| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20130821203311.GA23527@electric-eye.fr.zoreil.com>
Date: Wed, 21 Aug 2013 22:33:11 +0200
From: Francois Romieu <romieu@...zoreil.com>
To: liujunliang_ljl <liujunliang_ljl@....com>
Cc: gregkh <gregkh@...e.de>, sunhecheng <sunhecheng@....126.com>,
linux-usb <linux-usb@...r.kernel.org>,
netdev <netdev@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>
Subject: Re: Re: [PATCH-SR9700] Merge USB 1.1 Ethernet Adapter SR9700
DeviceDriver into the Linux Kernel
liujunliang_ljl <liujunliang_ljl@....com> :
[...]
> diff --git a/drivers/net/usb/sr9700.c b/drivers/net/usb/sr9700.c
> new file mode 100644
> index 0000000..9c8f167
> --- /dev/null
> +++ b/drivers/net/usb/sr9700.c
[...]
> +static int sr_read(struct usbnet *dev, u8 reg, u16 length, void *data)
> +{
> + int err;
> +
> + err = usbnet_read_cmd(dev, SR_RD_REGS, SR_REQ_RD_REG,
> + 0, reg, data, length);
err = usbnet_read_cmd(dev, SR_RD_REGS, SR_REQ_RD_REG, 0, reg, data,
length);
(I already outlined it in my first review)
> + if ((err != length) && (err >= 0))
> + err = -EINVAL;
> + return err;
> +}
> +
> +static int sr_write(struct usbnet *dev, u8 reg, u16 length, void *data)
> +{
> + int err;
> +
> + err = usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG,
> + 0, reg, data, length);
See my first review as well.
> + if ((err >= 0) && (err < length))
> + err = -EINVAL;
> + return err;
> +}
> +
> +static int sr_read_reg(struct usbnet *dev, u8 reg, u8 *value)
> +{
> + return sr_read(dev, reg, 1, value);
> +}
> +
> +static int sr_write_reg(struct usbnet *dev, u8 reg, u8 value)
> +{
> + return usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG,
> + value, reg, NULL, 0);
See my first review as well.
> +}
> +
> +static void sr_write_async(struct usbnet *dev, u8 reg, u16 length, void *data)
> +{
> + usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG,
> + 0, reg, data, length);
See my first review as well.
> +}
> +
> +static void sr_write_reg_async(struct usbnet *dev, u8 reg, u8 value)
> +{
> + usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG,
> + value, reg, NULL, 0);
See my first review as well.
> +}
> +
> +static int sr_share_read_word(struct usbnet *dev, int phy, u8 reg, __le16 *value)
> +{
> + int ret, i;
> +
> + mutex_lock(&dev->phy_mutex);
> +
> + sr_write_reg(dev, EPAR, phy ? (reg | 0x40) : reg);
> + sr_write_reg(dev, EPCR, phy ? 0xc : 0x4);
> +
> + for (i = 0; i < SR_SHARE_TIMEOUT; i++) {
> + u8 tmp = 0;
> +
> + udelay(1);
> + ret = sr_read_reg(dev, EPCR, &tmp);
> + if (ret < 0)
> + goto out_unlock;
> +
> + /* ready */
> + if ((tmp & EPCR_ERRE) == 0)
> + break;
> + }
> +
> + if (i >= SR_SHARE_TIMEOUT) {
> + netdev_err(dev->net, "%s read timed out!\n", phy ? "phy" : "eeprom");
> + ret = -EIO;
> + goto out_unlock;
> + }
> +
> + sr_write_reg(dev, EPCR, 0x0);
> + ret = sr_read(dev, EPDR, 2, value);
> +
> + netdev_dbg(dev->net, "read shared %d 0x%02x returned 0x%04x, %d\n",
> + phy, reg, *value, ret);
> +
> + out_unlock:
^ please remove space.
(you renamed it but the "no space before label" part has been ignored)
> + mutex_unlock(&dev->phy_mutex);
> + return ret;
> +}
> +
> +static int sr_share_write_word(struct usbnet *dev, int phy, u8 reg, __le16 value)
> +{
> + int ret, i;
> +
> + mutex_lock(&dev->phy_mutex);
> +
> + ret = sr_write(dev, EPDR, 2, &value);
> + if (ret < 0)
> + goto out_unlock;
> +
> + sr_write_reg(dev, EPAR, phy ? (reg | 0x40) : reg);
> + sr_write_reg(dev, EPCR, phy ? 0x1a : 0x12);
> +
> + for (i = 0; i < SR_SHARE_TIMEOUT; i++) {
> + u8 tmp = 0;
> +
> + udelay(1);
> + ret = sr_read_reg(dev, EPCR, &tmp);
> + if (ret < 0)
> + goto out_unlock;
> +
> + /* ready */
> + if ((tmp & EPCR_ERRE) == 0)
> + break;
> + }
I made a remark about the 11 lines above in my first review. May I politely
ask you to read it again ?
[...]
> +static const struct ethtool_ops sr9700_ethtool_ops = {
> + .get_drvinfo = usbnet_get_drvinfo,
> + .get_link = sr9700_get_link,
> + .get_msglevel = usbnet_get_msglevel,
> + .set_msglevel = usbnet_set_msglevel,
> + .get_eeprom_len = sr9700_get_eeprom_len,
> + .get_eeprom = sr9700_get_eeprom,
> + .get_settings = usbnet_get_settings,
> + .set_settings = usbnet_set_settings,
> + .nway_reset = usbnet_nway_reset,
The fields above line up nicely with a 4 spaces tabulation but the
standard kernel one is 8 spaces wide.
[...]
> +static const struct net_device_ops sr9700_netdev_ops = {
> + .ndo_open = usbnet_open,
> + .ndo_stop = usbnet_stop,
> + .ndo_start_xmit = usbnet_start_xmit,
> + .ndo_tx_timeout = usbnet_tx_timeout,
> + .ndo_change_mtu = usbnet_change_mtu,
> + .ndo_validate_addr = eth_validate_addr,
> + .ndo_do_ioctl = sr9700_ioctl,
> + .ndo_set_rx_mode = sr9700_set_multicast,
> + .ndo_set_mac_address = sr9700_set_mac_address,
Same 4 vs 8 spaces tabs problem as above.
[...]
> +static int sr9700_bind(struct usbnet *dev, struct usb_interface *intf)
> +{
> + int ret;
> +
> + ret = usbnet_get_endpoints(dev, intf);
> + if (ret)
> + goto out;
> +
> + dev->net->netdev_ops = &sr9700_netdev_ops;
> + dev->net->ethtool_ops = &sr9700_ethtool_ops;
> + dev->net->hard_header_len += SR_TX_OVERHEAD;
> + dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
> + dev->rx_urb_size = 3072; /* bulkin buffer is preferably not less than 3K */
> +
> + dev->mii.dev = dev->net;
> + dev->mii.mdio_read = sr_mdio_read;
> + dev->mii.mdio_write = sr_mdio_write;
> + dev->mii.phy_id_mask = 0x1f;
> + dev->mii.reg_num_mask = 0x1f;
Please add local dev->net and dev->mii variables.
[...]
> + /* power up and reset phy */
> + sr_write_reg(dev, PRR, 1);
Please replace '1' with appropriate #define.
> + mdelay(20); /* at least 10ms, here 20ms for safe */
> + sr_write_reg(dev, PRR, 0);
Please replace '0' with appropriate #define.
[...]
> +static int sr9700_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
> +{
> + int len;
> + struct sk_buff *sr_skb;
struct sk_buff *sr_skb;
int len;
(long lines first)
[...]
> + /* Each packet contains multiple skbs */
> + while (skb->len > SR_RX_OVERHEAD) {
> + if (skb->data[0] != 0x40)
> + return 0;
> +
> + /* ignore the CRC length */
> + len = (skb->data[1] | (skb->data[2] << 8)) - 4;
> +
> + if (len > ETH_FRAME_LEN)
> + return 0;
> +
> + /* the last skb of current packet */
> + if (skb->len == (len + SR_RX_OVERHEAD)) {
> + skb_pull(skb, 3);
> + skb->len = len;
> + skb->tail = skb->data + len;
> + skb->truesize = len + sizeof(struct sk_buff);
> + return 2;
> + }
> +
> + /* skb_clone is used for address align */
> + sr_skb = skb_clone(skb, GFP_ATOMIC);
> + if (sr_skb) {
if (!sr_skb)
return 0;
> + sr_skb->len = len;
> + sr_skb->data = skb->data + 3;
> + sr_skb->tail = skb->data + len;
> + sr_skb->truesize = len + sizeof(struct sk_buff);
> + usbnet_skb_return(dev, sr_skb);
> + } else {
> + return 0;
> + }
> +
> + skb_pull(skb, len + SR_RX_OVERHEAD);
> + };
> +
> + return 0;
> +}
[...]
> +static struct usb_driver sr9700_usb_driver = {
> + .name = "sr9700",
> + .id_table = products,
> + .probe = usbnet_probe,
> + .disconnect = usbnet_disconnect,
> + .suspend = usbnet_suspend,
> + .resume = usbnet_resume,
> + .disable_hub_initiated_lpm = 1,
> +};
Please line things up (see my first review).
[...]
> ???????? Francois Romieu
> ?????????? 2013-08-21 04:46:12
> ???????? liujunliang_ljl
> ?????? gregkh; sunhecheng; linux-usb; netdev; linux-kernel
> ?????? Re: [PATCH-SR9700] Merge USB 1.1 Ethernet Adapter SR9700 DeviceDriver into the Linux Kernel
Please avoid full quote and top posting.
--
Ueimor
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists