[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <5641F04A.9060303@baylibre.com>
Date: Tue, 10 Nov 2015 14:25:30 +0100
From: Neil Armstrong <narmstrong@...libre.com>
To: netdev@...r.kernel.org
Cc: linux-kernel@...r.kernel.org,
"David S. Miller" <davem@...emloft.net>,
Florian Fainelli <f.fainelli@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Guenter Roeck <linux@...ck-us.net>,
Neil Armstrong <narmstrong@...libre.com>,
Vivien Didelot <vivien.didelot@...oirfairelinux.com>
Subject: [PATCH 5/6] net: dsa: mv88e6060: add register defines header file
To align with the mv88e6xxx code, add a similar header file
with all the register defines.
The file is based on the mv88e6xxx header for coherency.
Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
---
drivers/net/dsa/mv88e6060.h | 108 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 108 insertions(+)
create mode 100644 drivers/net/dsa/mv88e6060.h
diff --git a/drivers/net/dsa/mv88e6060.h b/drivers/net/dsa/mv88e6060.h
new file mode 100644
index 0000000..adbc894
--- /dev/null
+++ b/drivers/net/dsa/mv88e6060.h
@@ -0,0 +1,108 @@
+/*
+ * net/dsa/mv88e6060.h - Marvell 88e6060 switch chip support
+ * Copyright (c) 2008 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __MV88E6060_H
+#define __MV88E6060_H
+
+#define MV88E6060_PORTS 6
+
+#define REG_PORT(p) (0x8 + (p))
+#define PORT_STATUS 0x00
+#define PORT_STATUS_PAUSE_EN BIT(15)
+#define PORT_STATUS_MY_PAUSE BIT(14)
+#define PORT_STATUS_FC (PORT_STATUS_MY_PAUSE | PORT_STATUS_PAUSE_EN)
+#define PORT_STATUS_RESOLVED BIT(13)
+#define PORT_STATUS_LINK BIT(12)
+#define PORT_STATUS_PORTMODE BIT(11)
+#define PORT_STATUS_PHYMODE BIT(10)
+#define PORT_STATUS_DUPLEX BIT(9)
+#define PORT_STATUS_SPEED BIT(8)
+#define PORT_SWITCH_ID 0x03
+#define PORT_SWITCH_ID_6060 0x0600
+#define PORT_SWITCH_ID_6060_MASK 0xfff0
+#define PORT_SWITCH_ID_6060_R1 0x0601
+#define PORT_SWITCH_ID_6060_R2 0x0602
+#define PORT_CONTROL 0x04
+#define PORT_CONTROL_FORCE_FLOW_CTRL BIT(15)
+#define PORT_CONTROL_TRAILER BIT(14)
+#define PORT_CONTROL_HEADER BIT(11)
+#define PORT_CONTROL_INGRESS_MODE BIT(8)
+#define PORT_CONTROL_VLAN_TUNNEL BIT(7)
+#define PORT_CONTROL_STATE_MASK 0x03
+#define PORT_CONTROL_STATE_DISABLED 0x00
+#define PORT_CONTROL_STATE_BLOCKING 0x01
+#define PORT_CONTROL_STATE_LEARNING 0x02
+#define PORT_CONTROL_STATE_FORWARDING 0x03
+#define PORT_VLAN_MAP 0x06
+#define PORT_VLAN_MAP_DBNUM_SHIFT 12
+#define PORT_VLAN_MAP_TABLE_MASK 0x1f
+#define PORT_ASSOC_VECTOR 0x0b
+#define PORT_ASSOC_VECTOR_MONITOR BIT(15)
+#define PORT_ASSOC_VECTOR_PAV_MASK 0x1f
+#define PORT_RX_CNTR 0x10
+#define PORT_TX_CNTR 0x11
+
+#define REG_GLOBAL 0x0f
+#define GLOBAL_STATUS 0x00
+#define GLOBAL_STATUS_SW_MODE_MASK (0x3 << 12)
+#define GLOBAL_STATUS_SW_MODE_0 (0x0 << 12)
+#define GLOBAL_STATUS_SW_MODE_1 (0x1 << 12)
+#define GLOBAL_STATUS_SW_MODE_2 (0x2 << 12)
+#define GLOBAL_STATUS_SW_MODE_3 (0x3 << 12)
+#define GLOBAL_STATUS_INIT_READY BIT(11)
+#define GLOBAL_STATUS_ATU_FULL BIT(3)
+#define GLOBAL_STATUS_ATU_DONE BIT(2)
+#define GLOBAL_STATUS_PHY_INT BIT(1)
+#define GLOBAL_STATUS_EEINT BIT(0)
+#define GLOBAL_MAC_01 0x01
+#define GLOBAL_MAC_01_DIFF_ADDR BIT(8)
+#define GLOBAL_MAC_23 0x02
+#define GLOBAL_MAC_45 0x03
+#define GLOBAL_CONTROL 0x04
+#define GLOBAL_CONTROL_DISCARD_EXCESS BIT(13)
+#define GLOBAL_CONTROL_MAX_FRAME_1536 BIT(10)
+#define GLOBAL_CONTROL_RELOAD_EEPROM BIT(9)
+#define GLOBAL_CONTROL_CTRMODE BIT(8)
+#define GLOBAL_CONTROL_ATU_FULL_EN BIT(3)
+#define GLOBAL_CONTROL_ATU_DONE_EN BIT(2)
+#define GLOBAL_CONTROL_PHYINT_EN BIT(1)
+#define GLOBAL_CONTROL_EEPROM_DONE_EN BIT(0)
+#define GLOBAL_ATU_CONTROL 0x0a
+#define GLOBAL_ATU_CONTROL_SWRESET BIT(15)
+#define GLOBAL_ATU_CONTROL_LEARNDIS BIT(14)
+#define GLOBAL_ATU_CONTROL_ATUSIZE_256 (0x0 << 12)
+#define GLOBAL_ATU_CONTROL_ATUSIZE_512 (0x1 << 12)
+#define GLOBAL_ATU_CONTROL_ATUSIZE_1024 (0x2 << 12)
+#define GLOBAL_ATU_CONTROL_ATE_AGE_SHIFT 4
+#define GLOBAL_ATU_CONTROL_ATE_AGE_MASK (0xff << 4)
+#define GLOBAL_ATU_CONTROL_ATE_AGE_5MIN (0x13 << 4)
+#define GLOBAL_ATU_OP 0x0b
+#define GLOBAL_ATU_OP_BUSY BIT(15)
+#define GLOBAL_ATU_OP_NOP (0 << 12)
+#define GLOBAL_ATU_OP_FLUSH_ALL ((1 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_FLUSH_UNLOCKED ((2 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_LOAD_DB ((3 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_GET_NEXT_DB ((4 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_FLUSH_DB ((5 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_OP_FLUSH_UNLOCKED_DB ((6 << 12) | GLOBAL_ATU_OP_BUSY)
+#define GLOBAL_ATU_DATA 0x0c
+#define GLOBAL_ATU_DATA_PORT_VECTOR_MASK 0x3f0
+#define GLOBAL_ATU_DATA_PORT_VECTOR_SHIFT 4
+#define GLOBAL_ATU_DATA_STATE_MASK 0x0f
+#define GLOBAL_ATU_DATA_STATE_UNUSED 0x00
+#define GLOBAL_ATU_DATA_STATE_UC_STATIC 0x0e
+#define GLOBAL_ATU_DATA_STATE_UC_LOCKED 0x0f
+#define GLOBAL_ATU_DATA_STATE_MC_STATIC 0x07
+#define GLOBAL_ATU_DATA_STATE_MC_LOCKED 0x0e
+#define GLOBAL_ATU_MAC_01 0x0d
+#define GLOBAL_ATU_MAC_23 0x0e
+#define GLOBAL_ATU_MAC_45 0x0f
+
+#endif
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists