[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1404477430-12261-1-git-send-email-jhs@emojatatu.com>
Date: Fri, 4 Jul 2014 08:37:10 -0400
From: Jamal Hadi Salim <jhs@...atatu.com>
To: stephen@...workplumber.org
Cc: netdev@...r.kernel.org, Jamal Hadi Salim <jhs@...atatu.com>
Subject: [iproute2 PATCH 1/1] iproute2 bridge: bring to above par with brctl show macs
From: Jamal Hadi Salim <jhs@...atatu.com>
root@...a-mojo:bridge# ./bridge fdb help
Usage: bridge fdb { add | append | del | replace } ADDR dev DEV {self|master} [ temp ]
[router] [ dst IPADDR] [ vlan VID ]
[ port PORT] [ vni VNI ] [via DEV]
bridge fdb {show} [ br BRDEV ] [ brport DEV ]
Lets start with two bridges each with a port...
root@...a-mojo:bridge# ./bridge link
10: sw1-p1 state DOWN : <BROADCAST,NOARP> mtu 1500 master sw1 state disabled priority 32 cost 100
11: eth1 state DOWN : <BROADCAST,NOARP> mtu 1500 master br0 state disabled priority 32 cost 100
show all...
root@...a-mojo:bridge# ./bridge fdb show
33:33:00:00:00:01 dev ifb0 self permanent
33:33:00:00:00:01 dev ifb1 self permanent
33:33:00:00:00:01 dev eth0 self permanent
01:00:5e:00:00:01 dev eth0 self permanent
33:33:ff:92:c0:60 dev eth0 self permanent
33:33:00:00:00:fb dev eth0 self permanent
01:00:5e:00:00:fb dev eth0 self permanent
01:00:5e:7f:ff:fd dev eth0 self permanent
01:00:5e:00:00:01 dev wlan0 self permanent
33:33:00:00:00:01 dev wlan0 self permanent
33:33:ff:c2:84:3b dev wlan0 self permanent
33:33:00:00:00:fb dev wlan0 self permanent
01:00:5e:00:00:01 dev virbr0 self permanent
01:00:5e:00:00:fb dev virbr0 self permanent
33:33:00:00:00:01 dev br0 self permanent
33:33:00:00:00:01 dev sw1 self permanent
33:33:00:00:00:01 dev dummy0 self permanent
5e:f4:03:44:da:9a dev sw1-p1 vlan 0 master sw1 permanent
33:33:00:00:00:01 dev sw1-p1 self permanent
b6:5e:dd:ce:d7:5e dev eth1 vlan 0 master br0 permanent
33:33:00:00:00:01 dev eth1 self permanent
Lets see a netdev that is *not* attached to a bridge
root@...a-mojo:bridge# ./bridge fdb show brport eth0
33:33:00:00:00:01 self permanent
01:00:5e:00:00:01 self permanent
33:33:ff:92:c0:60 self permanent
33:33:00:00:00:fb self permanent
01:00:5e:00:00:fb self permanent
01:00:5e:7f:ff:fd self permanent
Lets see a netdev that is bridge port
root@...a-mojo:bridge# ./bridge fdb show brport eth1
hadi@...-1:/media/MT1/other-gits/iproute-jul04/bridge$ ./bridge fdb show brport eth1
b6:5e:dd:ce:d7:5e vlan 0 master br0 permanent
33:33:00:00:00:01 self permanent
Specify the correct bridge and you get good stuff
root@...a-mojo:bridge# ./bridge fdb show brport eth1 br br0
6:5e:dd:ce:d7:5e vlan 0 master br0 permanent
33:33:00:00:00:01 self permanent
Specify the wrong bridge and you get good nada
root@...a-mojo:bridge# ./bridge fdb show brport eth1 br sw1
dump br0
root@...a-mojo:bridge# ./bridge fdb show br br0
33:33:00:00:00:01 dev br0 self permanent
b6:5e:dd:ce:d7:5e dev eth1 vlan 0 master br0 permanent
33:33:00:00:00:01 dev eth1 self permanent
dump sw1
root@...a-mojo:bridge# ./bridge fdb show br sw1
33:33:00:00:00:01 dev sw1 self permanent
5e:f4:03:44:da:9a dev sw1-p1 vlan 0 master sw1 permanent
33:33:00:00:00:01 dev sw1-p1 self permanent
Lets move a port from one bridge to another for shits-and-giggles
(as the New Brunswickians like to say)
root@...a-mojo:bridge# ip link set sw1-p1 master br0
Now dump again br0
root@...a-mojo:bridge# ./bridge fdb show br br0
33:33:00:00:00:01 dev br0 self permanent
5e:f4:03:44:da:9a dev sw1-p1 vlan 0 master br0 permanent
33:33:00:00:00:01 dev sw1-p1 self permanent
b6:5e:dd:ce:d7:5e dev eth1 vlan 0 master br0 permanent
33:33:00:00:00:01 dev eth1 self permanent
Signed-off-by: Jamal Hadi Salim <jhs@...atatu.com>
---
bridge/fdb.c | 38 +++++++++++++++++++++++++++++++++-----
1 file changed, 33 insertions(+), 5 deletions(-)
diff --git a/bridge/fdb.c b/bridge/fdb.c
index 9a07a32..a55fac1 100644
--- a/bridge/fdb.c
+++ b/bridge/fdb.c
@@ -34,7 +34,7 @@ static void usage(void)
fprintf(stderr, "Usage: bridge fdb { add | append | del | replace } ADDR dev DEV {self|master} [ temp ]\n"
" [router] [ dst IPADDR] [ vlan VID ]\n"
" [ port PORT] [ vni VNI ] [via DEV]\n");
- fprintf(stderr, " bridge fdb {show} [ dev DEV ]\n");
+ fprintf(stderr, " bridge fdb {show} [ br BRDEV ] [ brport DEV ]\n");
exit(-1);
}
@@ -161,18 +161,45 @@ int print_fdb(const struct sockaddr_nl *who, struct nlmsghdr *n, void *arg)
static int fdb_show(int argc, char **argv)
{
+ struct {
+ struct nlmsghdr n;
+ struct ifinfomsg ifm;
+ char buf[256];
+ } req;
+
char *filter_dev = NULL;
+ char *br = NULL;
+ int msg_size = sizeof(struct ifinfomsg);
+
+ memset(&req, 0, sizeof(req));
+ req.n.nlmsg_len = NLMSG_LENGTH(sizeof(struct ifinfomsg));
+ req.ifm.ifi_family = PF_BRIDGE;
while (argc > 0) {
- if (strcmp(*argv, "dev") == 0) {
+ if ((strcmp(*argv, "brport") == 0) || strcmp(*argv, "dev") == 0) {
NEXT_ARG();
- if (filter_dev)
- duparg("dev", *argv);
filter_dev = *argv;
+ } else if (strcmp(*argv, "br") == 0) {
+ NEXT_ARG();
+ br = *argv;
+ } else {
+ if (matches(*argv, "help") == 0)
+ usage();
}
argc--; argv++;
}
+ if (br) {
+ int br_ifindex = ll_name_to_index(br);
+ if (br_ifindex == 0) {
+ fprintf(stderr, "Cannot find bridge device \"%s\"\n", br);
+ return -1;
+ }
+ addattr32(&req.n, sizeof(req), IFLA_MASTER, br_ifindex);
+ msg_size += RTA_LENGTH(4);
+ }
+
+ /*we'll keep around filter_dev for older kernels */
if (filter_dev) {
filter_index = if_nametoindex(filter_dev);
if (filter_index == 0) {
@@ -180,9 +207,10 @@ static int fdb_show(int argc, char **argv)
filter_dev);
return -1;
}
+ req.ifm.ifi_index = filter_index;
}
- if (rtnl_wilddump_request(&rth, PF_BRIDGE, RTM_GETNEIGH) < 0) {
+ if (rtnl_dump_request(&rth, RTM_GETNEIGH, &req.ifm, msg_size) < 0) {
perror("Cannot send dump request");
exit(1);
}
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists