
==============================
Most popular distro kernels ship with the bonding driver
-already available as a module and the ifenslave user level control
-program installed and ready for use. If your distro does not, or you
+already available as a module. If your distro does not, or you
have need to compile bonding from source (e.g., configuring and
installing a mainline kernel from kernel.org), you'll need to perform
the following steps:
@@ -124,46 +123,13 @@ device support" section. It is recommended that you configure the
driver as module since it is currently the only way to pass parameters
to the driver or configure more than one bonding device.
- Build and install the new kernel and modules, then continue
-below to install ifenslave.
+ Build and install the new kernel and modules.
-1.2 Install ifenslave Control Utility
+1.2 Bonding Control Utility
-------------------------------------
- The ifenslave user level control program is included in the
-kernel source tree, in the file Documentation/networking/ifenslave.c.
-It is generally recommended that you use the ifenslave that
-corresponds to the kernel that you are using (either from the same
-source tree or supplied with the distro), however, ifenslave
-executables from older kernels should function (but features newer
-than the ifenslave release are not supported). Running an ifenslave
-that is newer than the kernel is not supported, and may or may not
-work.
-
- To install ifenslave, do the following:
-
-# gcc -Wall -O -I/usr/src/linux/include ifenslave.c -o ifenslave
-# cp ifenslave /sbin/ifenslave
-
- If your kernel source is not in "/usr/src/linux," then replace
-"/usr/src/linux/include" in the above with the location of your kernel
-source include directory.
-
- You may wish to back up any existing /sbin/ifenslave, or, for
-testing or informal use, tag the ifenslave to the kernel version
-(e.g., name the ifenslave executable /sbin/ifenslave-2.6.10).
-
-IMPORTANT NOTE:
-
- If you omit the "-I" or specify an incorrect directory, you
-may end up with an ifenslave that is incompatible with the kernel
-you're trying to build it for. Some distros (e.g., Red Hat from 7.1
-onwards) do not have /usr/include/linux symbolically linked to the
-default kernel source include directory.
-
-SECOND IMPORTANT NOTE:
- If you plan to configure bonding using sysfs or using the
-/etc/network/interfaces file, you do not need to use ifenslave.
+ It is recommended to configure bonding via iproute2 (netlink)
+or sysfs, the old ifenslave control utility is obsolete.
2. Bonding Driver Options
=========================
@@ -851,7 +817,7 @@ resend_igmp
==============================
You can configure bonding using either your distro's network
-initialization scripts, or manually using either ifenslave or the
+initialization scripts, or manually using either iproute2 or the
sysfs interface. Distros generally use one of three packages for the
network initialization scripts: initscripts, sysconfig or interfaces.
Recent versions of these packages have support for bonding, while older
@@ -1160,7 +1126,7 @@ not support this method for specifying multiple bonding interfaces; for
those instances, see the "Configuring Multiple Bonds Manually" section,
below.
-3.3 Configuring Bonding Manually with Ifenslave
+3.3 Configuring Bonding Manually with iproute2
-----------------------------------------------
This section applies to distros whose network initialization
@@ -1171,7 +1137,7 @@ version 8.
The general method for these systems is to place the bonding
module parameters into a config file in /etc/modprobe.d/ (as
appropriate for the installed distro), then add modprobe and/or
-ifenslave commands to the system's global init script. The name of
+`ip link` commands to the system's global init script. The name of
the global init script differs; for sysconfig, it is
/etc/init.d/boot.local and for initscripts it is /etc/rc.d/rc.local.
@@ -1183,8 +1149,8 @@ reboots, edit the appropriate file (/etc/init.d/boot.local or
modprobe bonding mode=balance-alb miimon=100
modprobe e100
ifconfig bond0 192.168.1.1 netmask 255.255.255.0 up
-ifenslave bond0 eth0
-ifenslave bond0 eth1
+ip link set eth0 master bond0
+ip link set eth1 master bond0
Replace the example bonding module parameters and bond0
network configuration (IP address, netmask, etc) with the appropriate
diff --git a/Documentation/networking/ifenslave.c b/Documentation/networking/ifenslave.c
deleted file mode 100644
index ac5debb..0000000
--- a/Documentation/networking/ifenslave.c
+++ /dev/null
@@ -1,1105 +0,0 @@
-/* Mode: C;
- * ifenslave.c: Configure network interfaces for parallel routing.
- *
- * This program controls the Linux implementation of running multiple
- * network interfaces in parallel.
- *
- * Author: Donald Becker <becker@...dis.gsfc.nasa.gov>
- * Copyright 1994-1996 Donald Becker
- *
- * This program is free software; you can redistribute it
- * and/or modify it under the terms of the GNU General Public
- * License as published by the Free Software Foundation.
- *
- * The author may be reached as becker@...DIS.gsfc.nasa.gov, or C/O
- * Center of Excellence in Space Data and Information Sciences
- * Code 930.5, Goddard Space Flight Center, Greenbelt MD 20771
- *
- * Changes :
- * - 2000/10/02 Willy Tarreau <willy at meta-x.org> :
- * - few fixes. Master's MAC address is now correctly taken from
- * the first device when not previously set ;
- * - detach support : call BOND_RELEASE to detach an enslaved interface.
- * - give a mini-howto from command-line help : # ifenslave -h
- *
- * - 2001/02/16 Chad N. Tindel <ctindel at ieee dot org> :
- * - Master is now brought down before setting the MAC address. In
- * the 2.4 kernel you can't change the MAC address while the device is
- * up because you get EBUSY.
- *
- * - 2001/09/13 Takao Indoh <indou dot takao at jp dot fujitsu dot com>
- * - Added the ability to change the active interface on a mode 1 bond
- * at runtime.
- *
- * - 2001/10/23 Chad N. Tindel <ctindel at ieee dot org> :
- * - No longer set the MAC address of the master. The bond device will
- * take care of this itself
- * - Try the SIOC*** versions of the bonding ioctls before using the
- * old versions
- * - 2002/02/18 Erik Habbinga <erik_habbinga @ hp dot com> :
- * - ifr2.ifr_flags was not initialized in the hwaddr_notset case,
- * SIOCGIFFLAGS now called before hwaddr_notset test
- *
- * - 2002/10/31 Tony Cureington <tony.cureington * hp_com> :
- * - If the master does not have a hardware address when the first slave
- * is enslaved, the master is assigned the hardware address of that
- * slave - there is a comment in bonding.c stating "ifenslave takes
- * care of this now." This corrects the problem of slaves having
- * different hardware addresses in active-backup mode when
- * multiple interfaces are specified on a single ifenslave command
- * (ifenslave bond0 eth0 eth1).
- *
- * - 2003/03/18 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
- * Shmulik Hen <shmulik.hen at intel dot com>
- * - Moved setting the slave's mac address and openning it, from
- * the application to the driver. This enables support of modes
- * that need to use the unique mac address of each slave.
- * The driver also takes care of closing the slave and restoring its
- * original mac address upon release.
- * In addition, block possibility of enslaving before the master is up.
- * This prevents putting the system in an undefined state.
- *
- * - 2003/05/01 - Amir Noam <amir.noam at intel dot com>
- * - Added ABI version control to restore compatibility between
- * new/old ifenslave and new/old bonding.
- * - Prevent adding an adapter that is already a slave.
- * Fixes the problem of stalling the transmission and leaving
- * the slave in a down state.
- *
- * - 2003/05/01 - Shmulik Hen <shmulik.hen at intel dot com>
- * - Prevent enslaving if the bond device is down.
- * Fixes the problem of leaving the system in unstable state and
- * halting when trying to remove the module.
- * - Close socket on all abnormal exists.
- * - Add versioning scheme that follows that of the bonding driver.
- * current version is 1.0.0 as a base line.
- *
- * - 2003/05/22 - Jay Vosburgh <fubar at us dot ibm dot com>
- * - ifenslave -c was broken; it's now fixed
- * - Fixed problem with routes vanishing from master during enslave
- * processing.
- *
- * - 2003/05/27 - Amir Noam <amir.noam at intel dot com>
- * - Fix backward compatibility issues:
- * For drivers not using ABI versions, slave was set down while
- * it should be left up before enslaving.
- * Also, master was not set down and the default set_mac_address()
- * would fail and generate an error message in the system log.
- * - For opt_c: slave should not be set to the master's setting
- * while it is running. It was already set during enslave. To
- * simplify things, it is now handled separately.
- *
- * - 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com>
- * - Code cleanup and style changes
- * set version to 1.1.0
- */
-
-#define APP_VERSION "1.1.0"
-#define APP_RELDATE "December 1, 2003"
-#define APP_NAME "ifenslave"
-
-static char *version =
-APP_NAME ".c:v" APP_VERSION " (" APP_RELDATE ")\n"
-"o Donald Becker (becker@...dis.gsfc.nasa.gov).\n"
-"o Detach support added on 2000/10/02 by Willy Tarreau (willy at meta-x.org).\n"
-"o 2.4 kernel support added on 2001/02/16 by Chad N. Tindel\n"
-" (ctindel at ieee dot org).\n";
-
-static const char *usage_msg =
-"Usage: ifenslave [-f] <master-if> <slave-if> [<slave-if>...]\n"
-" ifenslave -d <master-if> <slave-if> [<slave-if>...]\n"
-" ifenslave -c <master-if> <slave-if>\n"
-" ifenslave --help\n";
-
-static const char *help_msg =
-"\n"
-" To create a bond device, simply follow these three steps :\n"
-" - ensure that the required drivers are properly loaded :\n"
-" # modprobe bonding ; modprobe <3c59x|eepro100|pcnet32|tulip|...>\n"
-" - assign an IP address to the bond device :\n"
-" # ifconfig bond0 <addr> netmask <mask> broadcast <bcast>\n"
-" - attach all the interfaces you need to the bond device :\n"
-" # ifenslave [{-f|--force}] bond0 eth0 [eth1 [eth2]...]\n"
-" If bond0 didn't have a MAC address, it will take eth0's. Then, all\n"
-" interfaces attached AFTER this assignment will get the same MAC addr.\n"
-" (except for ALB/TLB modes)\n"
-"\n"
-" To set the bond device down and automatically release all the slaves :\n"
-" # ifconfig bond0 down\n"
-"\n"
-" To detach a dead interface without setting the bond device down :\n"
-" # ifenslave {-d|--detach} bond0 eth0 [eth1 [eth2]...]\n"
-"\n"
-" To change active slave :\n"
-" # ifenslave {-c|--change-active} bond0 eth0\n"
-"\n"
-" To show master interface info\n"
-" # ifenslave bond0\n"
-"\n"
-" To show all interfaces info\n"
-" # ifenslave {-a|--all-interfaces}\n"
-"\n"
-" To be more verbose\n"
-" # ifenslave {-v|--verbose} ...\n"
-"\n"
-" # ifenslave {-u|--usage} Show usage\n"
-" # ifenslave {-V|--version} Show version\n"
-" # ifenslave {-h|--help} This message\n"
-"\n";
-
-#include <unistd.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <ctype.h>
-#include <string.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <getopt.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <sys/ioctl.h>
-#include <linux/if.h>
-#include <net/if_arp.h>
-#include <linux/if_ether.h>
-#include <linux/if_bonding.h>
-#include <linux/sockios.h>
-
-typedef unsigned long long u64; /* hack, so we may include kernel's ethtool.h */
-typedef __uint32_t u32; /* ditto */
-typedef __uint16_t u16; /* ditto */
-typedef __uint8_t u8; /* ditto */
-#include <linux/ethtool.h>
-
-struct option longopts[] = {
- /* { name has_arg *flag val } */
- {"all-interfaces", 0, 0, 'a'}, /* Show all interfaces. */
- {"change-active", 0, 0, 'c'}, /* Change the active slave. */
- {"detach", 0, 0, 'd'}, /* Detach a slave interface. */
- {"force", 0, 0, 'f'}, /* Force the operation. */
- {"help", 0, 0, 'h'}, /* Give help */
- {"usage", 0, 0, 'u'}, /* Give usage */
- {"verbose", 0, 0, 'v'}, /* Report each action taken. */
- {"version", 0, 0, 'V'}, /* Emit version information. */
- { 0, 0, 0, 0}
-};
-
-/* Command-line flags. */
-unsigned int
-opt_a = 0, /* Show-all-interfaces flag. */
-opt_c = 0, /* Change-active-slave flag. */
-opt_d = 0, /* Detach a slave interface. */
-opt_f = 0, /* Force the operation. */
-opt_h = 0, /* Help */
-opt_u = 0, /* Usage */
-opt_v = 0, /* Verbose flag. */
-opt_V = 0; /* Version */
-
-int skfd = -1; /* AF_INET socket for ioctl() calls.*/
-int abi_ver = 0; /* userland - kernel ABI version */
-int hwaddr_set = 0; /* Master's hwaddr is set */
-int saved_errno;
-
-struct ifreq master_mtu, master_flags, master_hwaddr;
-struct ifreq slave_mtu, slave_flags, slave_hwaddr;
-
-struct dev_ifr {
- struct ifreq *req_ifr;
- char *req_name;
- int req_type;
-};
-
-struct dev_ifr master_ifra[] = {
- {&master_mtu, "SIOCGIFMTU", SIOCGIFMTU},
- {&master_flags, "SIOCGIFFLAGS", SIOCGIFFLAGS},
- {&master_hwaddr, "SIOCGIFHWADDR", SIOCGIFHWADDR},
- {NULL, "", 0}
-};
-
-struct dev_ifr slave_ifra[] = {
- {&slave_mtu, "SIOCGIFMTU", SIOCGIFMTU},
- {&slave_flags, "SIOCGIFFLAGS", SIOCGIFFLAGS},
- {&slave_hwaddr, "SIOCGIFHWADDR", SIOCGIFHWADDR},
- {NULL, "", 0}
-};
-
-static void if_print(char *ifname);
-static int get_drv_info(char *master_ifname);
-static int get_if_settings(char *ifname, struct dev_ifr ifra[]);
-static int get_slave_flags(char *slave_ifname);
-static int set_master_hwaddr(char *master_ifname, struct sockaddr *hwaddr);
-static int set_slave_hwaddr(char *slave_ifname, struct sockaddr *hwaddr);
-static int set_slave_mtu(char *slave_ifname, int mtu);
-static int set_if_flags(char *ifname, short flags);
-static int set_if_up(char *ifname, short flags);
-static int set_if_down(char *ifname, short flags);
-static int clear_if_addr(char *ifname);
-static int set_if_addr(char *master_ifname, char *slave_ifname);
-static int change_active(char *master_ifname, char *slave_ifname);
-static int enslave(char *master_ifname, char *slave_ifname);
-static int release(char *master_ifname, char *slave_ifname);
-#define v_print(fmt, args...) \
- if (opt_v) \
- fprintf(stderr, fmt, ## args )
-
-int main(int argc, char *argv[])
-{
- char **spp, *master_ifname, *slave_ifname;
- int c, i, rv;
- int res = 0;
- int exclusive = 0;
-
- while ((c = getopt_long(argc, argv, "acdfhuvV", longopts, 0)) != EOF) {
- switch (c) {
- case 'a': opt_a++; exclusive++; break;
- case 'c': opt_c++; exclusive++; break;
- case 'd': opt_d++; exclusive++; break;
- case 'f': opt_f++; exclusive++; break;
- case 'h': opt_h++; exclusive++; break;
- case 'u': opt_u++; exclusive++; break;
- case 'v': opt_v++; break;
- case 'V': opt_V++; exclusive++; break;
-
- case '?':
- fprintf(stderr, "%s", usage_msg);
- res = 2;
- goto out;
- }
- }
-
- /* options check */
- if (exclusive > 1) {
- fprintf(stderr, "%s", usage_msg);
- res = 2;
- goto out;
- }
-
- if (opt_v || opt_V) {
- printf("%s", version);
- if (opt_V) {
- res = 0;
- goto out;
- }
- }
-
- if (opt_u) {
- printf("%s", usage_msg);
- res = 0;
- goto out;
- }
-
- if (opt_h) {
- printf("%s", usage_msg);
- printf("%s", help_msg);
- res = 0;
- goto out;
- }
-
- /* Open a basic socket */
- if ((skfd = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
- perror("socket");
- res = 1;
- goto out;
- }
-
- if (opt_a) {
- if (optind == argc) {
- /* No remaining args */
- /* show all interfaces */
- if_print((char *)NULL);
- goto out;
- } else {
- /* Just show usage */
- fprintf(stderr, "%s", usage_msg);
- res = 2;
- goto out;
- }
- }
-
- /* Copy the interface name */
- spp = argv + optind;
- master_ifname = *spp++;
-
- if (master_ifname == NULL) {
- fprintf(stderr, "%s", usage_msg);
- res = 2;
- goto out;
- }
-
- /* exchange abi version with bonding module */
- res = get_drv_info(master_ifname);
- if (res) {
- fprintf(stderr,
- "Master '%s': Error: handshake with driver failed. "
- "Aborting\n",
- master_ifname);
- goto out;
- }
-
- slave_ifname = *spp++;
-
- if (slave_ifname == NULL) {
- if (opt_d || opt_c) {
- fprintf(stderr, "%s", usage_msg);
- res = 2;
- goto out;
- }
-
- /* A single arg means show the
- * configuration for this interface
- */
- if_print(master_ifname);
- goto out;
- }
-
- res = get_if_settings(master_ifname, master_ifra);
- if (res) {
- /* Probably a good reason not to go on */
- fprintf(stderr,
- "Master '%s': Error: get settings failed: %s. "
- "Aborting\n",
- master_ifname, strerror(res));
- goto out;
- }
-
- /* check if master is indeed a master;
- * if not then fail any operation
- */
- if (!(master_flags.ifr_flags & IFF_MASTER)) {
- fprintf(stderr,
- "Illegal operation; the specified interface '%s' "
- "is not a master. Aborting\n",
- master_ifname);
- res = 1;
- goto out;
- }
-
- /* check if master is up; if not then fail any operation */
- if (!(master_flags.ifr_flags & IFF_UP)) {
- fprintf(stderr,
- "Illegal operation; the specified master interface "
- "'%s' is not up.\n",
- master_ifname);
- res = 1;
- goto out;
- }
-
- /* Only for enslaving */
- if (!opt_c && !opt_d) {
- sa_family_t master_family = master_hwaddr.ifr_hwaddr.sa_family;
- unsigned char *hwaddr =
- (unsigned char *)master_hwaddr.ifr_hwaddr.sa_data;
-
- /* The family '1' is ARPHRD_ETHER for ethernet. */
- if (master_family != 1 && !opt_f) {
- fprintf(stderr,
- "Illegal operation: The specified master "
- "interface '%s' is not ethernet-like.\n "
- "This program is designed to work with "
- "ethernet-like network interfaces.\n "
- "Use the '-f' option to force the "
- "operation.\n",
- master_ifname);
- res = 1;
- goto out;
- }
-
- /* Check master's hw addr */
- for (i = 0; i < 6; i++) {
- if (hwaddr[i] != 0) {
- hwaddr_set = 1;
- break;
- }
- }
-
- if (hwaddr_set) {
- v_print("current hardware address of master '%s' "
- "is %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, "
- "type %d\n",
- master_ifname,
- hwaddr[0], hwaddr[1],
- hwaddr[2], hwaddr[3],
- hwaddr[4], hwaddr[5],
- master_family);
- }
- }
-
- /* Accepts only one slave */
- if (opt_c) {
- /* change active slave */
- res = get_slave_flags(slave_ifname);
- if (res) {
- fprintf(stderr,
- "Slave '%s': Error: get flags failed. "
- "Aborting\n",
- slave_ifname);
- goto out;
- }
- res = change_active(master_ifname, slave_ifname);
- if (res) {
- fprintf(stderr,
- "Master '%s', Slave '%s': Error: "
- "Change active failed\n",
- master_ifname, slave_ifname);
- }
- } else {
- /* Accept multiple slaves */
- do {
- if (opt_d) {
- /* detach a slave interface from the master */
- rv = get_slave_flags(slave_ifname);
- if (rv) {
- /* Can't work with this slave. */
- /* remember the error and skip it*/
- fprintf(stderr,
- "Slave '%s': Error: get flags "
- "failed. Skipping\n",
- slave_ifname);
- res = rv;
- continue;
- }
- rv = release(master_ifname, slave_ifname);
- if (rv) {
- fprintf(stderr,
- "Master '%s', Slave '%s': Error: "
- "Release failed\n",
- master_ifname, slave_ifname);
- res = rv;
- }
- } else {
- /* attach a slave interface to the master */
- rv = get_if_settings(slave_ifname, slave_ifra);
- if (rv) {
- /* Can't work with this slave. */
- /* remember the error and skip it*/
- fprintf(stderr,
- "Slave '%s': Error: get "
- "settings failed: %s. "
- "Skipping\n",
- slave_ifname, strerror(rv));
- res = rv;
- continue;
- }
- rv = enslave(master_ifname, slave_ifname);
- if (rv) {
- fprintf(stderr,
- "Master '%s', Slave '%s': Error: "
- "Enslave failed\n",
- master_ifname, slave_ifname);
- res = rv;
- }
- }
- } while ((slave_ifname = *spp++) != NULL);
- }
-
-out:
- if (skfd >= 0) {
- close(skfd);
- }
-
- return res;
-}
-
-static short mif_flags;
-
-/* Get the inteface configuration from the kernel. */
-static int if_getconfig(char *ifname)
-{
- struct ifreq ifr;
- int metric, mtu; /* Parameters of the master interface. */
- struct sockaddr dstaddr, broadaddr, netmask;
- unsigned char *hwaddr;
-
- strcpy(ifr.ifr_name, ifname);
- if (ioctl(skfd, SIOCGIFFLAGS, &ifr) < 0)
- return -1;
- mif_flags = ifr.ifr_flags;
- printf("The result of SIOCGIFFLAGS on %s is %x.\n",
- ifname, ifr.ifr_flags);
-
- strcpy(ifr.ifr_name, ifname);
- if (ioctl(skfd, SIOCGIFADDR, &ifr) < 0)
- return -1;
- printf("The result of SIOCGIFADDR is %2.2x.%2.2x.%2.2x.%2.2x.\n",
- ifr.ifr_addr.sa_data[0], ifr.ifr_addr.sa_data[1],
- ifr.ifr_addr.sa_data[2], ifr.ifr_addr.sa_data[3]);
-
- strcpy(ifr.ifr_name, ifname);
- if (ioctl(skfd, SIOCGIFHWADDR, &ifr) < 0)
- return -1;
-
- /* Gotta convert from 'char' to unsigned for printf(). */
- hwaddr = (unsigned char *)ifr.ifr_hwaddr.sa_data;
- printf("The result of SIOCGIFHWADDR is type %d "
- "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x.\n",
- ifr.ifr_hwaddr.sa_family, hwaddr[0], hwaddr[1],
- hwaddr[2], hwaddr[3], hwaddr[4], hwaddr[5]);
-
- strcpy(ifr.ifr_name, ifname);
- if (ioctl(skfd, SIOCGIFMETRIC, &ifr) < 0) {
- metric = 0;
- } else
- metric = ifr.ifr_metric;
- printf("The result of SIOCGIFMETRIC is %d\n", metric);
-
- strcpy(ifr.ifr_name, ifname);
- if (ioctl(skfd, SIOCGIFMTU, &ifr) < 0)
- mtu = 0;
- else
- mtu = ifr.ifr_mtu;
- printf("The result of SIOCGIFMTU is %d\n", mtu);
-
- strcpy(ifr.ifr_name, ifname);
- if (ioctl(skfd, SIOCGIFDSTADDR, &ifr) < 0) {
- memset(&dstaddr, 0, sizeof(struct sockaddr));
- } else
- dstaddr = ifr.ifr_dstaddr;
-
- strcpy(ifr.ifr_name, ifname);
- if (ioctl(skfd, SIOCGIFBRDADDR, &ifr) < 0) {
- memset(&broadaddr, 0, sizeof(struct sockaddr));
- } else
- broadaddr = ifr.ifr_broadaddr;
-
- strcpy(ifr.ifr_name, ifname);
- if (ioctl(skfd, SIOCGIFNETMASK, &ifr) < 0) {
- memset(&netmask, 0, sizeof(struct sockaddr));
- } else
- netmask = ifr.ifr_netmask;
-
- return 0;
-}
-
-static void if_print(char *ifname)
-{
- char buff[1024];
- struct ifconf ifc;
- struct ifreq *ifr;
- int i;
-
- if (ifname == (char *)NULL) {
- ifc.ifc_len = sizeof(buff);
- ifc.ifc_buf = buff;
- if (ioctl(skfd, SIOCGIFCONF, &ifc) < 0) {
- perror("SIOCGIFCONF failed");
- return;
- }
-
- ifr = ifc.ifc_req;
- for (i = ifc.ifc_len / sizeof(struct ifreq); --i >= 0; ifr++) {
- if (if_getconfig(ifr->ifr_name) < 0) {
- fprintf(stderr,
- "%s: unknown interface.\n",
- ifr->ifr_name);
- continue;
- }
-
- if (((mif_flags & IFF_UP) == 0) && !opt_a) continue;
- /*ife_print(&ife);*/
- }
- } else {
- if (if_getconfig(ifname) < 0) {
- fprintf(stderr,
- "%s: unknown interface.\n", ifname);
- }
- }
-}
-
-static int get_drv_info(char *master_ifname)
-{
- struct ifreq ifr;
- struct ethtool_drvinfo info;
- char *endptr;
-
- memset(&ifr, 0, sizeof(ifr));
- strncpy(ifr.ifr_name, master_ifname, IFNAMSIZ);
- ifr.ifr_data = (caddr_t)&info;
-
- info.cmd = ETHTOOL_GDRVINFO;
- strncpy(info.driver, "ifenslave", 32);
- snprintf(info.fw_version, 32, "%d", BOND_ABI_VERSION);
-
- if (ioctl(skfd, SIOCETHTOOL, &ifr) < 0) {
- if (errno == EOPNOTSUPP) {
- goto out;
- }
-
- saved_errno = errno;
- v_print("Master '%s': Error: get bonding info failed %s\n",
- master_ifname, strerror(saved_errno));
- return 1;
- }
-
- abi_ver = strtoul(info.fw_version, &endptr, 0);
- if (*endptr) {
- v_print("Master '%s': Error: got invalid string as an ABI "
- "version from the bonding module\n",
- master_ifname);
- return 1;
- }
-
-out:
- v_print("ABI ver is %d\n", abi_ver);
-
- return 0;
-}
-
-static int change_active(char *master_ifname, char *slave_ifname)
-{
- struct ifreq ifr;
- int res = 0;
-
- if (!(slave_flags.ifr_flags & IFF_SLAVE)) {
- fprintf(stderr,
- "Illegal operation: The specified slave interface "
- "'%s' is not a slave\n",
- slave_ifname);
- return 1;
- }
-
- strncpy(ifr.ifr_name, master_ifname, IFNAMSIZ);
- strncpy(ifr.ifr_slave, slave_ifname, IFNAMSIZ);
- if ((ioctl(skfd, SIOCBONDCHANGEACTIVE, &ifr) < 0) &&
- (ioctl(skfd, BOND_CHANGE_ACTIVE_OLD, &ifr) < 0)) {
- saved_errno = errno;
- v_print("Master '%s': Error: SIOCBONDCHANGEACTIVE failed: "
- "%s\n",
- master_ifname, strerror(saved_errno));
- res = 1;
- }
-
- return res;
-}
-
-static int enslave(char *master_ifname, char *slave_ifname)
-{
- struct ifreq ifr;
- int res = 0;
-
- if (slave_flags.ifr_flags & IFF_SLAVE) {
- fprintf(stderr,
- "Illegal operation: The specified slave interface "
- "'%s' is already a slave\n",
- slave_ifname);
- return 1;
- }
-
- res = set_if_down(slave_ifname, slave_flags.ifr_flags);
- if (res) {
- fprintf(stderr,
- "Slave '%s': Error: bring interface down failed\n",
- slave_ifname);
- return res;
- }
-
- if (abi_ver < 2) {
- /* Older bonding versions would panic if the slave has no IP
- * address, so get the IP setting from the master.
- */
- set_if_addr(master_ifname, slave_ifname);
- } else {
- res = clear_if_addr(slave_ifname);
- if (res) {
- fprintf(stderr,
- "Slave '%s': Error: clear address failed\n",
- slave_ifname);
- return res;
- }
- }
-
- if (master_mtu.ifr_mtu != slave_mtu.ifr_mtu) {
- res = set_slave_mtu(slave_ifname, master_mtu.ifr_mtu);
- if (res) {
- fprintf(stderr,
- "Slave '%s': Error: set MTU failed\n",
- slave_ifname);
- return res;
- }
- }
-
- if (hwaddr_set) {
- /* Master already has an hwaddr
- * so set it's hwaddr to the slave
- */
- if (abi_ver < 1) {
- /* The driver is using an old ABI, so
- * the application sets the slave's
- * hwaddr
- */
- res = set_slave_hwaddr(slave_ifname,
- &(master_hwaddr.ifr_hwaddr));
- if (res) {
- fprintf(stderr,
- "Slave '%s': Error: set hw address "
- "failed\n",
- slave_ifname);
- goto undo_mtu;
- }
-
- /* For old ABI the application needs to bring the
- * slave back up
- */
- res = set_if_up(slave_ifname, slave_flags.ifr_flags);
- if (res) {
- fprintf(stderr,
- "Slave '%s': Error: bring interface "
- "down failed\n",
- slave_ifname);
- goto undo_slave_mac;
- }
- }
- /* The driver is using a new ABI,
- * so the driver takes care of setting
- * the slave's hwaddr and bringing
- * it up again
- */
- } else {
- /* No hwaddr for master yet, so
- * set the slave's hwaddr to it
- */
- if (abi_ver < 1) {
- /* For old ABI, the master needs to be
- * down before setting its hwaddr
- */
- res = set_if_down(master_ifname, master_flags.ifr_flags);
- if (res) {
- fprintf(stderr,
- "Master '%s': Error: bring interface "
- "down failed\n",
- master_ifname);
- goto undo_mtu;
- }
- }
-
- res = set_master_hwaddr(master_ifname,
- &(slave_hwaddr.ifr_hwaddr));
- if (res) {
- fprintf(stderr,
- "Master '%s': Error: set hw address "
- "failed\n",
- master_ifname);
- goto undo_mtu;
- }
-
- if (abi_ver < 1) {
- /* For old ABI, bring the master
- * back up
- */
- res = set_if_up(master_ifname, master_flags.ifr_flags);
- if (res) {
- fprintf(stderr,
- "Master '%s': Error: bring interface "
- "up failed\n",
- master_ifname);
- goto undo_master_mac;
- }
- }
-
- hwaddr_set = 1;
- }
-
- /* Do the real thing */
- strncpy(ifr.ifr_name, master_ifname, IFNAMSIZ);
- strncpy(ifr.ifr_slave, slave_ifname, IFNAMSIZ);
- if ((ioctl(skfd, SIOCBONDENSLAVE, &ifr) < 0) &&
- (ioctl(skfd, BOND_ENSLAVE_OLD, &ifr) < 0)) {
- saved_errno = errno;
- v_print("Master '%s': Error: SIOCBONDENSLAVE failed: %s\n",
- master_ifname, strerror(saved_errno));
- res = 1;
- }
-
- if (res) {
- goto undo_master_mac;
- }
-
- return 0;
-
-/* rollback (best effort) */
-undo_master_mac:
- set_master_hwaddr(master_ifname, &(master_hwaddr.ifr_hwaddr));
- hwaddr_set = 0;
- goto undo_mtu;
-undo_slave_mac:
- set_slave_hwaddr(slave_ifname, &(slave_hwaddr.ifr_hwaddr));
-undo_mtu:
- set_slave_mtu(slave_ifname, slave_mtu.ifr_mtu);
- return res;
-}
-
-static int release(char *master_ifname, char *slave_ifname)
-{
- struct ifreq ifr;
- int res = 0;
-
- if (!(slave_flags.ifr_flags & IFF_SLAVE)) {
- fprintf(stderr,
- "Illegal operation: The specified slave interface "
- "'%s' is not a slave\n",
- slave_ifname);
- return 1;
- }
-
- strncpy(ifr.ifr_name, master_ifname, IFNAMSIZ);
- strncpy(ifr.ifr_slave, slave_ifname, IFNAMSIZ);
- if ((ioctl(skfd, SIOCBONDRELEASE, &ifr) < 0) &&
- (ioctl(skfd, BOND_RELEASE_OLD, &ifr) < 0)) {
- saved_errno = errno;
- v_print("Master '%s': Error: SIOCBONDRELEASE failed: %s\n",
- master_ifname, strerror(saved_errno));
- return 1;
- } else if (abi_ver < 1) {
- /* The driver is using an old ABI, so we'll set the interface
- * down to avoid any conflicts due to same MAC/IP
- */
- res = set_if_down(slave_ifname, slave_flags.ifr_flags);
- if (res) {
- fprintf(stderr,
- "Slave '%s': Error: bring interface "
- "down failed\n",
- slave_ifname);
- }
- }
-
- /* set to default mtu */
- set_slave_mtu(slave_ifname, 1500);
-
- return res;
-}
-
-static int get_if_settings(char *ifname, struct dev_ifr ifra[])
-{
- int i;
- int res = 0;
-
- for (i = 0; ifra[i].req_ifr; i++) {
- strncpy(ifra[i].req_ifr->ifr_name, ifname, IFNAMSIZ);
- res = ioctl(skfd, ifra[i].req_type, ifra[i].req_ifr);
- if (res < 0) {
- saved_errno = errno;
- v_print("Interface '%s': Error: %s failed: %s\n",
- ifname, ifra[i].req_name,
- strerror(saved_errno));
-
- return saved_errno;
- }
- }
-
- return 0;
-}
-
-static int get_slave_flags(char *slave_ifname)
-{
- int res = 0;
-
- strncpy(slave_flags.ifr_name, slave_ifname, IFNAMSIZ);
- res = ioctl(skfd, SIOCGIFFLAGS, &slave_flags);
- if (res < 0) {
- saved_errno = errno;
- v_print("Slave '%s': Error: SIOCGIFFLAGS failed: %s\n",
- slave_ifname, strerror(saved_errno));
- } else {
- v_print("Slave %s: flags %04X.\n",
- slave_ifname, slave_flags.ifr_flags);
- }
-
- return res;
-}
-
-static int set_master_hwaddr(char *master_ifname, struct sockaddr *hwaddr)
-{
- unsigned char *addr = (unsigned char *)hwaddr->sa_data;
- struct ifreq ifr;
- int res = 0;
-
- strncpy(ifr.ifr_name, master_ifname, IFNAMSIZ);
- memcpy(&(ifr.ifr_hwaddr), hwaddr, sizeof(struct sockaddr));
- res = ioctl(skfd, SIOCSIFHWADDR, &ifr);
- if (res < 0) {
- saved_errno = errno;
- v_print("Master '%s': Error: SIOCSIFHWADDR failed: %s\n",
- master_ifname, strerror(saved_errno));
- return res;
- } else {
- v_print("Master '%s': hardware address set to "
- "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x.\n",
- master_ifname, addr[0], addr[1], addr[2],
- addr[3], addr[4], addr[5]);
- }
-
- return res;
-}
-
-static int set_slave_hwaddr(char *slave_ifname, struct sockaddr *hwaddr)
-{
- unsigned char *addr = (unsigned char *)hwaddr->sa_data;
- struct ifreq ifr;
- int res = 0;
-
- strncpy(ifr.ifr_name, slave_ifname, IFNAMSIZ);
- memcpy(&(ifr.ifr_hwaddr), hwaddr, sizeof(struct sockaddr));
- res = ioctl(skfd, SIOCSIFHWADDR, &ifr);
- if (res < 0) {
- saved_errno = errno;
-
- v_print("Slave '%s': Error: SIOCSIFHWADDR failed: %s\n",
- slave_ifname, strerror(saved_errno));
-
- if (saved_errno == EBUSY) {
- v_print(" The device is busy: it must be idle "
- "before running this command.\n");
- } else if (saved_errno == EOPNOTSUPP) {
- v_print(" The device does not support setting "
- "the MAC address.\n"
- " Your kernel likely does not support slave "
- "devices.\n");
- } else if (saved_errno == EINVAL) {
- v_print(" The device's address type does not match "
- "the master's address type.\n");
- }
- return res;
- } else {
- v_print("Slave '%s': hardware address set to "
- "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x.\n",
- slave_ifname, addr[0], addr[1], addr[2],
- addr[3], addr[4], addr[5]);
- }
-
- return res;
-}
-
-static int set_slave_mtu(char *slave_ifname, int mtu)
-{
- struct ifreq ifr;
- int res = 0;
-
- ifr.ifr_mtu = mtu;
- strncpy(ifr.ifr_name, slave_ifname, IFNAMSIZ);
-
- res = ioctl(skfd, SIOCSIFMTU, &ifr);
- if (res < 0) {
- saved_errno = errno;
- v_print("Slave '%s': Error: SIOCSIFMTU failed: %s\n",
- slave_ifname, strerror(saved_errno));
- } else {
- v_print("Slave '%s': MTU set to %d.\n", slave_ifname, mtu);
- }
-
- return res;
-}
-
-static int set_if_flags(char *ifname, short flags)
-{
- struct ifreq ifr;
- int res = 0;
-
- ifr.ifr_flags = flags;
- strncpy(ifr.ifr_name, ifname, IFNAMSIZ);
-
- res = ioctl(skfd, SIOCSIFFLAGS, &ifr);
- if (res < 0) {
- saved_errno = errno;
- v_print("Interface '%s': Error: SIOCSIFFLAGS failed: %s\n",
- ifname, strerror(saved_errno));
- } else {
- v_print("Interface '%s': flags set to %04X.\n", ifname, flags);
- }
-
- return res;
-}
-
-static int set_if_up(char *ifname, short flags)
-{
- return set_if_flags(ifname, flags | IFF_UP);
-}
-
-static int set_if_down(char *ifname, short flags)
-{
- return set_if_flags(ifname, flags & ~IFF_UP);
-}
-
-static int clear_if_addr(char *ifname)
-{
- struct ifreq ifr;
- int res = 0;
-
- strncpy(ifr.ifr_name, ifname, IFNAMSIZ);
- ifr.ifr_addr.sa_family = AF_INET;
- memset(ifr.ifr_addr.sa_data, 0, sizeof(ifr.ifr_addr.sa_data));
-
- res = ioctl(skfd, SIOCSIFADDR, &ifr);
- if (res < 0) {
- saved_errno = errno;
- v_print("Interface '%s': Error: SIOCSIFADDR failed: %s\n",
- ifname, strerror(saved_errno));
- } else {
- v_print("Interface '%s': address cleared\n", ifname);
- }
-
- return res;
-}
-
-static int set_if_addr(char *master_ifname, char *slave_ifname)
-{
- struct ifreq ifr;
- int res;
- unsigned char *ipaddr;
- int i;
- struct {
- char *req_name;
- char *desc;
- int g_ioctl;
- int s_ioctl;
- } ifra[] = {
- {"IFADDR", "addr", SIOCGIFADDR, SIOCSIFADDR},
- {"DSTADDR", "destination addr", SIOCGIFDSTADDR, SIOCSIFDSTADDR},
- {"BRDADDR", "broadcast addr", SIOCGIFBRDADDR, SIOCSIFBRDADDR},
- {"NETMASK", "netmask", SIOCGIFNETMASK, SIOCSIFNETMASK},
- {NULL, NULL, 0, 0},
- };
-
- for (i = 0; ifra[i].req_name; i++) {
- strncpy(ifr.ifr_name, master_ifname, IFNAMSIZ);
- res = ioctl(skfd, ifra[i].g_ioctl, &ifr);
- if (res < 0) {
- int saved_errno = errno;
-
- v_print("Interface '%s': Error: SIOCG%s failed: %s\n",
- master_ifname, ifra[i].req_name,
- strerror(saved_errno));
-
- ifr.ifr_addr.sa_family = AF_INET;
- memset(ifr.ifr_addr.sa_data, 0,
- sizeof(ifr.ifr_addr.sa_data));
- }
-
- strncpy(ifr.ifr_name, slave_ifname, IFNAMSIZ);
- res = ioctl(skfd, ifra[i].s_ioctl, &ifr);
- if (res < 0) {
- int saved_errno = errno;
-
- v_print("Interface '%s': Error: SIOCS%s failed: %s\n",
- slave_ifname, ifra[i].req_name,
- strerror(saved_errno));
-
- }
-
- ipaddr = (unsigned char *)ifr.ifr_addr.sa_data;
- v_print("Interface '%s': set IP %s to %d.%d.%d.%d\n",
- slave_ifname, ifra[i].desc,
- ipaddr[0], ipaddr[1], ipaddr[2], ipaddr[3]);
- }
-
- return 0;
-}
-
-/*
- * Local variables:
- * version-control: t
- * kept-new-versions: 5
- * c-indent-level: 4
- * c-basic-offset: 4
- * tab-width: 4
- * compile-command: "gcc -Wall -Wstrict-prototypes -O -I/usr/src/linux/include ifenslave.c -o ifenslave"
- * End:
- */
-
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists