[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1376894914-11174-1-git-send-email-peppe.cavallaro@st.com>
Date: Mon, 19 Aug 2013 08:48:34 +0200
From: Giuseppe CAVALLARO <peppe.cavallaro@...com>
To: netdev@...r.kernel.org
Cc: Giuseppe Cavallaro <peppe.cavallaro@...com>
Subject: [PATCH (net.git)] net: phy: rtl8211: fix interrupt on status link change
This is to fix a problem in the rtl8211 where the driver
wasn't properly enabled the interrupt on link change status.
it has to enable the ineterrupt on the bit 10 in the register 18
(INER).
Reported-by: Sharma Bhupesh <B45370@...escale.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@...com>
---
drivers/net/phy/realtek.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 8e7af83..138de83 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -23,7 +23,7 @@
#define RTL821x_INER_INIT 0x6400
#define RTL821x_INSR 0x13
-#define RTL8211E_INER_LINK_STAT 0x10
+#define RTL8211E_INER_LINK_STATUS 0x400
MODULE_DESCRIPTION("Realtek PHY driver");
MODULE_AUTHOR("Johnson Leung");
@@ -57,7 +57,7 @@ static int rtl8211e_config_intr(struct phy_device *phydev)
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
err = phy_write(phydev, RTL821x_INER,
- RTL8211E_INER_LINK_STAT);
+ RTL8211E_INER_LINK_STATUS);
else
err = phy_write(phydev, RTL821x_INER, 0);
--
1.7.4.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists