| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1434616967-38930-1-git-send-email-Shengzhou.Liu@freescale.com>
Date: Thu, 18 Jun 2015 16:42:47 +0800
From: Shengzhou Liu <Shengzhou.Liu@...escale.com>
To: <netdev@...r.kernel.org>, <f.fainelli@...il.com>
CC: Shengzhou Liu <Shengzhou.Liu@...escale.com>
Subject: [PATCH] net/phy: Add support for Realtek RTL8211F
RTL8211F has different register definitions from RTL8211E.
Specially it needs to enable TXDLY in case of RGMII.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@...escale.com>
---
drivers/net/phy/realtek.c | 68 ++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 67 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 96a0f0f..4535361 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -22,8 +22,12 @@
#define RTL821x_INER 0x12
#define RTL821x_INER_INIT 0x6400
#define RTL821x_INSR 0x13
+#define RTL8211E_INER_LINK_STATUS 0x400
-#define RTL8211E_INER_LINK_STATUS 0x400
+#define RTL8211F_INER_LINK_STATUS 0x0010
+#define RTL8211F_INSR 0x1d
+#define RTL8211F_PAGE_SELECT 0x1f
+#define RTL8211F_TX_DELAY 0x100
MODULE_DESCRIPTION("Realtek PHY driver");
MODULE_AUTHOR("Johnson Leung");
@@ -38,6 +42,18 @@ static int rtl821x_ack_interrupt(struct phy_device *phydev)
return (err < 0) ? err : 0;
}
+static int rtl8211f_ack_interrupt(struct phy_device *phydev)
+{
+ int err;
+
+ phy_write(phydev, RTL8211F_PAGE_SELECT, 0xa43);
+ err = phy_read(phydev, RTL8211F_INSR);
+ /* restore to default page 0 */
+ phy_write(phydev, RTL8211F_PAGE_SELECT, 0x0);
+
+ return (err < 0) ? err : 0;
+}
+
static int rtl8211b_config_intr(struct phy_device *phydev)
{
int err;
@@ -64,6 +80,41 @@ static int rtl8211e_config_intr(struct phy_device *phydev)
return err;
}
+static int rtl8211f_config_intr(struct phy_device *phydev)
+{
+ int err;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ err = phy_write(phydev, RTL821x_INER,
+ RTL8211F_INER_LINK_STATUS);
+ else
+ err = phy_write(phydev, RTL821x_INER, 0);
+
+ return err;
+}
+
+static int rtl8211f_config_init(struct phy_device *phydev)
+{
+ int ret;
+ u16 reg;
+
+ ret = genphy_config_init(phydev);
+ if (ret < 0)
+ return ret;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII) {
+ /* enable TXDLY */
+ phy_write(phydev, RTL8211F_PAGE_SELECT, 0xd08);
+ reg = phy_read(phydev, 0x11);
+ reg |= RTL8211F_TX_DELAY;
+ phy_write(phydev, 0x11, reg);
+ /* restore to default page 0 */
+ phy_write(phydev, RTL8211F_PAGE_SELECT, 0x0);
+ }
+
+ return 0;
+}
+
static struct phy_driver realtek_drvs[] = {
{
.phy_id = 0x00008201,
@@ -98,6 +149,20 @@ static struct phy_driver realtek_drvs[] = {
.suspend = genphy_suspend,
.resume = genphy_resume,
.driver = { .owner = THIS_MODULE,},
+ }, {
+ .phy_id = 0x001cc916,
+ .name = "RTL8211F Gigabit Ethernet",
+ .phy_id_mask = 0x001fffff,
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &genphy_config_aneg,
+ .config_init = &rtl8211f_config_init,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &rtl8211f_ack_interrupt,
+ .config_intr = &rtl8211f_config_intr,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE },
},
};
@@ -106,6 +171,7 @@ module_phy_driver(realtek_drvs);
static struct mdio_device_id __maybe_unused realtek_tbl[] = {
{ 0x001cc912, 0x001fffff },
{ 0x001cc915, 0x001fffff },
+ { 0x001cc916, 0x001fffff },
{ }
};
--
2.1.0.27.g96db324
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists