netdev - Re: [PATCH] SSB / B44: fix WOL for BCM4401

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <547E3BF5.5060201@lwfinger.net>
Date:	Tue, 02 Dec 2014 16:23:49 -0600
From:	Larry Finger <Larry.Finger@...inger.net>
To:	Michael Büsch <m@...s.ch>,
	Andrey Skvortsov <andrej.skvortzov@...il.com>
CC:	"Rafael J. Wysocki" <rjw@...ysocki.net>, Gary.Zambrano@...gic.com,
	netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
	b43-dev <b43-dev@...ts.infradead.org>,
	Rafał Miłecki <zajec5@...il.com>
Subject: Re: [PATCH] SSB / B44: fix WOL for BCM4401

On 12/02/2014 02:12 PM, Michael Büsch wrote:
> On Tue, 2 Dec 2014 23:01:29 +0300
> Andrey Skvortsov <andrej.skvortzov@...il.com> wrote:
>
>> On Mon, Dec 01, 2014 at 10:10:23PM +0100, Michael Büsch wrote:
>>> On Mon,  1 Dec 2014 23:46:38 +0300
>>> Andrey Skvortsov <andrej.skvortzov@...il.com> wrote:
>>>
>>>> Wake On Lan was not working on laptop DELL Vostro 1500.
>>>> If WOL was turned on, BCM4401 was powered up in suspend mode. LEDs blinked.
>>>> But the laptop could not be woken up with the Magic Packet. The reason for
>>>> that was that PCIE was not enabled as a system wakeup source and
>>>> therefore the host PCI bridge was not powered up in suspend mode.
>>>> PCIE was not enabled in suspend by PM because no child devices were
>>>> registered as wakeup source during suspend process.
>>>> On laptop BCM4401 is connected through the SSB bus, that is connected to the
>>>> PCI-Express bus. SSB and B44 did not use standard PM wakeup functions
>>>> and did not forward wakeup settings to their parents.
>>>> To fix that B44 driver enables PM wakeup and registers new wakeup source
>>>> using device_set_wakeup_enable(). Wakeup is automatically reported to the parent SSB
>>>> bus via power.wakeup_path. SSB bus enables wakeup for the parent PCI bridge, if there is any
>>>> child devices with enabled wakeup functionality. All other steps are
>>>> done by PM core code.
>>>
>>> Thanks, this looks good.
>>> I assume you tested this (I currently don't have a device to test this).
>>
>> Sure, I've tested it. WOL from suspend is working and after resume from hibernate Ethernet is working too.
>
> That sounds good, indeed.
> I'd still prefer, if someone with b43 (wireless) would test it, too.

I did a partial test with my PowerBook G4. With the patch installed, it would 
both suspend and hibernate, but WOL would be impossible. This computer uses a 
PCMCIA version of the BCM4318, and power is turned off to the PCMCIA card when 
suspended or hibernating.

If WOL works for the OP, then I think we can ACK this patch.

Larry


--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html