netdev - [RFC 4/9] net: cdc_ncm: support rx_max/tx

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1399065116-19946-5-git-send-email-bjorn@mork.no>
Date:	Fri,  2 May 2014 23:11:51 +0200
From:	Bjørn Mork <bjorn@...k.no>
To:	netdev@...r.kernel.org
Cc:	linux-usb@...r.kernel.org,
	Alexey Orishko <alexey.orishko@...il.com>,
	Oliver Neukum <oliver@...kum.org>,
	Bjørn Mork <bjorn@...k.no>
Subject: [RFC 4/9] net: cdc_ncm: support rx_max/tx_max updates when running

Finish the rx_max/tx_max setup by flushing buffers and
informing usbnet about the changes.  This way, the settings
can be modified while the netdev is up and running.

Signed-off-by: Bjørn Mork <bjorn@...k.no>
---
 drivers/net/usb/cdc_ncm.c | 31 +++++++++++++++++++++++++------
 1 file changed, 25 insertions(+), 6 deletions(-)

diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index ad29cde75f41..466922a8af4d 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -82,11 +82,20 @@ static void cdc_ncm_update_rxtx_max(struct usbnet *dev, u32 new_rx, u32 new_tx)
 			min, max, val);
 	}
 
+	/* usbnet use these values for sizing rx queues */
+	dev->rx_urb_size = val;
+
 	/* inform device about NTB input size changes */
 	if (val != ctx->rx_max) {
 		__le32 dwNtbInMaxSize = cpu_to_le32(val);
 
 		dev_info(&dev->intf->dev, "setting rx_max = %u\n", val);
+
+		/* need to unlink rx urbs before increasing buffer size */
+		if (netif_running(dev->net) && dev->rx_urb_size > ctx->rx_max)
+			usbnet_unlink_rx_urbs(dev);
+
+		/* tell device to use new size */
 		if (usbnet_write_cmd(dev, USB_CDC_SET_NTB_INPUT_SIZE,
 				     USB_TYPE_CLASS | USB_DIR_OUT
 				     | USB_RECIP_INTERFACE,
@@ -110,7 +119,6 @@ static void cdc_ncm_update_rxtx_max(struct usbnet *dev, u32 new_rx, u32 new_tx)
 	}
 	if (val != ctx->tx_max)
 		dev_info(&dev->intf->dev, "setting tx_max = %u\n", val);
-	ctx->tx_max = val;
 
 	/* Adding a pad byte here if necessary simplifies the handling
 	 * in cdc_ncm_fill_tx_frame, making tx_max always represent
@@ -119,13 +127,24 @@ static void cdc_ncm_update_rxtx_max(struct usbnet *dev, u32 new_rx, u32 new_tx)
 	 * We cannot use dev->maxpacket here because this is called from
 	 * .bind which is called before usbnet sets up dev->maxpacket
 	 */
-	if (ctx->tx_max != le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize) &&
-	    ctx->tx_max % usb_maxpacket(dev->udev, dev->out, 1) == 0)
-		ctx->tx_max++;
+	if (val != le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize) &&
+	    val % usb_maxpacket(dev->udev, dev->out, 1) == 0)
+		val++;
+
+	/* we might need to flush any pending tx buffers if running */
+	if (netif_running(dev->net) && val > ctx->tx_max) {
+		netif_tx_lock_bh(dev->net);
+		usbnet_start_xmit(NULL, dev->net);
+		ctx->tx_max = val;
+		netif_tx_unlock_bh(dev->net);
+	} else {
+		ctx->tx_max = val;
+	}
 
-	/* usbnet use these values for sizing tx/rx queues */
 	dev->hard_mtu = ctx->tx_max;
-	dev->rx_urb_size = ctx->rx_max;
+
+	/* max qlen depend on hard_mtu and rx_urb_size */
+	usbnet_update_max_qlen(dev);
 }
 
 /* helpers for NCM and MBIM differences */
-- 
2.0.0.rc0

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html