[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1401436037-4993-1-git-send-email-tklauser@distanz.ch>
Date: Fri, 30 May 2014 09:47:17 +0200
From: Tobias Klauser <tklauser@...tanz.ch>
To: Chris Metcalf <cmetcalf@...era.com>
Cc: netdev@...r.kernel.org
Subject: [PATCH v2 2/2] net: tile: Use helpers from linux/etherdevice.h to check/set MAC
Use is_zero_ether_addr() to check for the MAC address being all zeros instead of
open coding the check.
Also use ether_addr_copy() instead of a manual memcpy() to set the
netdev->dev_addr.
Furthermore, get rid of a redundant assignment of netdev->addr_len. This is
already set by ether_setup() which is called in tile_net_setup().
Signed-off-by: Tobias Klauser <tklauser@...tanz.ch>
Acked-by: Chris Metcalf <cmetcalf@...era.com>
---
v2: only check for zero address
drivers/net/ethernet/tile/tilegx.c | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/tile/tilegx.c b/drivers/net/ethernet/tile/tilegx.c
index 0db40de..14389f8 100644
--- a/drivers/net/ethernet/tile/tilegx.c
+++ b/drivers/net/ethernet/tile/tilegx.c
@@ -2192,7 +2192,6 @@ static void tile_net_dev_init(const char *name, const uint8_t *mac)
{
int ret;
int i;
- int nz_addr = 0;
struct net_device *dev;
struct tile_net_priv *priv;
@@ -2222,15 +2221,10 @@ static void tile_net_dev_init(const char *name, const uint8_t *mac)
* be done before the device is opened. If the MAC is all zeroes,
* we use a random address, since we're probably on the simulator.
*/
- for (i = 0; i < 6; i++)
- nz_addr |= mac[i];
-
- if (nz_addr) {
- memcpy(dev->dev_addr, mac, ETH_ALEN);
- dev->addr_len = 6;
- } else {
+ if (!is_zero_ether_addr(mac))
+ ether_addr_copy(dev->dev_addr, mac);
+ else
eth_hw_addr_random(dev);
- }
/* Register the network device. */
ret = register_netdev(dev);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists