netdev - Re: [RFC PATCH] net: macb: Add gmii2rgmii converter support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <5F581884-194F-46BD-98E4-A3DAE17A2A7C@gmail.com>
Date:	Sun, 19 Jun 2016 22:39:04 -0700
From:	Florian Fainelli <f.fainelli@...il.com>
To:	Kedareswara rao Appana <appana.durga.rao@...inx.com>,
	nicolas.ferre@...el.com, punnaia@...inx.com, harinik@...inx.com,
	anirudh@...inx.com, michals@...inx.com, appanad@...inx.com
CC:	netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
	Andrew Lunn <andrew@...n.ch>
Subject: Re: [RFC PATCH] net: macb: Add gmii2rgmii converter support

On June 19, 2016 10:27:17 PM MST, Kedareswara rao Appana <appana.durga.rao@...inx.com> wrote:
>This patch adds support for gmii2rgmii converter
>in the macb driver.
>
>The GMII to RGMII IP core provides the
>Reduced Gigabit Media Independent Interface
>(RGMII) between Ethernet physical media devices
>And the Gigabit Ethernet controller.
>This core can switch dynamically between the
>Three different speed modes of operation (10/100/1000 Mb/s).
>MDIO interface is used to set operating speed of Ethernet MAC.
>
>Signed-off-by: Kedareswara rao Appana <appanad@...inx.com>
>---
>--> Tried to include this Coverter support in the
>PHY layer but it won't fit into the PHY framework as the
>coverter won't have vaild vendor/Device id registers.
>--> The Converter has only one register (16) that need's
>to be programmed with the external phy negotiated speed.
>--> The converter won't follow the Standard MII(ieee 802.3 clause 22).
>--> Will appreciate if someone can help on adding this coverter support

With the fixed PHY emulated PHY and registering a link_update callback (see drivers/net/dsa/bcm_sf2.c for an example), you could read specific registers which indicates link parameters and update the PHY device with these. 

How exactly is this converter working?

-- 
Florian