netdev - Re: [PATCH v4 net-next repost 2/2] sh_eth: Add support for r8a7790 SoC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Tue, 30 Jul 2013 01:32:33 +0200
From:	Laurent Pinchart <laurent.pinchart@...asonboard.com>
To:	Simon Horman <horms+renesas@...ge.net.au>
Cc:	netdev@...r.kernel.org, linux-sh@...r.kernel.org,
	Magnus Damm <magnus.damm@...il.com>,
	Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
Subject: Re: [PATCH v4 net-next repost 2/2] sh_eth: Add support for r8a7790 SoC

Hi Simon,

On Tuesday 23 July 2013 10:18:05 Simon Horman wrote:
> This is a copy of support for r8a7778/9 with the .rmiimode mode bit
> of struct sh_eth_cpu_data set.
> 
> Also update R8A7779 to R8A777x.
> 
> Signed-off-by: Simon Horman <horms+renesas@...ge.net.au>
> 
> ---
> 
> v4
> * s/R8A7779/R8A777x/ as requested by Sergei Shtylyov.
> 
> v3
> * Add r8a7790_data rather than updating r8a777x_data.
>   As requested by Sergei Shtylyov.
> 
> v2
> * Split from "sh_eth: add support RMIIMODE register"
> ---
>  drivers/net/ethernet/renesas/Kconfig  |  2 +-
>  drivers/net/ethernet/renesas/sh_eth.c | 21 +++++++++++++++++++++
>  2 files changed, 22 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/renesas/Kconfig
> b/drivers/net/ethernet/renesas/Kconfig index 19a8a04..a30c439 100644
> --- a/drivers/net/ethernet/renesas/Kconfig
> +++ b/drivers/net/ethernet/renesas/Kconfig
> @@ -13,4 +13,4 @@ config SH_ETH
>  	  Renesas SuperH Ethernet device driver.
>  	  This driver supporting CPUs are:
>  		- SH7619, SH7710, SH7712, SH7724, SH7734, SH7763, SH7757,
> -		  R8A7740 and R8A7779.
> +		  R8A7740, R8A777x and R8A7790.
> diff --git a/drivers/net/ethernet/renesas/sh_eth.c
> b/drivers/net/ethernet/renesas/sh_eth.c index 87af49f..fedc0a0 100644
> --- a/drivers/net/ethernet/renesas/sh_eth.c
> +++ b/drivers/net/ethernet/renesas/sh_eth.c
> @@ -393,6 +393,26 @@ static struct sh_eth_cpu_data r8a777x_data = {
>  	.hw_swap	= 1,
>  };
> 
> +/* R8A7790 */
> +static struct sh_eth_cpu_data r8a7790_data = {
> +	.set_duplex	= sh_eth_set_duplex,
> +	.set_rate	= sh_eth_set_rate_r8a777x,
> +
> +	.ecsr_value	= ECSR_PSRTO | ECSR_LCHNG | ECSR_ICD,
> +	.ecsipr_value	= ECSIPR_PSRTOIP | ECSIPR_LCHNGIP | ECSIPR_ICDIP,
> +	.eesipr_value	= 0x01ff009f,
> +
> +	.tx_check	= EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_RTO,
> +	.eesr_err_check	= EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE |
> +			  EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI,

Is there a reason why the EESR_RFE bit isn't set in eesr_err_check (and thus 
ignored in the interrupt handler) but set in eesipr_value ?

If it's just an omission I'll send a patch.

> +
> +	.apr		= 1,
> +	.mpr		= 1,
> +	.tpauser	= 1,
> +	.hw_swap	= 1,
> +	.rmiimode	= 1,
> +};
> +
>  static void sh_eth_set_rate_sh7724(struct net_device *ndev)
>  {
>  	struct sh_eth_private *mdp = netdev_priv(ndev);
> @@ -2753,6 +2773,7 @@ static struct platform_device_id sh_eth_id_table[] = {
> { "sh7763-gether", (kernel_ulong_t)&sh7763_data },
>  	{ "r8a7740-gether", (kernel_ulong_t)&r8a7740_data },
>  	{ "r8a777x-ether", (kernel_ulong_t)&r8a777x_data },
> +	{ "r8a7790-ether", (kernel_ulong_t)&r8a7790_data },
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(platform, sh_eth_id_table);

-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html