Message-ID: <5417223D.6070408@intel.com>
Date:	Mon, 15 Sep 2014 10:30:37 -0700
From:	Alexander Duyck <alexander.h.duyck@...el.com>
To:	Andrew Lunn <andrew@...n.ch>, f.fainelli@...il.com
CC:	seugene@...vell.com, Andrew Lunn <lunn@...n.ch>,
	netdev@...r.kernel.org
Subject: Re: DSA and skb->protocol

On 09/14/2014 08:37 AM, Andrew Lunn wrote:
> Hi Florian
> 
> I've been debugging a WARNING when using DSA with a D-Link
> DIR665. I've had reports of the same warning with another device.
> 
> WARNING: CPU: 0 PID: 2014 at net/core/dev.c:2260 skb_warn_bad_offload+0xd0/0x104()
> mv643xx_eth_port: caps=(0x0000000400014803, 0x00000000001b482b) len=1722 data_len=16 gso_size=1448 gso_type=1 gso_segs 2 ip_summed=3 encapsulation 0 features 400014801
> Modules linked in:
> CPU: 0 PID: 2014 Comm: sshd Tainted: G        W      3.17.0-rc1-00007-g2f06b2c08099-dirty #228
> [<c000e2a0>] (unwind_backtrace) from [<c000bd88>] (show_stack+0x10/0x14)
> [<c000bd88>] (show_stack) from [<c0016db8>] (warn_slowpath_common+0x6c/0x8c)
> [<c0016db8>] (warn_slowpath_common) from [<c0016e08>] (warn_slowpath_fmt+0x30/0x40)
> [<c0016e08>] (warn_slowpath_fmt) from [<c04ebad4>] (skb_warn_bad_offload+0xd0/0x104)
> [<c04ebad4>] (skb_warn_bad_offload) from [<c03eea5c>] (skb_checksum_help+0x160/0x170)
> [<c03eea5c>] (skb_checksum_help) from [<c03eef40>] (dev_hard_start_xmit+0x3f8/0x4c0)
> [<c03eef40>] (dev_hard_start_xmit) from [<c04071ec>] (sch_direct_xmit+0x148/0x250)
> [<c04071ec>] (sch_direct_xmit) from [<c03ef280>] (__dev_queue_xmit+0x278/0x5f4)
> [<c03ef280>] (__dev_queue_xmit) from [<c04719b8>] (edsa_xmit+0xf8/0x2c8)
> [<c04719b8>] (edsa_xmit) from [<c03eee24>] (dev_hard_start_xmit+0x2dc/0x4c0)
> [<c03eee24>] (dev_hard_start_xmit) from [<c03ef3cc>] (__dev_queue_xmit+0x3c4/0x5f4)
> [<c03ef3cc>] (__dev_queue_xmit) from [<c0415e88>] (ip_finish_output+0x64c/0x920)
> [<c0415e88>] (ip_finish_output) from [<c0416e2c>] (ip_local_out_sk+0x34/0x38)
> [<c0416e2c>] (ip_local_out_sk) from [<c0417144>] (ip_queue_xmit+0x128/0x388)
> [<c0417144>] (ip_queue_xmit) from [<c042caa8>] (tcp_transmit_skb+0x534/0x93c)
> [<c042caa8>] (tcp_transmit_skb) from [<c042cff8>] (tcp_write_xmit+0x148/0xbf8)
> [<c042cff8>] (tcp_write_xmit) from [<c042dd7c>] (__tcp_push_pending_frames+0x30/0x9c)
> [<c042dd7c>] (__tcp_push_pending_frames) from [<c041fbc8>] (tcp_sendmsg+0xc0/0xcec)
> [<c041fbc8>] (tcp_sendmsg) from [<c0445710>] (inet_sendmsg+0x3c/0x70)
> [<c0445710>] (inet_sendmsg) from [<c03d7d5c>] (sock_aio_write+0xcc/0xec)
> [<c03d7d5c>] (sock_aio_write) from [<c00bb218>] (do_sync_write+0x7c/0xa4)
> [<c00bb218>] (do_sync_write) from [<c00bbc40>] (vfs_write+0x108/0x1b0)
> [<c00bbc40>] (vfs_write) from [<c00bc214>] (SyS_write+0x40/0x94)
> [<c00bc214>] (SyS_write) from [<c0009480>] (ret_fast_syscall+0x0/0x2c)
> ---[ end trace b1b02d15aba4766a ]---
> 
> I think i understand what is going on, and one of your recent patches
> may indicate you have seen something similar.
> 
> int dev_hard_start_xmit() we have:
> 
> 2607 
> 2608                 features = netif_skb_features(skb);
> 
> ...
> 2637                         /* If packet is not checksummed and device does not
> 2638                          * support checksumming for this protocol, complete
> 2639                          * checksumming here.
> 2640                          */
> 2641                         if (skb->ip_summed == CHECKSUM_PARTIAL) {
> 2642                                 if (skb->encapsulation)
> 2643                                         skb_set_inner_transport_header(skb,
> 2644                                                 skb_checksum_start_offset(skb));
> 2645                                 else
> 2646                                         skb_set_transport_header(skb,
> 2647                                                 skb_checksum_start_offset(skb));
> 2648                                 if (!(features & NETIF_F_ALL_CSUM) &&
> 2649                                      skb_checksum_help(skb))
> 2650                                         goto out_kfree_skb;
> 2651                         }
> 
> This packet is CHECKSUM_PARTIAL, but it is also a GSO packet, with two
> segments, so the skb_checksum_help() is throwing the warning. It is
> expected that the hardware with do the checksum when using GSO. The
> reason it is trying to do software checksums, not hardware, is because
> features does not indicate the protocol is supported by hardware
> checksumming. This i initially thought was odd, since this is a TCP/IP
> packet, as you can see from the stack trace. However, 
> 
> netif_skb_features(skb) calls harmonize_features() which calls
> can_checksum_protocol():
> 
> 3206 static inline bool can_checksum_protocol(netdev_features_t features,
> 3207                                          __be16 protocol)
> 3208 {
> 3209         return ((features & NETIF_F_GEN_CSUM) ||
> 3210                 ((features & NETIF_F_V4_CSUM) &&
> 3211                  protocol == htons(ETH_P_IP)) ||
> 3212                 ((features & NETIF_F_V6_CSUM) &&
> 3213                  protocol == htons(ETH_P_IPV6)) ||
> 3214                 ((features & NETIF_F_FCOE_CRC) &&
> 3215                  protocol == htons(ETH_P_FCOE)));
> 3216 }
> 
> However looking in the skb, we see protocol is now ETH_P_EDSA, not
> ETH_P_IP. Hence the hardware does not support this protocol.
> 
> This protocol value is because edsa_xmit() changes it in the slave
> device TX path.
> 
> Your patch "net: dsa: change tag_protocol to an enum"
> has a hunk:
> 
> diff --git a/net/dsa/tag_brcm.c b/net/dsa/tag_brcm.c
> index e0b759ec209e..8fbc21c0de78 100644
> --- a/net/dsa/tag_brcm.c
> +++ b/net/dsa/tag_brcm.c
> @@ -91,7 +91,6 @@ static netdev_tx_t brcm_tag_xmit(struct sk_buff *skb, struct net_device *dev)
>         /* Queue the SKB for transmission on the parent interface, but
>          * do not modify its EtherType
>          */
> -       skb->protocol = htons(ETH_P_BRCMTAG);
>         skb->dev = p->parent->dst->master_netdev;
>         dev_queue_xmit(skb);
> 
> making me think it is not actually needed to change
> skb->protocol. When i remove this from edsa_xmit(), the warning goes
> away and networking seems to work O.K.
> 
> Is this the right fix? Should we remove this setting of skb->protocol
> in the other dsa xmit functions?
> 
> Thanks
> 	Andrew
> 

No, if anything they should all be using ETH_P_XDSA to indicate the
protocol between the switch and the host network interface.  When you
triggered this issue did you by any chance change some of the settings
on the host netdev for the switch?

>From what I can tell it looks like the issue might be related to the
fact that the slave features are based off of the vlan_features for the
host device.  If for example the vlan_features on your host device were
recently changed that could be one cause for this issue.

The fix would probably be to update skb_network_protocol so that it can
sort out ETH_P_XDSA tags and get the Ethertype from the frame.

Thanks,

Alex


--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists