| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1392223034-19955-7-git-send-email-phoebe.buckheister@itwm.fraunhofer.de>
Date: Wed, 12 Feb 2014 17:37:10 +0100
From: Phoebe Buckheister <phoebe.buckheister@...m.fraunhofer.de>
To: netdev@...r.kernel.org
Cc: linux-zigbee-devel@...ts.sourceforge.net, davem@...emloft.net,
Phoebe Buckheister <phoebe.buckheister@...m.fraunhofer.de>
Subject: [PATCH net-next 06/10] ieee802154: add support for CCA mode in wpan phys
The standard describes four modes of clear channel assesment: "energy
above threshold", "carrier found", and the logical and/or of these two.
Support for CCA mode setting is included in the at86rf230 driver,
predicated for RF212 chips.
Signed-off-by: Phoebe Buckheister <phoebe.buckheister@...m.fraunhofer.de>
---
drivers/net/ieee802154/at86rf230.c | 9 +++++++++
include/linux/nl802154.h | 1 +
include/net/mac802154.h | 5 +++++
include/net/wpan-phy.h | 1 +
net/ieee802154/nl-phy.c | 32 +++++++++++++++++++++++++++++---
net/ieee802154/nl_policy.c | 1 +
net/mac802154/ieee802154_dev.c | 11 +++++++++++
7 files changed, 57 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index a785efd..fb5e55a 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -798,6 +798,14 @@ at86rf212_set_lbt(struct ieee802154_dev *dev, bool on)
return at86rf230_write_subreg(lp, SR_CSMA_LBT_MODE, on);
}
+static int
+at86rf212_set_cca_mode(struct ieee802154_dev *dev, u8 mode)
+{
+ struct at86rf230_local *lp = dev->priv;
+
+ return at86rf230_write_subreg(lp, SR_CCA_MODE, mode);
+}
+
static struct ieee802154_ops at86rf230_ops = {
.owner = THIS_MODULE,
.xmit = at86rf230_xmit,
@@ -818,6 +826,7 @@ static struct ieee802154_ops at86rf212_ops = {
.set_hw_addr_filt = at86rf230_set_hw_addr_filt,
.set_txpower = at86rf212_set_txpower,
.set_lbt = at86rf212_set_lbt,
+ .set_cca_mode = at86rf212_set_cca_mode,
};
static void at86rf230_irqwork(struct work_struct *work)
diff --git a/include/linux/nl802154.h b/include/linux/nl802154.h
index 326baee..5edefc1 100644
--- a/include/linux/nl802154.h
+++ b/include/linux/nl802154.h
@@ -72,6 +72,7 @@ enum {
IEEE802154_ATTR_TXPOWER,
IEEE802154_ATTR_LBT_ENABLED,
+ IEEE802154_ATTR_CCA_MODE,
__IEEE802154_ATTR_MAX,
};
diff --git a/include/net/mac802154.h b/include/net/mac802154.h
index 521edcb..1a98e50 100644
--- a/include/net/mac802154.h
+++ b/include/net/mac802154.h
@@ -122,6 +122,10 @@ struct ieee802154_dev {
* Enables or disables listen before talk on the device. Called with
* pib_lock held.
* Returns either zero, or negative errno.
+ *
+ * set_cca_mode
+ * Sets the CCA mode used by the device. Called with pib_lock held.
+ * Returns either zero, or negative errno.
*/
struct ieee802154_ops {
struct module *owner;
@@ -140,6 +144,7 @@ struct ieee802154_ops {
u8 addr[IEEE802154_ADDR_LEN]);
int (*set_txpower)(struct ieee802154_dev *dev, int db);
int (*set_lbt)(struct ieee802154_dev *dev, bool on);
+ int (*set_cca_mode)(struct ieee802154_dev *dev, u8 mode);
};
/* Basic interface to register ieee802154 device */
diff --git a/include/net/wpan-phy.h b/include/net/wpan-phy.h
index 804e6c4..03b5905 100644
--- a/include/net/wpan-phy.h
+++ b/include/net/wpan-phy.h
@@ -58,6 +58,7 @@ struct wpan_phy {
int (*set_txpower)(struct wpan_phy *phy, int db);
int (*set_lbt)(struct wpan_phy *phy, bool on);
+ int (*set_cca_mode)(struct wpan_phy *phy, u8 cca_mode);
char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
};
diff --git a/net/ieee802154/nl-phy.c b/net/ieee802154/nl-phy.c
index f248122..026b21a 100644
--- a/net/ieee802154/nl-phy.c
+++ b/net/ieee802154/nl-phy.c
@@ -57,7 +57,8 @@ static int ieee802154_nl_fill_phy(struct sk_buff *msg, u32 portid,
nla_put_u8(msg, IEEE802154_ATTR_PAGE, phy->current_page) ||
nla_put_u8(msg, IEEE802154_ATTR_CHANNEL, phy->current_channel) ||
nla_put_s8(msg, IEEE802154_ATTR_TXPOWER, phy->transmit_power) ||
- nla_put_u8(msg, IEEE802154_ATTR_LBT_ENABLED, phy->lbt))
+ nla_put_u8(msg, IEEE802154_ATTR_LBT_ENABLED, phy->lbt) ||
+ nla_put_u8(msg, IEEE802154_ATTR_CCA_MODE, phy->cca_mode))
goto nla_put_failure;
for (i = 0; i < 32; i++) {
if (phy->channels_supported[i])
@@ -385,6 +386,23 @@ static int phy_set_lbt(struct wpan_phy *phy, struct genl_info *info)
return 0;
}
+static int phy_set_cca_mode(struct wpan_phy *phy, struct genl_info *info)
+{
+ u8 mode = nla_get_u8(info->attrs[IEEE802154_ATTR_CCA_MODE]);
+ int rc;
+
+ if (mode > 3)
+ return -EINVAL;
+
+ rc = phy->set_cca_mode(phy, mode);
+ if (rc < 0)
+ return rc;
+
+ phy->cca_mode = mode;
+
+ return 0;
+}
+
int ieee802154_set_phyparams(struct sk_buff *skb, struct genl_info *info)
{
struct wpan_phy *phy;
@@ -394,7 +412,8 @@ int ieee802154_set_phyparams(struct sk_buff *skb, struct genl_info *info)
pr_debug("%s\n", __func__);
if (!info->attrs[IEEE802154_ATTR_PHY_NAME] &&
- !info->attrs[IEEE802154_ATTR_LBT_ENABLED])
+ !info->attrs[IEEE802154_ATTR_LBT_ENABLED] &&
+ !info->attrs[IEEE802154_ATTR_CCA_MODE])
return -EINVAL;
name = nla_data(info->attrs[IEEE802154_ATTR_PHY_NAME]);
@@ -406,7 +425,8 @@ int ieee802154_set_phyparams(struct sk_buff *skb, struct genl_info *info)
return -ENODEV;
if ((!phy->set_txpower && info->attrs[IEEE802154_ATTR_TXPOWER]) ||
- (!phy->set_lbt && info->attrs[IEEE802154_ATTR_LBT_ENABLED]))
+ (!phy->set_lbt && info->attrs[IEEE802154_ATTR_LBT_ENABLED]) ||
+ (!phy->set_cca_mode && info->attrs[IEEE802154_ATTR_CCA_MODE]))
goto out;
mutex_lock(&phy->pib_lock);
@@ -423,6 +443,12 @@ int ieee802154_set_phyparams(struct sk_buff *skb, struct genl_info *info)
goto error;
}
+ if (info->attrs[IEEE802154_ATTR_CCA_MODE]) {
+ rc = phy_set_cca_mode(phy, info);
+ if (rc < 0)
+ goto error;
+ }
+
mutex_unlock(&phy->pib_lock);
wpan_phy_put(phy);
diff --git a/net/ieee802154/nl_policy.c b/net/ieee802154/nl_policy.c
index a09f642..d87c2c9 100644
--- a/net/ieee802154/nl_policy.c
+++ b/net/ieee802154/nl_policy.c
@@ -55,5 +55,6 @@ const struct nla_policy ieee802154_policy[IEEE802154_ATTR_MAX + 1] = {
[IEEE802154_ATTR_TXPOWER] = { .type = NLA_S8, },
[IEEE802154_ATTR_LBT_ENABLED] = { .type = NLA_U8, },
+ [IEEE802154_ATTR_CCA_MODE] = { .type = NLA_U8, },
};
diff --git a/net/mac802154/ieee802154_dev.c b/net/mac802154/ieee802154_dev.c
index 56338c8..4965e4c 100644
--- a/net/mac802154/ieee802154_dev.c
+++ b/net/mac802154/ieee802154_dev.c
@@ -185,6 +185,16 @@ static int mac802154_set_lbt(struct wpan_phy *phy, bool on)
return priv->ops->set_lbt(&priv->hw, on);
}
+static int mac802154_set_cca_mode(struct wpan_phy *phy, u8 mode)
+{
+ struct mac802154_priv *priv = wpan_phy_priv(phy);
+
+ if (!priv->ops->set_cca_mode)
+ return -ENOTSUPP;
+
+ return priv->ops->set_cca_mode(&priv->hw, mode);
+}
+
struct ieee802154_dev *
ieee802154_alloc_device(size_t priv_data_len, struct ieee802154_ops *ops)
{
@@ -264,6 +274,7 @@ int ieee802154_register_device(struct ieee802154_dev *dev)
priv->phy->del_iface = mac802154_del_iface;
priv->phy->set_txpower = mac802154_set_txpower;
priv->phy->set_lbt = mac802154_set_lbt;
+ priv->phy->set_cca_mode = mac802154_set_cca_mode;
rc = wpan_phy_register(priv->phy);
if (rc < 0)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists