[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1476472475-12104-1-git-send-email-timur@codeaurora.org>
Date: Fri, 14 Oct 2016 14:14:35 -0500
From: Timur Tabi <timur@...eaurora.org>
To: netdev@...r.kernel.org
Subject: [PATCH] net: qcom/emac: disable interrupts before calling phy_disconnect
There is a race condition that can occur if EMAC interrupts are
enabled when phy_disconnect() is called. phy_disconnect() sets
adjust_link to NULL. When an interrupt occurs, the ISR might
call phy_mac_interrupt(), which wakes up the workqueue function
phy_state_machine(). This function might reference adjust_link,
thereby causing a null pointer exception.
Signed-off-by: Timur Tabi <timur@...eaurora.org>
---
drivers/net/ethernet/qualcomm/emac/emac-mac.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/qualcomm/emac/emac-mac.c b/drivers/net/ethernet/qualcomm/emac/emac-mac.c
index e97968e..6fb3bee 100644
--- a/drivers/net/ethernet/qualcomm/emac/emac-mac.c
+++ b/drivers/net/ethernet/qualcomm/emac/emac-mac.c
@@ -1021,14 +1021,18 @@ void emac_mac_down(struct emac_adapter *adpt)
napi_disable(&adpt->rx_q.napi);
phy_stop(adpt->phydev);
- phy_disconnect(adpt->phydev);
- /* disable mac irq */
+ /* Interrupts must be disabled before the PHY is disconnected, to
+ * avoid a race condition where adjust_link is null when we get
+ * an interrupt.
+ */
writel(DIS_INT, adpt->base + EMAC_INT_STATUS);
writel(0, adpt->base + EMAC_INT_MASK);
synchronize_irq(adpt->irq.irq);
free_irq(adpt->irq.irq, &adpt->irq);
+ phy_disconnect(adpt->phydev);
+
emac_mac_reset(adpt);
emac_tx_q_descs_free(adpt);
--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm
Technologies, Inc. Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.
Powered by blists - more mailing lists