[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20130729235952.GD11142@verge.net.au>
Date: Tue, 30 Jul 2013 08:59:52 +0900
From: Simon Horman <horms@...ge.net.au>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: netdev@...r.kernel.org, linux-sh@...r.kernel.org,
Magnus Damm <magnus.damm@...il.com>,
Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
Subject: Re: [PATCH v4 net-next repost 2/2] sh_eth: Add support for r8a7790
SoC
On Tue, Jul 30, 2013 at 01:32:33AM +0200, Laurent Pinchart wrote:
> Hi Simon,
>
> On Tuesday 23 July 2013 10:18:05 Simon Horman wrote:
> > This is a copy of support for r8a7778/9 with the .rmiimode mode bit
> > of struct sh_eth_cpu_data set.
> >
> > Also update R8A7779 to R8A777x.
> >
> > Signed-off-by: Simon Horman <horms+renesas@...ge.net.au>
> >
> > ---
> >
> > v4
> > * s/R8A7779/R8A777x/ as requested by Sergei Shtylyov.
> >
> > v3
> > * Add r8a7790_data rather than updating r8a777x_data.
> > As requested by Sergei Shtylyov.
> >
> > v2
> > * Split from "sh_eth: add support RMIIMODE register"
> > ---
> > drivers/net/ethernet/renesas/Kconfig | 2 +-
> > drivers/net/ethernet/renesas/sh_eth.c | 21 +++++++++++++++++++++
> > 2 files changed, 22 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/net/ethernet/renesas/Kconfig
> > b/drivers/net/ethernet/renesas/Kconfig index 19a8a04..a30c439 100644
> > --- a/drivers/net/ethernet/renesas/Kconfig
> > +++ b/drivers/net/ethernet/renesas/Kconfig
> > @@ -13,4 +13,4 @@ config SH_ETH
> > Renesas SuperH Ethernet device driver.
> > This driver supporting CPUs are:
> > - SH7619, SH7710, SH7712, SH7724, SH7734, SH7763, SH7757,
> > - R8A7740 and R8A7779.
> > + R8A7740, R8A777x and R8A7790.
> > diff --git a/drivers/net/ethernet/renesas/sh_eth.c
> > b/drivers/net/ethernet/renesas/sh_eth.c index 87af49f..fedc0a0 100644
> > --- a/drivers/net/ethernet/renesas/sh_eth.c
> > +++ b/drivers/net/ethernet/renesas/sh_eth.c
> > @@ -393,6 +393,26 @@ static struct sh_eth_cpu_data r8a777x_data = {
> > .hw_swap = 1,
> > };
> >
> > +/* R8A7790 */
> > +static struct sh_eth_cpu_data r8a7790_data = {
> > + .set_duplex = sh_eth_set_duplex,
> > + .set_rate = sh_eth_set_rate_r8a777x,
> > +
> > + .ecsr_value = ECSR_PSRTO | ECSR_LCHNG | ECSR_ICD,
> > + .ecsipr_value = ECSIPR_PSRTOIP | ECSIPR_LCHNGIP | ECSIPR_ICDIP,
> > + .eesipr_value = 0x01ff009f,
> > +
> > + .tx_check = EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_RTO,
> > + .eesr_err_check = EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE |
> > + EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI,
>
> Is there a reason why the EESR_RFE bit isn't set in eesr_err_check (and thus
> ignored in the interrupt handler) but set in eesipr_value ?
>
> If it's just an omission I'll send a patch.
I believe it is just an omission.
> > +
> > + .apr = 1,
> > + .mpr = 1,
> > + .tpauser = 1,
> > + .hw_swap = 1,
> > + .rmiimode = 1,
> > +};
> > +
> > static void sh_eth_set_rate_sh7724(struct net_device *ndev)
> > {
> > struct sh_eth_private *mdp = netdev_priv(ndev);
> > @@ -2753,6 +2773,7 @@ static struct platform_device_id sh_eth_id_table[] = {
> > { "sh7763-gether", (kernel_ulong_t)&sh7763_data },
> > { "r8a7740-gether", (kernel_ulong_t)&r8a7740_data },
> > { "r8a777x-ether", (kernel_ulong_t)&r8a777x_data },
> > + { "r8a7790-ether", (kernel_ulong_t)&r8a7790_data },
> > { }
> > };
> > MODULE_DEVICE_TABLE(platform, sh_eth_id_table);
>
> --
> Regards,
>
> Laurent Pinchart
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists