| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1378865937-12055-1-git-send-email-B38611@freescale.com>
Date: Wed, 11 Sep 2013 10:18:57 +0800
From: Fugang Duan <B38611@...escale.com>
To: <shawn.guo@...aro.org>, <davem@...emloft.net>
CC: <netdev@...r.kernel.org>, <bhutchings@...arflare.com>,
<stephen@...workplumber.org>, <b20596@...escale.com>,
<s.hauer@...gutronix.de>, <b38611@...escale.com>
Subject: [PATCH v2 1/1] net: fec: fix phy reset operation to let imx6sl evk work
The patch do correct phy reset operation to let imx6sl evk
ethernet work.
Current driver only do phy reset in probe function, which is
not right. Since some phy clock is disabled after module probe,
the phy enter abnormal status, which needs do reset to recovery
the phy. And do ifconfig ethx up/down test, the phy also enter
abnormal status.
The log as:
libphy: 2188000.ethernet:04 - Link is Up - 10/Full
libphy: 2188000.ethernet:04 - Link is Up - 100/Full
libphy: 2188000.ethernet:04 - Link is Down
libphy: 2188000.ethernet:04 - Link is Up - 10/Half
libphy: 2188000.ethernet:04 - Link is Up - 10/Full
libphy: 2188000.ethernet:04 - Link is Up - 100/Full
...
So, do phy reset if ethx up/down or clock enable/disable.
Changes from V1:
- remove some unecessary comments.
- move the function "fec_enet_reset_phy()" up and remove
the prototype for the function.
Signed-off-by: Fugang Duan <B38611@...escale.com>
Reviewed-by: Shawn Guo <R65073@...escale.com>
CC: Shawn Guo <shawn.guo@...aro.org>
CC: Li Frank <B20596@...escale.com>
CC: "David S. Miller" <davem@...emloft.net>
CC: Sascha Hauer <s.hauer@...gutronix.de>
---
drivers/net/ethernet/freescale/fec.h | 3 +
drivers/net/ethernet/freescale/fec_main.c | 60 +++++++++++++++++------------
2 files changed, 38 insertions(+), 25 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h
index 0120217..473d5fb 100644
--- a/drivers/net/ethernet/freescale/fec.h
+++ b/drivers/net/ethernet/freescale/fec.h
@@ -321,6 +321,9 @@ struct fec_enet_private {
struct napi_struct napi;
int csum_flags;
+ int phy_reset_gpio;
+ int reset_duration;
+
struct ptp_clock *ptp_clock;
struct ptp_clock_info ptp_caps;
unsigned long last_overflow_check;
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index f9aacf5..153dcbf 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -238,6 +238,18 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address");
static int mii_cnt;
+static void fec_enet_reset_phy(struct platform_device *pdev)
+{
+ struct net_device *ndev = platform_get_drvdata(pdev);
+ struct fec_enet_private *fep = netdev_priv(ndev);
+
+ if (gpio_is_valid(fep->phy_reset_gpio)) {
+ gpio_set_value(fep->phy_reset_gpio, 0);
+ msleep(fep->reset_duration);
+ gpio_set_value(fep->phy_reset_gpio, 1);
+ }
+}
+
static inline
struct bufdesc *fec_enet_get_nextdesc(struct bufdesc *bdp, struct fec_enet_private *fep)
{
@@ -1780,6 +1792,9 @@ fec_enet_open(struct net_device *ndev)
phy_start(fep->phy_dev);
netif_start_queue(ndev);
fep->opened = 1;
+
+ fec_enet_reset_phy(fep->pdev);
+
return 0;
}
@@ -2029,43 +2044,39 @@ static int fec_enet_init(struct net_device *ndev)
return 0;
}
-#ifdef CONFIG_OF
-static void fec_reset_phy(struct platform_device *pdev)
+static void fec_enet_of_init(struct platform_device *pdev)
{
- int err, phy_reset;
- int msec = 1;
struct device_node *np = pdev->dev.of_node;
+ struct net_device *ndev = platform_get_drvdata(pdev);
+ struct fec_enet_private *fep = netdev_priv(ndev);
+ int err;
+
+ /*
+ * init phy-reset-gpio to one invalid GPIO for no phy
+ * gpio reset platform
+ */
+ fep->phy_reset_gpio = -1;
if (!np)
return;
- of_property_read_u32(np, "phy-reset-duration", &msec);
+ of_property_read_u32(np, "phy-reset-duration",
+ &fep->reset_duration);
/* A sane reset duration should not be longer than 1s */
- if (msec > 1000)
- msec = 1;
+ if ((fep->reset_duration > 1000) || (fep->reset_duration == 0))
+ fep->reset_duration = 1;
- phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0);
- if (!gpio_is_valid(phy_reset))
+ fep->phy_reset_gpio = of_get_named_gpio(np, "phy-reset-gpios", 0);
+ if (!gpio_is_valid(fep->phy_reset_gpio))
return;
- err = devm_gpio_request_one(&pdev->dev, phy_reset,
- GPIOF_OUT_INIT_LOW, "phy-reset");
+ err = devm_gpio_request_one(&pdev->dev, fep->phy_reset_gpio,
+ GPIOF_OUT_INIT_HIGH, "phy-reset");
if (err) {
dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n", err);
- return;
+ fep->phy_reset_gpio = -1;
}
- msleep(msec);
- gpio_set_value(phy_reset, 1);
}
-#else /* CONFIG_OF */
-static void fec_reset_phy(struct platform_device *pdev)
-{
- /*
- * In case of platform probe, the reset has been done
- * by machine code.
- */
-}
-#endif /* CONFIG_OF */
static int
fec_probe(struct platform_device *pdev)
@@ -2113,6 +2124,7 @@ fec_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, ndev);
+ fec_enet_of_init(pdev);
ret = of_get_phy_mode(pdev->dev.of_node);
if (ret < 0) {
pdata = dev_get_platdata(&pdev->dev);
@@ -2181,8 +2193,6 @@ fec_probe(struct platform_device *pdev)
fep->reg_phy = NULL;
}
- fec_reset_phy(pdev);
-
if (fep->bufdesc_ex)
fec_ptp_init(pdev);
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists