[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Mon, 9 Sep 2013 12:12:47 +0530
From: Mugunthan V N <mugunthanvnm@...com>
To: Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
CC: <netdev@...r.kernel.org>, <zonque@...il.com>,
<davem@...emloft.net>, <bcousson@...libre.com>, <tony@...mide.com>,
<devicetree@...r.kernel.org>, <linux-omap@...r.kernel.org>
Subject: Re: [RFC PATCH 4/4] ARM: dts: am33xx: adopt to cpsw-phy-sel driver
to configure phy mode
On Sunday 08 September 2013 11:34 PM, Sergei Shtylyov wrote:
> Hello.
>
> On 09/08/2013 03:23 PM, Mugunthan V N wrote:
>
>> Add DT entries for the phy mode selection in AM33xx SoC using
>> cpsw-phy-sel
>> driver.
>
>> Signed-off-by: Mugunthan V N <mugunthanvnm@...com>
>> ---
>> arch/arm/boot/dts/am33xx.dtsi | 6 ++++++
>> 1 file changed, 6 insertions(+)
>
>> diff --git a/arch/arm/boot/dts/am33xx.dtsi
>> b/arch/arm/boot/dts/am33xx.dtsi
>> index f9c5da9..4359672 100644
>> --- a/arch/arm/boot/dts/am33xx.dtsi
>> +++ b/arch/arm/boot/dts/am33xx.dtsi
>> @@ -594,6 +594,12 @@
>> /* Filled in by U-Boot */
>> mac-address = [ 00 00 00 00 00 00 ];
>> };
>> +
>> + phy_sel: cpsw_phy_sel@...10650 {
>
> Dashes are preferred to uderscores in the device tree names.
I tried with dashes but i get the below error.
$ make CROSS_COMPILE=arm-linux-gnueabihf- ARCH=arm dtbs
DTC arch/arm/boot/dts/am335x-evm.dtb
Error: arch/arm/boot/dts/am33xx.dtsi:598.11-12 syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [arch/arm/boot/dts/am335x-evm.dtb] Error 1
make: *** [dtbs] Error 2
Regards
Mugunthan V N
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists