[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20160616192206.20872.41944.stgit@localhost.localdomain>
Date: Thu, 16 Jun 2016 12:22:06 -0700
From: Alexander Duyck <aduyck@...antis.com>
To: netdev@...r.kernel.org, intel-wired-lan@...ts.osuosl.org
Cc: hannes@...hat.com, jesse@...nel.org, eugenia@...lanox.com,
jbenc@...hat.com, alexander.duyck@...il.com, saeedm@...lanox.com,
ariel.elior@...gic.com, tom@...bertland.com,
michael.chan@...adcom.com, Dept-GELinuxNICDev@...gic.com,
davem@...emloft.net
Subject: [net-next PATCH v3 09/17] i40e: Move all UDP port notifiers to
single function
This patch goes through and combines the notifiers for VXLAN and GENEVE
into a single function for each action. So there is now one combined
function for getting ports, one for adding the ports, and one for deleting
the ports.
Signed-off-by: Alexander Duyck <aduyck@...antis.com>
---
drivers/net/ethernet/intel/Kconfig | 21 ---
drivers/net/ethernet/intel/i40e/i40e_main.c | 186 +++++++--------------------
2 files changed, 51 insertions(+), 156 deletions(-)
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index 11fc5e8ea968..1fbf9088a4d7 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -236,27 +236,6 @@ config I40E
To compile this driver as a module, choose M here. The module
will be called i40e.
-config I40E_VXLAN
- bool "Virtual eXtensible Local Area Network Support"
- default n
- depends on I40E && VXLAN && !(I40E=y && VXLAN=m)
- ---help---
- This allows one to create VXLAN virtual interfaces that provide
- Layer 2 Networks over Layer 3 Networks. VXLAN is often used
- to tunnel virtual network infrastructure in virtualized environments.
- Say Y here if you want to use Virtual eXtensible Local Area Network
- (VXLAN) in the driver.
-
-config I40E_GENEVE
- bool "Generic Network Virtualization Encapsulation (GENEVE) Support"
- depends on I40E && GENEVE && !(I40E=y && GENEVE=m)
- default n
- ---help---
- This allows one to create GENEVE virtual interfaces that provide
- Layer 2 Networks over Layer 3 Networks. GENEVE is often used
- to tunnel virtual network infrastructure in virtualized environments.
- Say Y here if you want to use GENEVE in the driver.
-
config I40E_DCB
bool "Data Center Bridging (DCB) Support"
default n
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 68172759bf71..2b1140563a64 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -31,12 +31,7 @@
/* Local includes */
#include "i40e.h"
#include "i40e_diag.h"
-#if IS_ENABLED(CONFIG_VXLAN)
-#include <net/vxlan.h>
-#endif
-#if IS_ENABLED(CONFIG_GENEVE)
-#include <net/geneve.h>
-#endif
+#include <net/udp_tunnel.h>
const char i40e_driver_name[] = "i40e";
static const char i40e_driver_string[] =
@@ -5367,14 +5362,7 @@ int i40e_open(struct net_device *netdev)
TCP_FLAG_CWR) >> 16);
wr32(&pf->hw, I40E_GLLAN_TSOMSK_L, be32_to_cpu(TCP_FLAG_CWR) >> 16);
-#ifdef CONFIG_I40E_VXLAN
- vxlan_get_rx_port(netdev);
-#endif
-#ifdef CONFIG_I40E_GENEVE
- if (pf->flags & I40E_FLAG_GENEVE_OFFLOAD_CAPABLE)
- geneve_get_rx_port(netdev);
-#endif
-
+ udp_tunnel_get_rx_info(netdev);
i40e_notify_client_of_netdev_open(vsi);
return 0;
@@ -7083,7 +7071,6 @@ static void i40e_handle_mdd_event(struct i40e_pf *pf)
**/
static void i40e_sync_udp_filters_subtask(struct i40e_pf *pf)
{
-#if IS_ENABLED(CONFIG_VXLAN) || IS_ENABLED(CONFIG_GENEVE)
struct i40e_hw *hw = &pf->hw;
i40e_status ret;
__be16 port;
@@ -7118,7 +7105,6 @@ static void i40e_sync_udp_filters_subtask(struct i40e_pf *pf)
}
}
}
-#endif
}
/**
@@ -8658,7 +8644,6 @@ static int i40e_set_features(struct net_device *netdev,
return 0;
}
-#if IS_ENABLED(CONFIG_VXLAN) || IS_ENABLED(CONFIG_GENEVE)
/**
* i40e_get_udp_port_idx - Lookup a possibly offloaded for Rx UDP port
* @pf: board private structure
@@ -8678,21 +8663,18 @@ static u8 i40e_get_udp_port_idx(struct i40e_pf *pf, __be16 port)
return i;
}
-#endif
-
-#if IS_ENABLED(CONFIG_VXLAN)
/**
- * i40e_add_vxlan_port - Get notifications about VXLAN ports that come up
+ * i40e_udp_tunnel_add - Get notifications about UDP tunnel ports that come up
* @netdev: This physical port's netdev
- * @sa_family: Socket Family that VXLAN is notifying us about
- * @port: New UDP port number that VXLAN started listening to
+ * @ti: Tunnel endpoint information
**/
-static void i40e_add_vxlan_port(struct net_device *netdev,
- sa_family_t sa_family, __be16 port)
+static void i40e_udp_tunnel_add(struct net_device *netdev,
+ struct udp_tunnel_info *ti)
{
struct i40e_netdev_priv *np = netdev_priv(netdev);
struct i40e_vsi *vsi = np->vsi;
struct i40e_pf *pf = vsi->back;
+ __be16 port = ti->port;
u8 next_idx;
u8 idx;
@@ -8700,7 +8682,7 @@ static void i40e_add_vxlan_port(struct net_device *netdev,
/* Check if port already exists */
if (idx < I40E_MAX_PF_UDP_OFFLOAD_PORTS) {
- netdev_info(netdev, "vxlan port %d already offloaded\n",
+ netdev_info(netdev, "port %d already offloaded\n",
ntohs(port));
return;
}
@@ -8709,131 +8691,75 @@ static void i40e_add_vxlan_port(struct net_device *netdev,
next_idx = i40e_get_udp_port_idx(pf, 0);
if (next_idx == I40E_MAX_PF_UDP_OFFLOAD_PORTS) {
- netdev_info(netdev, "maximum number of vxlan UDP ports reached, not adding port %d\n",
- ntohs(port));
- return;
- }
-
- /* New port: add it and mark its index in the bitmap */
- pf->udp_ports[next_idx].index = port;
- pf->udp_ports[next_idx].type = I40E_AQC_TUNNEL_TYPE_VXLAN;
- pf->pending_udp_bitmap |= BIT_ULL(next_idx);
- pf->flags |= I40E_FLAG_UDP_FILTER_SYNC;
-}
-
-/**
- * i40e_del_vxlan_port - Get notifications about VXLAN ports that go away
- * @netdev: This physical port's netdev
- * @sa_family: Socket Family that VXLAN is notifying us about
- * @port: UDP port number that VXLAN stopped listening to
- **/
-static void i40e_del_vxlan_port(struct net_device *netdev,
- sa_family_t sa_family, __be16 port)
-{
- struct i40e_netdev_priv *np = netdev_priv(netdev);
- struct i40e_vsi *vsi = np->vsi;
- struct i40e_pf *pf = vsi->back;
- u8 idx;
-
- idx = i40e_get_udp_port_idx(pf, port);
-
- /* Check if port already exists */
- if (idx < I40E_MAX_PF_UDP_OFFLOAD_PORTS) {
- /* if port exists, set it to 0 (mark for deletion)
- * and make it pending
- */
- pf->udp_ports[idx].index = 0;
- pf->pending_udp_bitmap |= BIT_ULL(idx);
- pf->flags |= I40E_FLAG_UDP_FILTER_SYNC;
- } else {
- netdev_warn(netdev, "vxlan port %d was not found, not deleting\n",
- ntohs(port));
- }
-}
-#endif
-
-#if IS_ENABLED(CONFIG_GENEVE)
-/**
- * i40e_add_geneve_port - Get notifications about GENEVE ports that come up
- * @netdev: This physical port's netdev
- * @sa_family: Socket Family that GENEVE is notifying us about
- * @port: New UDP port number that GENEVE started listening to
- **/
-static void i40e_add_geneve_port(struct net_device *netdev,
- sa_family_t sa_family, __be16 port)
-{
- struct i40e_netdev_priv *np = netdev_priv(netdev);
- struct i40e_vsi *vsi = np->vsi;
- struct i40e_pf *pf = vsi->back;
- u8 next_idx;
- u8 idx;
-
- if (!(pf->flags & I40E_FLAG_GENEVE_OFFLOAD_CAPABLE))
- return;
-
- idx = i40e_get_udp_port_idx(pf, port);
-
- /* Check if port already exists */
- if (idx < I40E_MAX_PF_UDP_OFFLOAD_PORTS) {
- netdev_info(netdev, "udp port %d already offloaded\n",
+ netdev_info(netdev, "maximum number of offloaded UDP ports reached, not adding port %d\n",
ntohs(port));
return;
}
- /* Now check if there is space to add the new port */
- next_idx = i40e_get_udp_port_idx(pf, 0);
-
- if (next_idx == I40E_MAX_PF_UDP_OFFLOAD_PORTS) {
- netdev_info(netdev, "maximum number of UDP ports reached, not adding port %d\n",
- ntohs(port));
+ switch (ti->type) {
+ case UDP_TUNNEL_TYPE_VXLAN:
+ pf->udp_ports[next_idx].type = I40E_AQC_TUNNEL_TYPE_VXLAN;
+ break;
+ case UDP_TUNNEL_TYPE_GENEVE:
+ if (!(pf->flags & I40E_FLAG_GENEVE_OFFLOAD_CAPABLE))
+ return;
+ pf->udp_ports[next_idx].type = I40E_AQC_TUNNEL_TYPE_NGE;
+ break;
+ default:
return;
}
/* New port: add it and mark its index in the bitmap */
pf->udp_ports[next_idx].index = port;
- pf->udp_ports[next_idx].type = I40E_AQC_TUNNEL_TYPE_NGE;
pf->pending_udp_bitmap |= BIT_ULL(next_idx);
pf->flags |= I40E_FLAG_UDP_FILTER_SYNC;
-
- dev_info(&pf->pdev->dev, "adding geneve port %d\n", ntohs(port));
}
/**
- * i40e_del_geneve_port - Get notifications about GENEVE ports that go away
+ * i40e_udp_tunnel_del - Get notifications about UDP tunnel ports that go away
* @netdev: This physical port's netdev
- * @sa_family: Socket Family that GENEVE is notifying us about
- * @port: UDP port number that GENEVE stopped listening to
+ * @ti: Tunnel endpoint information
**/
-static void i40e_del_geneve_port(struct net_device *netdev,
- sa_family_t sa_family, __be16 port)
+static void i40e_udp_tunnel_del(struct net_device *netdev,
+ struct udp_tunnel_info *ti)
{
struct i40e_netdev_priv *np = netdev_priv(netdev);
struct i40e_vsi *vsi = np->vsi;
struct i40e_pf *pf = vsi->back;
+ __be16 port = ti->port;
u8 idx;
- if (!(pf->flags & I40E_FLAG_GENEVE_OFFLOAD_CAPABLE))
- return;
-
idx = i40e_get_udp_port_idx(pf, port);
/* Check if port already exists */
- if (idx < I40E_MAX_PF_UDP_OFFLOAD_PORTS) {
- /* if port exists, set it to 0 (mark for deletion)
- * and make it pending
- */
- pf->udp_ports[idx].index = 0;
- pf->pending_udp_bitmap |= BIT_ULL(idx);
- pf->flags |= I40E_FLAG_UDP_FILTER_SYNC;
+ if (idx >= I40E_MAX_PF_UDP_OFFLOAD_PORTS)
+ goto not_found;
- dev_info(&pf->pdev->dev, "deleting geneve port %d\n",
- ntohs(port));
- } else {
- netdev_warn(netdev, "geneve port %d was not found, not deleting\n",
- ntohs(port));
+ switch (ti->type) {
+ case UDP_TUNNEL_TYPE_VXLAN:
+ if (pf->udp_ports[idx].type != I40E_AQC_TUNNEL_TYPE_VXLAN)
+ goto not_found;
+ break;
+ case UDP_TUNNEL_TYPE_GENEVE:
+ if (pf->udp_ports[idx].type != I40E_AQC_TUNNEL_TYPE_NGE)
+ goto not_found;
+ break;
+ default:
+ goto not_found;
}
+
+ /* if port exists, set it to 0 (mark for deletion)
+ * and make it pending
+ */
+ pf->udp_ports[idx].index = 0;
+ pf->pending_udp_bitmap |= BIT_ULL(idx);
+ pf->flags |= I40E_FLAG_UDP_FILTER_SYNC;
+
+ return;
+not_found:
+ netdev_warn(netdev, "UDP port %d was not found, not deleting\n",
+ ntohs(port));
}
-#endif
static int i40e_get_phys_port_id(struct net_device *netdev,
struct netdev_phys_item_id *ppid)
@@ -9063,14 +8989,8 @@ static const struct net_device_ops i40e_netdev_ops = {
.ndo_set_vf_link_state = i40e_ndo_set_vf_link_state,
.ndo_set_vf_spoofchk = i40e_ndo_set_vf_spoofchk,
.ndo_set_vf_trust = i40e_ndo_set_vf_trust,
-#if IS_ENABLED(CONFIG_VXLAN)
- .ndo_add_vxlan_port = i40e_add_vxlan_port,
- .ndo_del_vxlan_port = i40e_del_vxlan_port,
-#endif
-#if IS_ENABLED(CONFIG_GENEVE)
- .ndo_add_geneve_port = i40e_add_geneve_port,
- .ndo_del_geneve_port = i40e_del_geneve_port,
-#endif
+ .ndo_udp_tunnel_add = i40e_udp_tunnel_add,
+ .ndo_udp_tunnel_del = i40e_udp_tunnel_del,
.ndo_get_phys_port_id = i40e_get_phys_port_id,
.ndo_fdb_add = i40e_ndo_fdb_add,
.ndo_features_check = i40e_features_check,
@@ -10719,12 +10639,8 @@ static void i40e_print_features(struct i40e_pf *pf)
}
if (pf->flags & I40E_FLAG_DCB_CAPABLE)
i += snprintf(&buf[i], REMAIN(i), " DCB");
-#if IS_ENABLED(CONFIG_VXLAN)
i += snprintf(&buf[i], REMAIN(i), " VxLAN");
-#endif
-#if IS_ENABLED(CONFIG_GENEVE)
i += snprintf(&buf[i], REMAIN(i), " Geneve");
-#endif
if (pf->flags & I40E_FLAG_PTP)
i += snprintf(&buf[i], REMAIN(i), " PTP");
#ifdef I40E_FCOE
Powered by blists - more mailing lists