| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1407916658-8731-2-git-send-email-ast@plumgrid.com>
Date: Wed, 13 Aug 2014 00:57:12 -0700
From: Alexei Starovoitov <ast@...mgrid.com>
To: "David S. Miller" <davem@...emloft.net>
Cc: Ingo Molnar <mingo@...nel.org>,
Linus Torvalds <torvalds@...ux-foundation.org>,
Andy Lutomirski <luto@...capital.net>,
Steven Rostedt <rostedt@...dmis.org>,
Daniel Borkmann <dborkman@...hat.com>,
Chema Gonzalez <chema@...gle.com>,
Eric Dumazet <edumazet@...gle.com>,
Peter Zijlstra <a.p.zijlstra@...llo.nl>,
"H. Peter Anvin" <hpa@...or.com>,
Andrew Morton <akpm@...ux-foundation.org>,
Kees Cook <keescook@...omium.org>, linux-api@...r.kernel.org,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH RFC v4 net-next 01/26] net: filter: add "load 64-bit immediate" eBPF instruction
add BPF_LD_IMM64 instruction to load 64-bit immediate value into register.
All previous instructions were 8-byte. This is first 16-byte instruction.
Two consecutive 'struct bpf_insn' blocks are interpreted as single instruction:
insn[0/1].code = BPF_LD | BPF_DW | BPF_IMM
insn[0/1].dst_reg = destination register
insn[0].imm = lower 32-bit
insn[1].imm = upper 32-bit
Classic BPF has similar instruction: BPF_LD | BPF_W | BPF_IMM
which loads 32-bit immediate value into a register.
x64 JITs it as single 'movabsq %rax, imm64'
arm64 may JIT as sequence of four 'movk x0, #imm16, lsl #shift' insn
Note that old eBPF programs are binary compatible with new interpreter.
Signed-off-by: Alexei Starovoitov <ast@...mgrid.com>
---
Documentation/networking/filter.txt | 8 +++++++-
arch/x86/net/bpf_jit_comp.c | 9 +++++++++
include/linux/filter.h | 11 +++++++++++
kernel/bpf/core.c | 5 +++++
lib/test_bpf.c | 22 ++++++++++++++++++++++
5 files changed, 54 insertions(+), 1 deletion(-)
diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt
index c48a9704bda8..81916ab5d96f 100644
--- a/Documentation/networking/filter.txt
+++ b/Documentation/networking/filter.txt
@@ -951,7 +951,7 @@ Size modifier is one of ...
Mode modifier is one of:
- BPF_IMM 0x00 /* classic BPF only, reserved in eBPF */
+ BPF_IMM 0x00 /* used for 32-bit mov in classic BPF and 64-bit in eBPF */
BPF_ABS 0x20
BPF_IND 0x40
BPF_MEM 0x60
@@ -995,6 +995,12 @@ BPF_XADD | BPF_DW | BPF_STX: lock xadd *(u64 *)(dst_reg + off16) += src_reg
Where size is one of: BPF_B or BPF_H or BPF_W or BPF_DW. Note that 1 and
2 byte atomic increments are not supported.
+eBPF has one 16-byte instruction: BPF_LD | BPF_DW | BPF_IMM which consists
+of two consecutive 'struct bpf_insn' 8-byte blocks and interpreted as single
+instruction that loads 64-bit immediate value into a dst_reg.
+Classic BPF has similar instruction: BPF_LD | BPF_W | BPF_IMM which loads
+32-bit immediate value into a register.
+
Testing
-------
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 5c8cb8043c5a..67b666aab20e 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -393,6 +393,15 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
EMIT1_off32(add_1reg(0xB8, dst_reg), imm32);
break;
+ case BPF_LD | BPF_IMM | BPF_DW:
+ /* movabsq %rax, imm64 */
+ EMIT2(add_1mod(0x48, dst_reg), add_1reg(0xB8, dst_reg));
+ EMIT(insn->imm, 4);
+ insn++;
+ i++;
+ EMIT(insn->imm, 4);
+ break;
+
/* dst %= src, dst /= src, dst %= imm32, dst /= imm32 */
case BPF_ALU | BPF_MOD | BPF_X:
case BPF_ALU | BPF_DIV | BPF_X:
diff --git a/include/linux/filter.h b/include/linux/filter.h
index a5227ab8ccb1..73a6d505e729 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -161,6 +161,17 @@ enum {
.off = 0, \
.imm = IMM })
+/* use two of BPF_LD_IMM64 to encode single move 64-bit insn
+ * first macro to carry lower 32-bits and second for higher 32-bits
+ */
+#define BPF_LD_IMM64(DST, IMM) \
+ ((struct bpf_insn) { \
+ .code = BPF_LD | BPF_DW | BPF_IMM, \
+ .dst_reg = DST, \
+ .src_reg = 0, \
+ .off = 0, \
+ .imm = IMM })
+
/* Short form of mov based on type, BPF_X: dst_reg = src_reg, BPF_K: dst_reg = imm32 */
#define BPF_MOV64_RAW(TYPE, DST, SRC, IMM) \
diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index 7f0dbcbb34af..0434c2170f2b 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -180,6 +180,7 @@ static unsigned int __bpf_prog_run(void *ctx, const struct bpf_insn *insn)
[BPF_LD | BPF_IND | BPF_W] = &&LD_IND_W,
[BPF_LD | BPF_IND | BPF_H] = &&LD_IND_H,
[BPF_LD | BPF_IND | BPF_B] = &&LD_IND_B,
+ [BPF_LD | BPF_IMM | BPF_DW] = &&LD_IMM_DW,
};
void *ptr;
int off;
@@ -239,6 +240,10 @@ select_insn:
ALU64_MOV_K:
DST = IMM;
CONT;
+ LD_IMM_DW:
+ DST = (u64) (u32) insn[0].imm | ((u64) (u32) insn[1].imm) << 32;
+ insn++;
+ CONT;
ALU64_ARSH_X:
(*(s64 *) &DST) >>= SRC;
CONT;
diff --git a/lib/test_bpf.c b/lib/test_bpf.c
index 89e0345733bd..d59444262dc0 100644
--- a/lib/test_bpf.c
+++ b/lib/test_bpf.c
@@ -1697,6 +1697,28 @@ static struct bpf_test tests[] = {
{ },
{ { 1, 0 } },
},
+ {
+ "load 64-bit immediate",
+ .u.insns_int = {
+ BPF_LD_IMM64(R1, 0x1234), /* lower 32-bit */
+ BPF_LD_IMM64(R1, 0x5678), /* higher 32-bit */
+ BPF_MOV64_REG(R2, R1),
+ BPF_MOV64_REG(R3, R2),
+ BPF_ALU64_IMM(BPF_RSH, R2, 32),
+ BPF_ALU64_IMM(BPF_LSH, R3, 32),
+ BPF_ALU64_IMM(BPF_RSH, R3, 32),
+ BPF_ALU64_IMM(BPF_MOV, R0, 0),
+ BPF_JMP_IMM(BPF_JEQ, R2, 0x5678, 1),
+ BPF_EXIT_INSN(),
+ BPF_JMP_IMM(BPF_JEQ, R3, 0x1234, 1),
+ BPF_EXIT_INSN(),
+ BPF_ALU64_IMM(BPF_MOV, R0, 1),
+ BPF_EXIT_INSN(),
+ },
+ INTERNAL,
+ { },
+ { { 0, 1 } }
+ },
};
static struct net_device dev;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists