netdev - Re: [PATCH] net: switchdev: restrict vid range abstraction

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <117624450.145106.1438197245281.JavaMail.zimbra@savoirfairelinux.com>
Date:	Wed, 29 Jul 2015 15:14:05 -0400 (EDT)
From:	Vivien Didelot <vivien.didelot@...oirfairelinux.com>
To:	David <davem@...emloft.net>
Cc:	sfeldma@...il.com, netdev <netdev@...r.kernel.org>,
	jiri@...nulli.us, Florian Fainelli <f.fainelli@...il.com>,
	linux-kernel <linux-kernel@...r.kernel.org>,
	kernel <kernel@...oirfairelinux.com>
Subject: Re: [PATCH] net: switchdev: restrict vid range abstraction

Hi Scott, David,

On Jul 29, 2015, at 2:28 PM, David davem@...emloft.net wrote:

> From: Scott Feldman <sfeldma@...il.com>
> Date: Wed, 29 Jul 2015 00:31:44 -0700
> 
>> Since the netlink request (for example vlan add) includes the range,
>> I'm not seeing how we can response with success for the satisfied
>> vlans in the range, and also respond with an error for the unsatisfied
>> vlans in the range.   In other words, from the netlink msgs
>> perspective, we need to treat a vlan range as all-or-nothing.  So in
>> your example, if hw can't add vlan 2, we fail the entire request to
>> add range 2-5.  This is where the prepare phase checks to make sure
>> the entire request can be satisfied before committing to hw.

I made this change in order to start restricting the bridge abstraction
to switchdev, since IMHO its info flags do not add much value to the
switch chip drivers perspective.

While a range might be convenient to a user, exposing it to drivers is
likely to end up writing the same vid_begin to vid_end for loop.

> This was my concern with the change as well.
> 
> The user asked for the range to be installed, so if any portion
> of it cannot be done we must not make any changes to the HW
> configuration and fail the entire request.

I understand the concern with the netlink request.

However, this can be confusing to someone. With the previous example:

    bridge vlan add dev port0 vid 2-5 master

must fail for the entire range (due to the single netlink request). But:

    bridge vlan add dev port0 vid 2 master

will silently fallback to software VLAN (assuming that the driver
correctly returned -EOPNOTSUPP in the prepare phase). In other words, no
changes has been committed to the hardware.

Thanks,
-v
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html