| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1396333381-7252-1-git-send-email-mike.rapoport@ravellosystems.com>
Date: Tue, 1 Apr 2014 09:23:01 +0300
From: Mike Rapoport <mike.rapoport@...ellosystems.com>
To: David Miller <davem@...emloft.net>
Cc: David Stevens <dlstevens@...ibm.com>,
Cong Wang <cwang@...pensource.com>,
netdev <netdev@...r.kernel.org>, stable@...r.kernel.org,
Mike Rapoport <mike.rapoport@...ellosystems.com>
Subject: [PATCH net] net: vxlan: fix crash when interface is created with no group
If the vxlan interface is created without explicit group definition,
there are corner cases which may cause kernel panic.
For instance, in the following scenario:
node A:
$ ip link add dev vxlan42 address 2c:c2:60:00:10:20 type vxlan id 42
$ ip addr add dev vxlan42 10.0.0.1/24
$ ip link set up dev vxlan42
$ arp -i vxlan42 -s 10.0.0.2 2c:c2:60:00:01:02
$ bridge fdb add dev vxlan42 to 2c:c2:60:00:01:02 dst <IPv4 address>
$ ping 10.0.0.2
node B:
$ ip link add dev vxlan42 address 2c:c2:60:00:01:02 type vxlan id 42
$ ip addr add dev vxlan42 10.0.0.2/24
$ ip link set up dev vxlan42
$ arp -i vxlan42 -s 10.0.0.1 2c:c2:60:00:10:20
node B crashes:
vxlan42: 2c:c2:60:00:10:20 migrated from 4011:eca4:c0a8:6466:c0a8:6415:8e09:2118 to (invalid address)
vxlan42: 2c:c2:60:00:10:20 migrated from 4011:eca4:c0a8:6466:c0a8:6415:8e09:2118 to (invalid address)
BUG: unable to handle kernel NULL pointer dereference at 0000000000000046
IP: [<ffffffff8143c459>] ip6_route_output+0x58/0x82
PGD 7bd89067 PUD 7bd4e067 PMD 0
Oops: 0000 [#1] SMP
Modules linked in:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.14.0-rc8-hvx-xen-00019-g97a5221-dirty #154
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
task: ffff88007c774f50 ti: ffff88007c79c000 task.ti: ffff88007c79c000
RIP: 0010:[<ffffffff8143c459>] [<ffffffff8143c459>] ip6_route_output+0x58/0x82
RSP: 0018:ffff88007fd03668 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffffff8186a000 RCX: 0000000000000040
RDX: 0000000000000000 RSI: ffff88007b0e4a80 RDI: ffff88007fd03754
RBP: ffff88007fd03688 R08: ffff88007b0e4a80 R09: 0000000000000000
R10: 0200000a0100000a R11: 0001002200000000 R12: ffff88007fd03740
R13: ffff88007b0e4a80 R14: ffff88007b0e4a80 R15: ffff88007bba0c50
FS: 0000000000000000(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000046 CR3: 000000007bb60000 CR4: 00000000000006e0
Stack:
0000000000000000 ffff88007fd037a0 ffffffff8186a000 ffff88007fd03740
ffff88007fd036c8 ffffffff814320bb 0000000000006e49 ffff88007b8b7360
ffff88007bdbf200 ffff88007bcbc000 ffff88007b8b7000 ffff88007b8b7360
Call Trace:
<IRQ>
[<ffffffff814320bb>] ip6_dst_lookup_tail+0x2d/0xa4
[<ffffffff814322a5>] ip6_dst_lookup+0x10/0x12
[<ffffffff81323b4e>] vxlan_xmit_one+0x32a/0x68c
[<ffffffff814a325a>] ? _raw_spin_unlock_irqrestore+0x12/0x14
[<ffffffff8104c551>] ? lock_timer_base.isra.23+0x26/0x4b
[<ffffffff8132451a>] vxlan_xmit+0x66a/0x6a8
[<ffffffff8141a365>] ? ipt_do_table+0x35f/0x37e
[<ffffffff81204ba2>] ? selinux_ip_postroute+0x41/0x26e
[<ffffffff8139d0c1>] dev_hard_start_xmit+0x2ce/0x3ce
[<ffffffff8139d491>] __dev_queue_xmit+0x2d0/0x392
[<ffffffff813b380f>] ? eth_header+0x28/0xb5
[<ffffffff8139d569>] dev_queue_xmit+0xb/0xd
[<ffffffff813a5aa6>] neigh_resolve_output+0x134/0x152
[<ffffffff813db741>] ip_finish_output2+0x236/0x299
[<ffffffff813dc074>] ip_finish_output+0x98/0x9d
[<ffffffff813dc749>] ip_output+0x62/0x67
[<ffffffff813da9f2>] dst_output+0xf/0x11
[<ffffffff813dc11c>] ip_local_out+0x1b/0x1f
[<ffffffff813dcf1b>] ip_send_skb+0x11/0x37
[<ffffffff813dcf70>] ip_push_pending_frames+0x2f/0x33
[<ffffffff813ff732>] icmp_push_reply+0x106/0x115
[<ffffffff813ff9e4>] icmp_reply+0x142/0x164
[<ffffffff813ffb3b>] icmp_echo.part.16+0x46/0x48
[<ffffffff813c1d30>] ? nf_iterate+0x43/0x80
[<ffffffff813d8037>] ? xfrm4_policy_check.constprop.11+0x52/0x52
[<ffffffff813ffb62>] icmp_echo+0x25/0x27
[<ffffffff814005f7>] icmp_rcv+0x1d2/0x20a
[<ffffffff813d8037>] ? xfrm4_policy_check.constprop.11+0x52/0x52
[<ffffffff813d810d>] ip_local_deliver_finish+0xd6/0x14f
[<ffffffff813d8037>] ? xfrm4_policy_check.constprop.11+0x52/0x52
[<ffffffff813d7fde>] NF_HOOK.constprop.10+0x4c/0x53
[<ffffffff813d82bf>] ip_local_deliver+0x4a/0x4f
[<ffffffff813d7f7b>] ip_rcv_finish+0x253/0x26a
[<ffffffff813d7d28>] ? inet_add_protocol+0x3e/0x3e
[<ffffffff813d7fde>] NF_HOOK.constprop.10+0x4c/0x53
[<ffffffff813d856a>] ip_rcv+0x2a6/0x2ec
[<ffffffff8139a9a0>] __netif_receive_skb_core+0x43e/0x478
[<ffffffff812a346f>] ? virtqueue_poll+0x16/0x27
[<ffffffff8139aa2f>] __netif_receive_skb+0x55/0x5a
[<ffffffff8139aaaa>] process_backlog+0x76/0x12f
[<ffffffff8139add8>] net_rx_action+0xa2/0x1ab
[<ffffffff81047847>] __do_softirq+0xca/0x1d1
[<ffffffff81047ace>] irq_exit+0x3e/0x85
[<ffffffff8100b98b>] do_IRQ+0xa9/0xc4
[<ffffffff814a37ad>] common_interrupt+0x6d/0x6d
<EOI>
[<ffffffff810378db>] ? native_safe_halt+0x6/0x8
[<ffffffff810110c7>] default_idle+0x9/0xd
[<ffffffff81011694>] arch_cpu_idle+0x13/0x1c
[<ffffffff8107480d>] cpu_startup_entry+0xbc/0x137
[<ffffffff8102e741>] start_secondary+0x1a0/0x1a5
Code: 24 14 e8 f1 e5 01 00 31 d2 a8 32 0f 95 c2 49 8b 44 24 2c 49 0b 44 24 24 74 05 83 ca 04 eb 1c 4d 85 ed 74 17 49 8b 85 a8 02 00 00 <66> 8b 40 46 66 c1 e8 07 83 e0 07 c1 e0 03 09 c2 4c 89 e6 48 89
RIP [<ffffffff8143c459>] ip6_route_output+0x58/0x82
RSP <ffff88007fd03668>
CR2: 0000000000000046
---[ end trace 4612329caab37efd ]---
When vxlan interface is created without explicit group definition, the
default_dst protocol family is initialiazed to AF_UNSPEC and the driver
assumes IPv4 configuration. On the other side, the default_dst protocol
family is used to differentiate between IPv4 and IPv6 cases and, since,
AF_UNSPEC != AF_INET, the processing takes the IPv6 path.
Making the IPv4 assumption explicit by settting default_dst protocol
family to AF_INET4 and preventing mixing of IPv4 and IPv6 addresses in
snooped fdb entries fixes the corner case crashes.
Signed-off-by: Mike Rapoport <mike.rapoport@...ellosystems.com>
---
This can happen starting from 3.12 when IPv6 support was merged to vxlan.
drivers/net/vxlan.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 1236812..d091e52 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -871,6 +871,9 @@ static int vxlan_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
if (err)
return err;
+ if (vxlan->default_dst.remote_ip.sa.sa_family != ip.sa.sa_family)
+ return -EAFNOSUPPORT;
+
spin_lock_bh(&vxlan->hash_lock);
err = vxlan_fdb_create(vxlan, addr, &ip, ndm->ndm_state, flags,
port, vni, ifindex, ndm->ndm_flags);
@@ -2612,9 +2615,10 @@ static int vxlan_newlink(struct net *net, struct net_device *dev,
vni = nla_get_u32(data[IFLA_VXLAN_ID]);
dst->remote_vni = vni;
+ /* Unless IPv6 is explicitly requested, assume IPv4 */
+ dst->remote_ip.sa.sa_family = AF_INET;
if (data[IFLA_VXLAN_GROUP]) {
dst->remote_ip.sin.sin_addr.s_addr = nla_get_be32(data[IFLA_VXLAN_GROUP]);
- dst->remote_ip.sa.sa_family = AF_INET;
} else if (data[IFLA_VXLAN_GROUP6]) {
if (!IS_ENABLED(CONFIG_IPV6))
return -EPFNOSUPPORT;
--
1.8.1.5
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists