netdev - [PATCH net-next 08/10] ieee802154: ensure that first RF212 state comes from TRX

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1392223034-19955-9-git-send-email-phoebe.buckheister@itwm.fraunhofer.de>
Date:	Wed, 12 Feb 2014 17:37:12 +0100
From:	Phoebe Buckheister <phoebe.buckheister@...m.fraunhofer.de>
To:	netdev@...r.kernel.org
Cc:	linux-zigbee-devel@...ts.sourceforge.net, davem@...emloft.net,
	Phoebe Buckheister <phoebe.buckheister@...m.fraunhofer.de>
Subject: [PATCH net-next 08/10] ieee802154: ensure that first RF212 state comes from TRX_OFF

A documented erratum of the RF212 chip describes that some versions of
RF212 may not be properly reset by the standard reset procedure. The
described workaround seems to not fully work either; my RF212 chips will
not correctly receive any frames unless they are taken from RX mode to
TRX_OFF and back to RX mode, effectively forcing a up-down-up-cycle.
Going to TRX_OFF and to RX without intermediate state changes at least
once fixes this.

The same transition is allowed for RF230, so simply do it all the time.

Signed-off-by: Phoebe Buckheister <phoebe.buckheister@...m.fraunhofer.de>
---
 drivers/net/ieee802154/at86rf230.c |   25 +++----------------------
 1 file changed, 3 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 9e3bb34..77b8111 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -930,18 +930,9 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
 	if (rc)
 		return rc;
 
-	dev_info(&lp->spi->dev, "Status: %02x\n", status);
-	if (status == STATE_P_ON) {
-		rc = at86rf230_write_subreg(lp, SR_TRX_CMD,
-			STATE_FORCE_TRX_OFF);
-		if (rc)
-			return rc;
-		msleep(1);
-		rc = at86rf230_read_subreg(lp, SR_TRX_STATUS, &status);
-		if (rc)
-			return rc;
-		dev_info(&lp->spi->dev, "Status: %02x\n", status);
-	}
+	rc = at86rf230_write_subreg(lp, SR_TRX_CMD, STATE_FORCE_TRX_OFF);
+	if (rc)
+		return rc;
 
 	/* configure irq polarity, defaults to high active */
 	if (pdata->irq_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW))
@@ -969,16 +960,6 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
 	/* Wait the next SLEEP cycle */
 	msleep(100);
 
-	rc = at86rf230_write_subreg(lp, SR_TRX_CMD, STATE_TX_ON);
-	if (rc)
-		return rc;
-	msleep(1);
-
-	rc = at86rf230_read_subreg(lp, SR_TRX_STATUS, &status);
-	if (rc)
-		return rc;
-	dev_info(&lp->spi->dev, "Status: %02x\n", status);
-
 	rc = at86rf230_read_subreg(lp, SR_DVDD_OK, &status);
 	if (rc)
 		return rc;
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html