netdev - Re: TCP checksum problem

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <534D1B8A.1090301@freescale.com>
Date:	Tue, 15 Apr 2014 19:44:10 +0800
From:	Jianhua Xie <jianhua.xie@...escale.com>
To:	Arvid Brodin <arvid.brodin@...en.se>,
	Eric Dumazet <eric.dumazet@...il.com>
CC:	"netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: Re: TCP checksum problem

On 4/15/2014 12:34 AM, Arvid Brodin wrote:
> On 2014-04-12 02:49, Eric Dumazet wrote:
>> On Sat, 2014-04-12 at 02:25 +0200, Arvid Brodin wrote:
>>> Hi,
>>>
>>> I'm trying to insert a 6-byte HSR header into a newly copied skb,
>>> between the ethernet header and the IP header. The skb comes from my
>>> virtual device's ndo_start_xmit() function and is to be sent on to a
>>> physical interface after modification. Essentially, this is what I'm
>>> doing:
>>>
>>> 	skb = skb_copy_expand(skb, skb_headroom(skb) + HSR_HLEN, 0,
>>> GFP_ATOMIC);
>>>
>>> 	/* Move ethernet header to make room for the HSR header */
>>> 	src = skb_mac_header(skb);
>>> 	WARN_ON_ONCE(src != skb->data);
>>> 	dst = skb_push(skb, HSR_HLEN);
>>> 	memmove(dst, src, ETH_HLEN);
>>> 	skb_reset_mac_header(skb);
>>>
>>> 	/* Fill in the 6-byte header */
>>> 	hsr_fill_tag(skb, frame, port);
>>>
>>> 	/* Point the skb to the physical interface */
>>> 	skb->dev = port->dev;
>>>
>>> 	dev_queue_xmit(skb);
>>>
>>> But something goes wrong with the TCP checksum on the way out. Arp,
>>> ping etc works fine, but anything using TCP is discarded by the
>>> receiver due to incorrect TCP checksums.
>>>
>>> Using wireshark and some printks, I've managed to decide that the
>>> updated TCP checksum is written offset by -6 bytes from where it
>>> should be (into what wireshark calls the TCP header "acknowledgement
>>> number" field).
>>>
>>> Any idea why this happens? I've spent a few days on this now and I'm
>>> running out of ideas...
>>>
>>> This is run on the cadence/macb ethernet device. Before the call to
>>> skb_copy_expand(), skb->ip_summed is CHECKSUM_PARTIAL, skb->csum_start
>>> is 120, and skb->csum_offset is 16. The total frame length is 80 bytes
>>> (on the wire as reported by wireshark - I think this is excluding the
>>> FCS).
>>>
>>>
>> You need to set skb->csum_start to the new offset.
>>
>> ( skb_transport_header(skb) - skb->head )
>>
>> Check how __tcp_v4_send_check() sets csum_start & csum_offset
>>
>> (csum_offset you can leave it as is)
>>
> I recompiled my code today and ran it again, and it worked. I have no
> idea what change I made, althought I know I first used
>
> skb = __pskb_copy(skb, skb_headroom(skb) + HSR_HLEN, GFP_ATOMIC);
>
> instead of
>
> skb = skb_copy_expand(skb, skb_headroom(skb) + HSR_HLEN, 0, GFP_ATOMIC);
>
> for the allocation of the new skb. The latter adjusts csum_start, the
> former doesn't. I may have changed to the latter and simultaneously
> added a manual adjustment to csum_start, because I know I was surprised
> that the checksum moved 2*HSR_HLEN bytes when I did the adjustment. :)
>
> Anyway, it seems to work now. Thanks for the help!
>
>
in your old codes, there called:

dst = skb_push(skb, HSR_HLEN);
this line changed skb->data -= HSR_HLEN;
the skb->csum_start might be from skb->data, you might add 1 line:
skb->csum_start += HSR_HLEN;

I am not very sure, you can have a try. I would be glad if it can help you.

Best Regards,
Jianhua
  


--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html