[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1439303756-30333-1-git-send-email-Liviu.Dudau@arm.com>
Date: Tue, 11 Aug 2015 15:35:56 +0100
From: Liviu Dudau <Liviu.Dudau@....com>
To: Stephen Hemminger <stephen@...workplumber.org>,
Florian Fainelli <f.fainelli@...il.com>
Cc: Mirko Lindner <mlindner@...vell.com>,
Ryan Harkin <ryan.harkin@...aro.org>,
netdev <netdev@...r.kernel.org>,
lkml <linux-kernel@...r.kernel.org>
Subject: [PATCH v2 net-next] sky2: use random address if EEPROM is bad
On some embedded systems the EEPROM does not contain a valid MAC address.
In that case it is better to fallback to a generated mac address and
let init scripts fix the value later.
Reported-by: Liviu Dudau <Liviu.Dudau@....com>
Signed-off-by: Stephen Hemminger <stephen@...workplumber.org>
[Changed handcoded setup to use eth_hw_addr_random() instead]
Signed-off-by: Liviu Dudau <Liviu.Dudau@....com>
---
I have tested this on my Juno platform and I can successfully do an nfsroot boot.
Best regards,
Liviu
drivers/net/ethernet/marvell/sky2.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c
index d9f4498..c309879 100644
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -4819,6 +4819,13 @@ static struct net_device *sky2_init_netdev(struct sky2_hw *hw, unsigned port,
memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8,
ETH_ALEN);
+ /* if the address is invalid, use a random value */
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ netdev_warn(dev,
+ "Invalid MAC address, defaulting to random\n");
+ eth_hw_addr_random(dev);
+ }
+
return dev;
}
--
2.4.6
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists