lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1399065116-19946-6-git-send-email-bjorn@mork.no>
Date:	Fri,  2 May 2014 23:11:52 +0200
From:	Bjørn Mork <bjorn@...k.no>
To:	netdev@...r.kernel.org
Cc:	linux-usb@...r.kernel.org,
	Alexey Orishko <alexey.orishko@...il.com>,
	Oliver Neukum <oliver@...kum.org>,
	Bjørn Mork <bjorn@...k.no>
Subject: [RFC 5/9] net: cdc_ncm: use ethtool to tune coalescing settings

Datagram coalescing is an integral part of the NCM and MBIM
protocols, intended to reduce the interrupt load primarily
on the device end of the USB link.  As with all coalescing
solutions, there is a trade-off between buffering and
interrupts.

The current defaults are based on the assumption that device
side buffers should be the limiting factor.  However, many
modern high speed LTE modems suffers from buffer-bloat,
making this assumption fail. This results in suboptimal
performance due to excessive coalescing.  And in cases where
such modems are connected to cheap embedded hosts there is
often severe buffer allocation issues, giving very noticable
performance degredation .

A start on improving this is going from build time hard
coded limits to per device user configurable limits.  The
ethtool coalescing API was selected as user interface
because, although the tuned values are buffer sizes, these
settings directly control datagram coalescing.

Signed-off-by: Bjørn Mork <bjorn@...k.no>
---
 drivers/net/usb/cdc_ncm.c   | 68 +++++++++++++++++++++++++++++++++++++++++++--
 include/linux/usb/cdc_ncm.h |  6 +++-
 2 files changed, 70 insertions(+), 4 deletions(-)

diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index 466922a8af4d..b20c82c19e02 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -65,6 +65,62 @@ static void cdc_ncm_tx_timeout_start(struct cdc_ncm_ctx *ctx);
 static enum hrtimer_restart cdc_ncm_tx_timer_cb(struct hrtimer *hr_timer);
 static struct usb_driver cdc_ncm_driver;
 
+static int cdc_ncm_get_coalesce(struct net_device *netdev,
+				struct ethtool_coalesce *ec)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+
+	/* assuming maximum sized dgrams and ignoring NDPs */
+	ec->rx_max_coalesced_frames = ctx->rx_max / ctx->max_datagram_size;
+	ec->tx_max_coalesced_frames = ctx->tx_max / ctx->max_datagram_size;
+
+	/* the timer will fire CDC_NCM_TIMER_PENDING_CNT times in a row */
+	ec->tx_coalesce_usecs = (ctx->timer_interval * CDC_NCM_TIMER_PENDING_CNT) / NSEC_PER_USEC;
+	return 0;
+}
+
+static void cdc_ncm_update_rxtx_max(struct usbnet *dev, u32 new_rx, u32 new_tx);
+
+static int cdc_ncm_set_coalesce(struct net_device *netdev,
+				struct ethtool_coalesce *ec)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+	u32 new_rx_max = ctx->rx_max;
+	u32 new_tx_max = ctx->tx_max;
+
+	/* assuming maximum sized dgrams and a single NDP */
+	if (ec->rx_max_coalesced_frames)
+		new_rx_max = ec->rx_max_coalesced_frames * ctx->max_datagram_size;
+	if (ec->tx_max_coalesced_frames)
+		new_tx_max = ec->tx_max_coalesced_frames * ctx->max_datagram_size;
+
+	if (ec->tx_coalesce_usecs &&
+	    (ec->tx_coalesce_usecs < CDC_NCM_TIMER_INTERVAL_MIN * CDC_NCM_TIMER_PENDING_CNT ||
+	     ec->tx_coalesce_usecs > CDC_NCM_TIMER_INTERVAL_MAX * CDC_NCM_TIMER_PENDING_CNT))
+		return -EINVAL;
+	ctx->timer_interval = ec->tx_coalesce_usecs * NSEC_PER_USEC / CDC_NCM_TIMER_PENDING_CNT;
+
+	/* inform device of new values */
+	if (new_rx_max != ctx->rx_max || new_tx_max != ctx->tx_max)
+		cdc_ncm_update_rxtx_max(dev, new_rx_max, new_tx_max);
+	return 0;
+}
+
+static const struct ethtool_ops cdc_ncm_ethtool_ops = {
+	.get_settings      = usbnet_get_settings,
+	.set_settings      = usbnet_set_settings,
+	.get_link          = usbnet_get_link,
+	.nway_reset        = usbnet_nway_reset,
+	.get_drvinfo       = usbnet_get_drvinfo,
+	.get_msglevel      = usbnet_get_msglevel,
+	.set_msglevel      = usbnet_set_msglevel,
+	.get_ts_info       = ethtool_op_get_ts_info,
+	.get_coalesce      = cdc_ncm_get_coalesce,
+	.set_coalesce      = cdc_ncm_set_coalesce,
+};
+
 /* handle rx_max and tx_max changes */
 static void cdc_ncm_update_rxtx_max(struct usbnet *dev, u32 new_rx, u32 new_tx)
 {
@@ -250,6 +306,9 @@ static int cdc_ncm_init(struct usbnet *dev)
 			(ctx->tx_max_datagrams > CDC_NCM_DPT_DATAGRAMS_MAX))
 		ctx->tx_max_datagrams = CDC_NCM_DPT_DATAGRAMS_MAX;
 
+	/* initial coalescing timer interval */
+	ctx->timer_interval = CDC_NCM_TIMER_INTERVAL_USEC * NSEC_PER_USEC;
+
 	return 0;
 }
 
@@ -589,6 +648,9 @@ advance:
 	/* finish setting up the device specific data */
 	cdc_ncm_setup(dev);
 
+	/* override ethtool_ops */
+	dev->net->ethtool_ops = &cdc_ncm_ethtool_ops;
+
 	return 0;
 
 error2:
@@ -857,7 +919,7 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign)
 		ctx->tx_curr_skb = skb_out;
 		goto exit_no_skb;
 
-	} else if ((n < ctx->tx_max_datagrams) && (ready2send == 0)) {
+	} else if ((n < ctx->tx_max_datagrams) && (ready2send == 0) && (ctx->timer_interval > 0)) {
 		/* wait for more frames */
 		/* push variables */
 		ctx->tx_curr_skb = skb_out;
@@ -909,7 +971,7 @@ static void cdc_ncm_tx_timeout_start(struct cdc_ncm_ctx *ctx)
 	/* start timer, if not already started */
 	if (!(hrtimer_active(&ctx->tx_timer) || atomic_read(&ctx->stop)))
 		hrtimer_start(&ctx->tx_timer,
-				ktime_set(0, CDC_NCM_TIMER_INTERVAL),
+				ktime_set(0, ctx->timer_interval),
 				HRTIMER_MODE_REL);
 }
 
@@ -929,7 +991,7 @@ static void cdc_ncm_txpath_bh(unsigned long param)
 	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
 
 	spin_lock_bh(&ctx->mtx);
-	if (ctx->tx_timer_pending != 0) {
+	if (ctx->tx_timer_pending != 0 && ctx->timer_interval > 0) {
 		ctx->tx_timer_pending--;
 		cdc_ncm_tx_timeout_start(ctx);
 		spin_unlock_bh(&ctx->mtx);
diff --git a/include/linux/usb/cdc_ncm.h b/include/linux/usb/cdc_ncm.h
index 44b38b92236a..07ad8c3284a6 100644
--- a/include/linux/usb/cdc_ncm.h
+++ b/include/linux/usb/cdc_ncm.h
@@ -72,7 +72,9 @@
 /* Restart the timer, if amount of datagrams is less than given value */
 #define	CDC_NCM_RESTART_TIMER_DATAGRAM_CNT	3
 #define	CDC_NCM_TIMER_PENDING_CNT		2
-#define CDC_NCM_TIMER_INTERVAL			(400UL * NSEC_PER_USEC)
+#define CDC_NCM_TIMER_INTERVAL_USEC		400UL
+#define CDC_NCM_TIMER_INTERVAL_MIN		5UL
+#define CDC_NCM_TIMER_INTERVAL_MAX		(15UL * USEC_PER_SEC)
 
 /* The following macro defines the minimum header space */
 #define	CDC_NCM_MIN_HDR_SIZE \
@@ -107,6 +109,8 @@ struct cdc_ncm_ctx {
 	spinlock_t mtx;
 	atomic_t stop;
 
+	u64 timer_interval;
+
 	u32 tx_timer_pending;
 	u32 tx_curr_frame_num;
 	u32 rx_max;
-- 
2.0.0.rc0

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ