netdev - [PATCH net-next v4 2/2] net: systemport: pad packets to a minimum of 64 bytes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1399666599-19398-3-git-send-email-f.fainelli@gmail.com>
Date:	Fri,  9 May 2014 13:16:39 -0700
From:	Florian Fainelli <f.fainelli@...il.com>
To:	netdev@...r.kernel.org
Cc:	davem@...emloft.net, Florian Fainelli <f.fainelli@...il.com>
Subject: [PATCH net-next v4 2/2] net: systemport: pad packets to a minimum of 64 bytes

The switch fabric which is used behind the Broadcom SYSTEMPORT Ethernet
controller will discard any incoming packet that is not 64 bytes or
more. Since the UniMAC hardware transmits up to the specified size, just
make sure that we properly pad the end of the packet with zeroes using
skb_padto() and set a minimum packet length of 64 bytes.

Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
Changes in v4:
- respin due to first patch

Changes in v3:
- reword the commit message and comment to explain the special hardware
  requirements
- print skb_len instead of skb->len in the DMA map failure error

Changes in v2:
- add missing skb_padto() to zero-out packets

 drivers/net/ethernet/broadcom/bcmsysport.c | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index ac42a9e91f3a..dbae674384ea 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -821,6 +821,7 @@ static netdev_tx_t bcm_sysport_xmit(struct sk_buff *skb,
 	struct bcm_sysport_cb *cb;
 	struct netdev_queue *txq;
 	struct dma_desc *desc;
+	unsigned int skb_len;
 	dma_addr_t mapping;
 	u32 len_status;
 	u16 queue;
@@ -848,10 +849,22 @@ static netdev_tx_t bcm_sysport_xmit(struct sk_buff *skb,
 		}
 	}
 
-	mapping = dma_map_single(kdev, skb->data, skb->len, DMA_TO_DEVICE);
+	/* The Ethernet switch we are interfaced with needs packets to be at
+	 * least 64 bytes otherwise they will be discarded when they enter
+	 * the switch port logic. The UniMAC hardware transmits up to the
+	 * specified length.
+	 */
+	if (skb_padto(skb, 64)) {
+		ret = NETDEV_TX_OK;
+		goto out;
+	}
+
+	skb_len = skb->len < 64 ? 64 : skb->len;
+
+	mapping = dma_map_single(kdev, skb->data, skb_len, DMA_TO_DEVICE);
 	if (dma_mapping_error(kdev, mapping)) {
 		netif_err(priv, tx_err, dev, "DMA map failed at %p (len=%d)\n",
-				skb->data, skb->len);
+				skb->data, skb_len);
 		ret = NETDEV_TX_OK;
 		goto out;
 	}
@@ -860,14 +873,14 @@ static netdev_tx_t bcm_sysport_xmit(struct sk_buff *skb,
 	cb = &ring->cbs[ring->curr_desc];
 	cb->skb = skb;
 	dma_unmap_addr_set(cb, dma_addr, mapping);
-	dma_unmap_len_set(cb, dma_len, skb->len);
+	dma_unmap_len_set(cb, dma_len, skb_len);
 
 	/* Fetch a descriptor entry from our pool */
 	desc = ring->desc_cpu;
 
 	desc->addr_lo = lower_32_bits(mapping);
 	len_status = upper_32_bits(mapping) & DESC_ADDR_HI_MASK;
-	len_status |= (skb->len << DESC_LEN_SHIFT);
+	len_status |= (skb_len << DESC_LEN_SHIFT);
 	len_status |= (DESC_SOP | DESC_EOP | TX_STATUS_APP_CRC) <<
 			DESC_STATUS_SHIFT;
 	if (skb->ip_summed == CHECKSUM_PARTIAL)
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html