| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20160616192157.20872.6800.stgit@localhost.localdomain>
Date: Thu, 16 Jun 2016 12:21:57 -0700
From: Alexander Duyck <aduyck@...antis.com>
To: netdev@...r.kernel.org, intel-wired-lan@...ts.osuosl.org
Cc: hannes@...hat.com, jesse@...nel.org, eugenia@...lanox.com,
jbenc@...hat.com, alexander.duyck@...il.com, saeedm@...lanox.com,
ariel.elior@...gic.com, tom@...bertland.com,
michael.chan@...adcom.com, Dept-GELinuxNICDev@...gic.com,
davem@...emloft.net
Subject: [net-next PATCH v3 08/17] fm10k: Replace ndo_add/del_vxlan_port
with ndo_add/del_udp_enc_port
This change replaces the network device operations for adding or removing a
VXLAN port with operations that are more generically defined to be used for
any UDP offload port but provide a type. As such by just adding a line to
verify that the offload type if VXLAN we can maintain the same
functionality.
Signed-off-by: Alexander Duyck <aduyck@...antis.com>
---
drivers/net/ethernet/intel/Kconfig | 11 -------
drivers/net/ethernet/intel/fm10k/fm10k_netdev.c | 36 +++++++++++++----------
2 files changed, 20 insertions(+), 27 deletions(-)
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index 714bd1014ddb..11fc5e8ea968 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -307,15 +307,4 @@ config FM10K
To compile this driver as a module, choose M here. The module
will be called fm10k. MSI-X interrupt support is required
-config FM10K_VXLAN
- bool "Virtual eXtensible Local Area Network Support"
- default n
- depends on FM10K && VXLAN && !(FM10K=y && VXLAN=m)
- ---help---
- This allows one to create VXLAN virtual interfaces that provide
- Layer 2 Networks over Layer 3 Networks. VXLAN is often used
- to tunnel virtual network infrastructure in virtualized environments.
- Say Y here if you want to use Virtual eXtensible Local Area Network
- (VXLAN) in the driver.
-
endif # NET_VENDOR_INTEL
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c b/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c
index 2a08d3f5b6df..d00cb193da9a 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c
@@ -20,9 +20,7 @@
#include "fm10k.h"
#include <linux/vmalloc.h>
-#ifdef CONFIG_FM10K_VXLAN
-#include <net/vxlan.h>
-#endif /* CONFIG_FM10K_VXLAN */
+#include <net/udp_tunnel.h>
/**
* fm10k_setup_tx_resources - allocate Tx resources (Descriptors)
@@ -436,6 +434,7 @@ static void fm10k_restore_vxlan_port(struct fm10k_intfc *interface)
* @netdev: network interface device structure
* @sa_family: Address family of new port
* @port: port number used for VXLAN
+ * @type: Enumerated value specifying udp encapsulation type
*
* This function is called when a new VXLAN interface has added a new port
* number to the range that is currently in use for VXLAN. The new port
@@ -444,18 +443,21 @@ static void fm10k_restore_vxlan_port(struct fm10k_intfc *interface)
* is always used as the VXLAN port number for offloads.
**/
static void fm10k_add_vxlan_port(struct net_device *dev,
- sa_family_t sa_family, __be16 port) {
+ struct udp_tunnel_info *ti)
+{
struct fm10k_intfc *interface = netdev_priv(dev);
struct fm10k_vxlan_port *vxlan_port;
+ if (ti->type != UDP_TUNNEL_TYPE_VXLAN)
+ return;
/* only the PF supports configuring tunnels */
if (interface->hw.mac.type != fm10k_mac_pf)
return;
/* existing ports are pulled out so our new entry is always last */
fm10k_vxlan_port_for_each(vxlan_port, interface) {
- if ((vxlan_port->port == port) &&
- (vxlan_port->sa_family == sa_family)) {
+ if ((vxlan_port->port == ti->port) &&
+ (vxlan_port->sa_family == ti->sa_family)) {
list_del(&vxlan_port->list);
goto insert_tail;
}
@@ -465,8 +467,8 @@ static void fm10k_add_vxlan_port(struct net_device *dev,
vxlan_port = kmalloc(sizeof(*vxlan_port), GFP_ATOMIC);
if (!vxlan_port)
return;
- vxlan_port->port = port;
- vxlan_port->sa_family = sa_family;
+ vxlan_port->port = ti->port;
+ vxlan_port->sa_family = ti->sa_family;
insert_tail:
/* add new port value to list */
@@ -480,6 +482,7 @@ insert_tail:
* @netdev: network interface device structure
* @sa_family: Address family of freed port
* @port: port number used for VXLAN
+ * @type: Enumerated value specifying udp encapsulation type
*
* This function is called when a new VXLAN interface has freed a port
* number from the range that is currently in use for VXLAN. The freed
@@ -487,17 +490,20 @@ insert_tail:
* the port number for offloads.
**/
static void fm10k_del_vxlan_port(struct net_device *dev,
- sa_family_t sa_family, __be16 port) {
+ struct udp_tunnel_info *ti)
+{
struct fm10k_intfc *interface = netdev_priv(dev);
struct fm10k_vxlan_port *vxlan_port;
+ if (ti->type != UDP_TUNNEL_TYPE_VXLAN)
+ return;
if (interface->hw.mac.type != fm10k_mac_pf)
return;
/* find the port in the list and free it */
fm10k_vxlan_port_for_each(vxlan_port, interface) {
- if ((vxlan_port->port == port) &&
- (vxlan_port->sa_family == sa_family)) {
+ if ((vxlan_port->port == ti->port) &&
+ (vxlan_port->sa_family == ti->sa_family)) {
list_del(&vxlan_port->list);
kfree(vxlan_port);
break;
@@ -553,10 +559,8 @@ int fm10k_open(struct net_device *netdev)
if (err)
goto err_set_queues;
-#ifdef CONFIG_FM10K_VXLAN
/* update VXLAN port configuration */
- vxlan_get_rx_port(netdev);
-#endif
+ udp_tunnel_get_rx_info(netdev);
fm10k_up(interface);
@@ -1375,8 +1379,8 @@ static const struct net_device_ops fm10k_netdev_ops = {
.ndo_set_vf_vlan = fm10k_ndo_set_vf_vlan,
.ndo_set_vf_rate = fm10k_ndo_set_vf_bw,
.ndo_get_vf_config = fm10k_ndo_get_vf_config,
- .ndo_add_vxlan_port = fm10k_add_vxlan_port,
- .ndo_del_vxlan_port = fm10k_del_vxlan_port,
+ .ndo_udp_tunnel_add = fm10k_add_vxlan_port,
+ .ndo_udp_tunnel_del = fm10k_del_vxlan_port,
.ndo_dfwd_add_station = fm10k_dfwd_add_station,
.ndo_dfwd_del_station = fm10k_dfwd_del_station,
#ifdef CONFIG_NET_POLL_CONTROLLER
Powered by blists - more mailing lists