[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20141023164052.GB21343@roeck-us.net>
Date: Thu, 23 Oct 2014 09:40:52 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: Andrew Lunn <andrew@...n.ch>
Cc: netdev@...r.kernel.org, "David S. Miller" <davem@...emloft.net>,
Florian Fainelli <f.fainelli@...il.com>,
linux-kernel@...r.kernel.org, Chris Healy <chealy@...co-us.com>
Subject: Re: [PATCH 10/14] net: dsa/mv88e6352: Implement EEPROM access
functions
On Thu, Oct 23, 2014 at 03:54:12PM +0200, Andrew Lunn wrote:
> On Wed, Oct 22, 2014 at 09:03:18PM -0700, Guenter Roeck wrote:
> > MV88E6352 supports read and write access to its configuration eeprom.
>
> Hi Guenter
>
> I don't have the datasheet for the MV88E6352. Is the EEPROM built in,
> or external on an i2c bus?
>
External.
> > +static int mv88e6352_get_eeprom_len(struct dsa_switch *ds)
> > +{
> > + return 0x200;
> > +}
>
> How do you handle the case of it being external and not populated.
> Would it not be better to try to detect it here, and return 0 if it
> does not exist?
>
Makes sense, if it is detectable that it the EEPROM not there. Browsing
through the datasheet, I don't see how I could detect it; there does not
seem to be a status bit indicating if the EEPROM is there or not. There
are sw_mode pins which determine if the eeprom should be loaded after
reset or not, but I don't see anything in the register set which would
tell me.
Chris, do you know if there is a means to detect if the EEPROM is present
on the MV88E6352 ?
Thanks,
Guenter
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists