[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAHsu+b-t_r93XKLJTUcin6xjhOrFVn3_60vwHkbRt3iHK28CbA@mail.gmail.com>
Date: Fri, 20 May 2016 07:44:06 +0200
From: Andre Heider <a.heider@...il.com>
To: Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...com>
Cc: Bert Lindner <bert@....net>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Robin Murphy <robin.murphy@....com>,
Andreas Färber <afaerber@...e.de>,
Marc Zyngier <marc.zyngier@....com>,
linux-arm-kernel@...ts.infradead.org,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
linux-sunxi@...glegroups.com
Subject: Re: 4.5.0 on sun7i-a20-olinuxino-lime2: libphy: PHY stmmac-0:ffffffff
not found (regression from rc7)
Giuseppe, Alexandre, et al.,
On Thu, Mar 17, 2016 at 8:52 AM, Marc Zyngier <marc.zyngier@....com> wrote:
> On Thu, 17 Mar 2016 00:56:40 +0100
> Bert Lindner <bert@....net> wrote:
>> On 2016-03-16 18:42, Marc Zyngier wrote:
>> > On 16/03/16 15:10, Bert Lindner wrote:
>> >> On 2016-03-16 14:10, Andreas Färber wrote:
>> >>> Am 16.03.2016 um 13:09 schrieb Robin Murphy:
>> >>>> On 16/03/16 11:39, Marc Zyngier wrote:
>> >>>>> On 16/03/16 11:19, Bert Lindner wrote:
...
>> >>>>>> For the board sun7i-a20-olinuxino-lime2, there seems to be a problem
>> >>>>>> with the eth0 PHY in mainline kernel 4.5.0 that developed since
>> >>>>>> 4.5.0-rc7. Ethernet does not work, although eth0 is reported:
...
>> >>>>>> [ 9.767125] NET: Registered protocol family 10
>> >>>>>> [ 10.357405] libphy: PHY stmmac-0:ffffffff not found
>> >>>>>> [ 10.362382] eth0: Could not attach to PHY
>> >>>>>> [ 10.366557] stmmac_open: Cannot attach to PHY (error: -19)
...
>> >>> v4 fixes for 4.5 are here:
>> >>>
>> >>> https://patchwork.ozlabs.org/patch/598195/ (revert)
>> >>> https://patchwork.ozlabs.org/patch/598196/
...
>> > Good to know, thanks. Could you also give the potential fix a go (as
>> > mentioned by Andreas)? Just to make sure that whatever gets merged next
>> > will actually fix the issue.
>>
>> Yes sure, it took a while because I had to travel. Confirmed, the
>> v4-for-4.5 fix works well for me, on sun7i-a20-olinuxino-lime2:
>>
>> root@...e2-079f:~# cat /proc/version
>> Linux version 4.5.0-598195-598196-v4 (root@...e2-079f) (gcc version
>> 4.9.1 (Ubuntu/Linaro 4.9.1-16ubuntu6) ) #1 SMP Wed Mar 16 16:44:22 UTC 2016
>>
>> dmesg:
>> [ 8.245273] NET: Registered protocol family 10
>> [ 9.297406] RX IPC Checksum Offload disabled
>> [ 9.297460] No MAC Management Counters available
>> [ 9.297951] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>> [ 16.285658] sun7i-dwmac 1c50000.ethernet eth0: Link is Up -
>> 1Gbps/Full - flow control rx/tx
>> [ 16.285798] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>>
>> The board is connected to my laptop rather than to a switch, so that
>> might be where the flow control message comes from (not sure). Anyway
>> ethernet works.
>
> Cool, many thanks for taking the time to test and report.
>
> Hopefully Giuseppe will get this merged quickly enough in mainline, and
> it should then trickle into a 4.5-stable release (cc-ing stable on
> these patches would probably be a good idea, BTW).
stmmac is broken on at least Lime2, BananaPi and Cubieboard2 since
v4.5 [0], including all five stable releases :(
The v4.5 patches quoted above are already +4 weeks old, could we
please get them into stable?
Thanks!
Andre
[0] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=823493
Powered by blists - more mailing lists