lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1474023554-24520-1-git-send-email-vkuznets@redhat.com>
Date:   Fri, 16 Sep 2016 12:59:14 +0200
From:   Vitaly Kuznetsov <vkuznets@...hat.com>
To:     netdev@...r.kernel.org
Cc:     linux-kernel@...r.kernel.org,
        Patrick Talbert <ptalbert@...hat.com>,
        Boris Ostrovsky <boris.ostrovsky@...cle.com>,
        David Vrabel <david.vrabel@...rix.com>,
        Juergen Gross <jgross@...e.com>, xen-devel@...ts.xenproject.org
Subject: [PATCH net-next RESEND] xen-netfront: avoid packet loss when ethernet header crosses page boundary

Small packet loss is reported on complex multi host network configurations
including tunnels, NAT, ... My investigation led me to the following check
in netback which drops packets:

        if (unlikely(txreq.size < ETH_HLEN)) {
                netdev_err(queue->vif->dev,
                           "Bad packet size: %d\n", txreq.size);
                xenvif_tx_err(queue, &txreq, extra_count, idx);
                break;
        }

But this check itself is legitimate. SKBs consist of a linear part (which
has to have the ethernet header) and (optionally) a number of frags.
Netfront transmits the head of the linear part up to the page boundary
as the first request and all the rest becomes frags so when we're
reconstructing the SKB in netback we can't distinguish between original
frags and the 'tail' of the linear part. The first SKB needs to be at
least ETH_HLEN size. So in case we have an SKB with its linear part
starting too close to the page boundary the packet is lost.

I see two ways to fix the issue:
- Change the 'wire' protocol between netfront and netback to start keeping
  the original SKB structure. We'll have to add a flag indicating the fact
  that the particular request is a part of the original linear part and not
  a frag. We'll need to know the length of the linear part to pre-allocate
  memory.
- Avoid transmitting SKBs with linear parts starting too close to the page
  boundary. That seems preferable short-term and shouldn't bring
  significant performance degradation as such packets are rare. That's what
  this patch is trying to achieve with skb_copy().

Signed-off-by: Vitaly Kuznetsov <vkuznets@...hat.com>
Acked-by: David Vrabel <david.vrabel@...rix.com>
---
- This is just a RESEND with David's ACK added.
---
 drivers/net/xen-netfront.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 96ccd4e..28c4a66 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -565,6 +565,7 @@ static int xennet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	struct netfront_queue *queue = NULL;
 	unsigned int num_queues = dev->real_num_tx_queues;
 	u16 queue_index;
+	struct sk_buff *nskb;
 
 	/* Drop the packet if no queues are set up */
 	if (num_queues < 1)
@@ -595,6 +596,19 @@ static int xennet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	offset = offset_in_page(skb->data);
 	len = skb_headlen(skb);
 
+	/* The first req should be at least ETH_HLEN size or the packet will be
+	 * dropped by netback.
+	 */
+	if (unlikely(PAGE_SIZE - offset < ETH_HLEN)) {
+		nskb = skb_copy(skb, GFP_ATOMIC);
+		if (!nskb)
+			goto drop;
+		dev_kfree_skb_any(skb);
+		skb = nskb;
+		page = virt_to_page(skb->data);
+		offset = offset_in_page(skb->data);
+	}
+
 	spin_lock_irqsave(&queue->tx_lock, flags);
 
 	if (unlikely(!netif_carrier_ok(dev) ||
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ