lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Wed, 29 Oct 2014 19:38:45 +0100 From: Sebastian Hesselbarth <sebastian.hesselbarth@...il.com> To: unlisted-recipients:; (no To-header on input) CC: "David S. Miller" <davem@...emloft.net>, Antoine Ténart <antoine.tenart@...e-electrons.com>, Florian Fainelli <f.fainelli@...il.com>, Eric Miao <eric.y.miao@...il.com>, Haojian Zhuang <haojian.zhuang@...il.com>, linux-arm-kernel@...ts.infradead.org, netdev@...r.kernel.org, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org Subject: Re: [PATCH v2 6/9] ARM: berlin: Add BG2 ethernet DT nodes On 22.10.2014 20:26, Sebastian Hesselbarth wrote: > Marvell BG2 has two fast ethernet controllers with internal PHY, > add the corresponding nodes to SoC dtsi. > > Tested-by: Antoine Ténart <antoine.tenart@...e-electrons.com> > Reviewed-by: Florian Fainelli <f.fainelli@...il.com> > Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@...il.com> Applied the four DT patches to berlin/dt. Sebastian > --- > Changelog: > v1->v2: > - move phy-connection-type to controller node instead of PHY node > (Reported by Sergei Shtylyov) > > Cc: "David S. Miller" <davem@...emloft.net> > Cc: "Antoine Ténart" <antoine.tenart@...e-electrons.com> > Cc: Florian Fainelli <f.fainelli@...il.com> > Cc: Eric Miao <eric.y.miao@...il.com> > Cc: Haojian Zhuang <haojian.zhuang@...il.com> > Cc: linux-arm-kernel@...ts.infradead.org > Cc: netdev@...r.kernel.org > Cc: devicetree@...r.kernel.org > Cc: linux-kernel@...r.kernel.org > --- > arch/arm/boot/dts/berlin2.dtsi | 36 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 36 insertions(+) > > diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi > index 9d7c810ebd0b..dc0227dfc691 100644 > --- a/arch/arm/boot/dts/berlin2.dtsi > +++ b/arch/arm/boot/dts/berlin2.dtsi > @@ -79,11 +79,47 @@ > clocks = <&chip CLKID_TWD>; > }; > > + eth1: ethernet@...000 { > + compatible = "marvell,pxa168-eth"; > + reg = <0xb90000 0x10000>; > + clocks = <&chip CLKID_GETH1>; > + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; > + /* set by bootloader */ > + local-mac-address = [00 00 00 00 00 00]; > + #address-cells = <1>; > + #size-cells = <0>; > + phy-connection-type = "mii"; > + phy-handle = <ðphy1>; > + status = "disabled"; > + > + ethphy1: ethernet-phy@0 { > + reg = <0>; > + }; > + }; > + > cpu-ctrl@...000 { > compatible = "marvell,berlin-cpu-ctrl"; > reg = <0xdd0000 0x10000>; > }; > > + eth0: ethernet@...000 { > + compatible = "marvell,pxa168-eth"; > + reg = <0xe50000 0x10000>; > + clocks = <&chip CLKID_GETH0>; > + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; > + /* set by bootloader */ > + local-mac-address = [00 00 00 00 00 00]; > + #address-cells = <1>; > + #size-cells = <0>; > + phy-connection-type = "mii"; > + phy-handle = <ðphy0>; > + status = "disabled"; > + > + ethphy0: ethernet-phy@0 { > + reg = <0>; > + }; > + }; > + > apb@...000 { > compatible = "simple-bus"; > #address-cells = <1>; > -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists