| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 12 Feb 2015 10:47:45 -0600 From: Vince Bridgers <vbridger@...nsource.altera.com> To: <netdev@...r.kernel.org>, <nios2-dev@...ts.rocketboards.org>, <linux-kernel@...r.kernel.org> CC: <vbridger@...era.com>, <vbridger@...nsource.altera.com> Subject: [PATCH net] net: eth: altera: Change reset_mac failure message masks from err to dbg This debug output is not really an error message since mac reset can fail if the phy clocks are gated, specifically when the phy has been placed in a powered down or isolation mode. The netdev output masks were changed from err to dbg, and comments added in the code. Signed-off-by: Vince Bridgers <vbridger@...nsource.altera.com> --- drivers/net/ethernet/altera/altera_tse_main.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/altera/altera_tse_main.c b/drivers/net/ethernet/altera/altera_tse_main.c index 760c72c..996bdf1 100644 --- a/drivers/net/ethernet/altera/altera_tse_main.c +++ b/drivers/net/ethernet/altera/altera_tse_main.c @@ -1099,8 +1099,12 @@ static int tse_open(struct net_device *dev) spin_lock(&priv->mac_cfg_lock); ret = reset_mac(priv); + /* Note that reset_mac will fail if the clocks are gated by the PHY + * due to the PHY being put into isolation or power down mode. + * This is not an error if reset fails due to no clock. + */ if (ret) - netdev_err(dev, "Cannot reset MAC core (error: %d)\n", ret); + netdev_dbg(dev, "Cannot reset MAC core (error: %d)\n", ret); ret = init_mac(priv); spin_unlock(&priv->mac_cfg_lock); @@ -1204,8 +1208,12 @@ static int tse_shutdown(struct net_device *dev) spin_lock(&priv->tx_lock); ret = reset_mac(priv); + /* Note that reset_mac will fail if the clocks are gated by the PHY + * due to the PHY being put into isolation or power down mode. + * This is not an error if reset fails due to no clock. + */ if (ret) - netdev_err(dev, "Cannot reset MAC core (error: %d)\n", ret); + netdev_dbg(dev, "Cannot reset MAC core (error: %d)\n", ret); priv->dmaops->reset_dma(priv); free_skbufs(dev); -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists