netdev - Re: [PATCH net-next 7/9] net: dsa: mv88e6xxx: restore VLANTable map control

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <56D0D606.2010605@elecsyscorp.com>
Date:	Fri, 26 Feb 2016 22:47:38 +0000
From:	Kevin Smith <kevin.smith@...csyscorp.com>
To:	Andrew Lunn <andrew@...n.ch>
CC:	Vivien Didelot <vivien.didelot@...oirfairelinux.com>,
	"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"kernel@...oirfairelinux.com" <kernel@...oirfairelinux.com>,
	"David S. Miller" <davem@...emloft.net>,
	Florian Fainelli <f.fainelli@...il.com>,
	Sergei Shtylyov <sergei.shtylyov@...entembedded.com>,
	Guenter Roeck <linux@...ck-us.net>,
	Neil Armstrong <narmstrong@...libre.com>,
	Sascha Hauer <s.hauer@...gutronix.de>,
	Russell King <rmk+kernel@....linux.org.uk>
Subject: Re: [PATCH net-next 7/9] net: dsa: mv88e6xxx: restore VLANTable map
 control

Hi Andrew,

On 02/26/2016 04:35 PM, Andrew Lunn wrote:
> On Fri, Feb 26, 2016 at 10:12:28PM +0000, Kevin Smith wrote:
>> Hi Vivien, Andrew,
>>
>> On 02/26/2016 03:37 PM, Vivien Didelot wrote:
>>> Here, 5 is the CPU port and 6 is a DSA port.
>>>
>>> After joining ports 0, 1, 2 in the same bridge, we end up with:
>>>
>>> Port  0  1  2  3  4  5  6
>>>     0   -  *  *  -  -  *  *
>>>     1   *  -  *  -  -  *  *
>>>     2   *  *  -  -  -  *  *
>>>     3   -  -  -  -  -  *  *
>>>     4   -  -  -  -  -  *  *
>>>     5   *  *  *  *  *  -  *
>>>     6   *  *  *  *  *  *  -
>> The case I am concerned about is if the switch connected over DSA in
>> this example has a WAN port on it, which can legitimately route to the
>> CPU on port 5 but should not route to the LAN ports 0, 1, and 2.  Does
>> this VLAN allow direct communication between the WAN and LAN?  Or is
>> this prevented by DSA or some other mechanism?
> A typical WIFI access point with a connection to a cable modem.
>
> So in linux you have interfaces like
>
> lan0, lan1, lan2, lan3, wan0
>
> DSA provides you these interface. And by default they are all
> separated. There is no path between them. You can consider them as
> being separate physical ethernet cards, just like all other interfaces
> in linux.
>
> What you would typically do is:
>
> brctl addbr br0
> brctl addif br0 lan0
> brctl addif br0 lan1
> brctl addif br0 lan2
> brctl addif br0 lan3
>
> to create a bridge between the lan ports. The linux kernel will then
> push this bridge configuration down into the hardware, so the switch
> can forward frames between these ports.
>
> The wan port is not part of the bridge, so there is no L2 path to the
> WAN port. You need to do IP routing on the CPU.
>
> Linux takes the stance that switch ports interfaces should act just
> like any other linux interface and you configure them in the normal
> linux way.
>
>      Andrew

Thanks for the explanation.  I am a bit befuddled by the combination of 
all the possible configurations of the switch and how they interact with 
Linux.  :)  I think I understand what is happening now.

Kevin