[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <55B9442F.6040501@ti.com>
Date: Wed, 29 Jul 2015 17:22:55 -0400
From: Murali Karicheri <m-karicheri2@...com>
To: Eric Dumazet <eric.dumazet@...il.com>,
WingMan Kwok <w-kwok2@...com>
CC: <davem@...emloft.net>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 2/2] net: netcp: Allocate RX packet buffers using __GFP_DMA
On 07/29/2015 04:59 PM, Eric Dumazet wrote:
> On Wed, 2015-07-29 at 11:10 -0400, WingMan Kwok wrote:
>> The Keystone II DMA hardware can only access addresses in the
>> lower 2 GiB of SDRAM. This patch makes sure the RX buffers are
>> allocated using the __GFP_DMA flag so they meet this requirement.
>>
>> Signed-off-by: WingMan Kwok <w-kwok2@...com>
>> Signed-off-by: Reece R. Pollack <x0183204@...com>
>> ---
>> drivers/net/ethernet/ti/netcp_core.c | 11 +++++++----
>> 1 file changed, 7 insertions(+), 4 deletions(-)
>
> Following patch gets rid of netdev_alloc_frag() which is not GFP_DMA
> ready (and wont be)
>
Eric,
Thanks for the suggestion.
I think the original assumption was that kmalloc() always allocate a
minimum of 1 page for regular or small sized packets. The usage of
netdev_alloc_frag() is to allocate small sized buffers. However
kmalloc() can return different size buffers (/proc/slabinfo) and your
below code should work fine for our driver. We will rework the patch as
per your suggestion.
Murali
> diff --git a/drivers/net/ethernet/ti/netcp_core.c b/drivers/net/ethernet/ti/netcp_core.c
> index 3ca87f26582a..0971c46d6cd5 100644
> --- a/drivers/net/ethernet/ti/netcp_core.c
> +++ b/drivers/net/ethernet/ti/netcp_core.c
> @@ -808,14 +808,8 @@ static void netcp_allocate_rx_buf(struct netcp_intf *netcp, int fdq)
> primary_buf_len = SKB_DATA_ALIGN(buf_len) +
> SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
>
> - if (primary_buf_len <= PAGE_SIZE) {
> - bufptr = netdev_alloc_frag(primary_buf_len);
> - pad[1] = primary_buf_len;
> - } else {
> - bufptr = kmalloc(primary_buf_len, GFP_ATOMIC |
> - GFP_DMA32 | __GFP_COLD);
> - pad[1] = 0;
> - }
> + bufptr = kmalloc(primary_buf_len, GFP_ATOMIC | GFP_DMA);
> + pad[1] = 0;
>
> if (unlikely(!bufptr)) {
> dev_warn_ratelimited(netcp->ndev_dev, "Primary RX buffer alloc failed\n");
> @@ -827,7 +821,7 @@ static void netcp_allocate_rx_buf(struct netcp_intf *netcp, int fdq)
>
> } else {
> /* Allocate a secondary receive queue entry */
> - page = alloc_page(GFP_ATOMIC | GFP_DMA32 | __GFP_COLD);
> + page = alloc_page(GFP_ATOMIC | GFP_DMA | __GFP_COLD);
> if (unlikely(!page)) {
> dev_warn_ratelimited(netcp->ndev_dev, "Secondary page alloc failed\n");
> goto fail;
>
>
>
>
--
Murali Karicheri
Linux Kernel, Keystone
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists