| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <D42E83FD.34116%manish.rangankar@cavium.com>
Date: Thu, 20 Oct 2016 09:09:01 +0000
From: "Rangankar, Manish" <Manish.Rangankar@...ium.com>
To: Hannes Reinecke <hare@...e.de>,
"lduncan@...e.com" <lduncan@...e.com>,
"cleech@...hat.com" <cleech@...hat.com>
CC: "martin.petersen@...cle.com" <martin.petersen@...cle.com>,
"jejb@...ux.vnet.ibm.com" <jejb@...ux.vnet.ibm.com>,
"linux-scsi@...r.kernel.org" <linux-scsi@...r.kernel.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"Mintz, Yuval" <Yuval.Mintz@...ium.com>,
Dept-Eng QLogic Storage Upstream
<QLogic-Storage-Upstream@...ium.com>,
"Javali, Nilesh" <Nilesh.Javali@...ium.com>,
Adheer Chandravanshi <adheer.chandravanshi@...gic.com>,
"Dupuis, Chad" <Chad.Dupuis@...ium.com>,
"Kashyap, Saurav" <Saurav.Kashyap@...ium.com>,
"Easi, Arun" <Arun.Easi@...ium.com>
Subject: Re: [RFC 5/6] qedi: Add support for iSCSI session management.
On 19/10/16 1:33 PM, "Hannes Reinecke" <hare@...e.de> wrote:
>On 10/19/2016 07:01 AM, manish.rangankar@...ium.com wrote:
>> From: Manish Rangankar <manish.rangankar@...ium.com>
>>
>> This patch adds support for iscsi_transport LLD Login,
>> Logout, NOP-IN/NOP-OUT, Async, Reject PDU processing
>> and Firmware async event handling support.
>>
>> Signed-off-by: Nilesh Javali <nilesh.javali@...ium.com>
>> Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@...gic.com>
>> Signed-off-by: Chad Dupuis <chad.dupuis@...ium.com>
>> Signed-off-by: Saurav Kashyap <saurav.kashyap@...ium.com>
>> Signed-off-by: Arun Easi <arun.easi@...ium.com>
>> Signed-off-by: Manish Rangankar <manish.rangankar@...ium.com>
>> ---
>> drivers/scsi/qedi/qedi_fw.c | 1123 ++++++++++++++++++++++++++++
>> drivers/scsi/qedi/qedi_gbl.h | 67 ++
>> drivers/scsi/qedi/qedi_iscsi.c | 1604
>>++++++++++++++++++++++++++++++++++++++++
>> drivers/scsi/qedi/qedi_iscsi.h | 228 ++++++
>> drivers/scsi/qedi/qedi_main.c | 164 ++++
>> 5 files changed, 3186 insertions(+)
>> create mode 100644 drivers/scsi/qedi/qedi_fw.c
>> create mode 100644 drivers/scsi/qedi/qedi_gbl.h
>> create mode 100644 drivers/scsi/qedi/qedi_iscsi.c
>> create mode 100644 drivers/scsi/qedi/qedi_iscsi.h
>>
--snipped--
>>
>> +static void qedi_process_async_mesg(struct qedi_ctx *qedi,
>> + union iscsi_cqe *cqe,
>> + struct iscsi_task *task,
>> + struct qedi_conn *qedi_conn,
>> + u16 que_idx)
>> +{
>> + struct iscsi_conn *conn = qedi_conn->cls_conn->dd_data;
>> + struct iscsi_session *session = conn->session;
>> + struct iscsi_async_msg_hdr *cqe_async_msg;
>> + struct iscsi_async *resp_hdr;
>> + u32 scsi_lun[2];
>> + u32 pdu_len, num_bdqs;
>> + char bdq_data[QEDI_BDQ_BUF_SIZE];
>> + unsigned long flags;
>> +
>> + spin_lock_bh(&session->back_lock);
>> +
>> + cqe_async_msg = &cqe->cqe_common.iscsi_hdr.async_msg;
>> + pdu_len = cqe_async_msg->hdr_second_dword &
>> + ISCSI_ASYNC_MSG_HDR_DATA_SEG_LEN_MASK;
>> + num_bdqs = pdu_len / QEDI_BDQ_BUF_SIZE;
>> +
>> + if (cqe->cqe_common.cqe_type == ISCSI_CQE_TYPE_UNSOLICITED) {
>> + spin_lock_irqsave(&qedi->hba_lock, flags);
>> + qedi_unsol_pdu_adjust_bdq(qedi, &cqe->cqe_unsolicited,
>> + pdu_len, num_bdqs, bdq_data);
>> + spin_unlock_irqrestore(&qedi->hba_lock, flags);
>> + }
>> +
>> + resp_hdr = (struct iscsi_async *)&qedi_conn->gen_pdu.resp_hdr;
>> + memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
>> + resp_hdr->opcode = cqe_async_msg->opcode;
>> + resp_hdr->flags = 0x80;
>> +
>> + scsi_lun[0] = cpu_to_be32(cqe_async_msg->lun.lo);
>> + scsi_lun[1] = cpu_to_be32(cqe_async_msg->lun.hi);
>I _think_ we have a SCSI LUN structure ...
Will do.
--snipped--
>> +void qedi_process_iscsi_error(struct qedi_endpoint *ep, struct
>>async_data *data)
>> +{
>> + struct qedi_conn *qedi_conn;
>> + struct qedi_ctx *qedi;
>> + char warn_notice[] = "iscsi_warning";
>> + char error_notice[] = "iscsi_error";
>> + char *message;
>> + int need_recovery = 0;
>> + u32 err_mask = 0;
>> + char msg[64];
>> +
>> + if (!ep)
>> + return;
>> +
>> + qedi_conn = ep->conn;
>> + if (!qedi_conn)
>> + return;
>> +
>> + qedi = ep->qedi;
>> +
>> + QEDI_ERR(&qedi->dbg_ctx, "async event iscsi error:0x%x\n",
>> + data->error_code);
>> +
>> + if (err_mask) {
>> + need_recovery = 0;
>> + message = warn_notice;
>> + } else {
>> + need_recovery = 1;
>> + message = error_notice;
>> + }
>> +
>> + switch (data->error_code) {
>> + case ISCSI_STATUS_NONE:
>> + strcpy(msg, "tcp_error none");
>> + break;
>> + case ISCSI_CONN_ERROR_TASK_CID_MISMATCH:
>> + strcpy(msg, "task cid mismatch");
>> + break;
>> + case ISCSI_CONN_ERROR_TASK_NOT_VALID:
>> + strcpy(msg, "invalid task");
>> + break;
>> + case ISCSI_CONN_ERROR_RQ_RING_IS_FULL:
>> + strcpy(msg, "rq ring full");
>> + break;
>> + case ISCSI_CONN_ERROR_CMDQ_RING_IS_FULL:
>> + strcpy(msg, "cmdq ring full");
>> + break;
>> + case ISCSI_CONN_ERROR_HQE_CACHING_FAILED:
>> + strcpy(msg, "sge caching failed");
>> + break;
>> + case ISCSI_CONN_ERROR_HEADER_DIGEST_ERROR:
>> + strcpy(msg, "hdr digest error");
>> + break;
>> + case ISCSI_CONN_ERROR_LOCAL_COMPLETION_ERROR:
>> + strcpy(msg, "local cmpl error");
>> + break;
>> + case ISCSI_CONN_ERROR_DATA_OVERRUN:
>> + strcpy(msg, "invalid task");
>> + break;
>> + case ISCSI_CONN_ERROR_OUT_OF_SGES_ERROR:
>> + strcpy(msg, "out of sge error");
>> + break;
>> + case ISCSI_CONN_ERROR_TCP_SEG_PROC_IP_OPTIONS_ERROR:
>> + strcpy(msg, "tcp seg ip options error");
>> + break;
>> + case ISCSI_CONN_ERROR_TCP_IP_FRAGMENT_ERROR:
>> + strcpy(msg, "tcp ip fragment error");
>> + break;
>> + case ISCSI_CONN_ERROR_PROTOCOL_ERR_AHS_LEN:
>> + strcpy(msg, "AHS len protocol error");
>> + break;
>> + case ISCSI_CONN_ERROR_PROTOCOL_ERR_ITT_OUT_OF_RANGE:
>> + strcpy(msg, "itt out of range error");
>> + break;
>> + case ISCSI_CONN_ERROR_PROTOCOL_ERR_DATA_SEG_LEN_EXCEEDS_PDU_SIZE:
>> + strcpy(msg, "data seg more than pdu size");
>> + break;
>> + case ISCSI_CONN_ERROR_PROTOCOL_ERR_INVALID_OPCODE:
>> + strcpy(msg, "invalid opcode");
>> + break;
>> + case ISCSI_CONN_ERROR_PROTOCOL_ERR_INVALID_OPCODE_BEFORE_UPDATE:
>> + strcpy(msg, "invalid opcode before update");
>> + break;
>> + case ISCSI_CONN_ERROR_UNVALID_NOPIN_DSL:
>> + strcpy(msg, "unexpected opcode");
>> + break;
>> + case ISCSI_CONN_ERROR_PROTOCOL_ERR_R2T_CARRIES_NO_DATA:
>> + strcpy(msg, "r2t carries no data");
>> + break;
>> + case ISCSI_CONN_ERROR_PROTOCOL_ERR_DATA_SN:
>> + strcpy(msg, "data sn error");
>> + break;
>> + case ISCSI_CONN_ERROR_PROTOCOL_ERR_DATA_IN_TTT:
>> + strcpy(msg, "data TTT error");
>> + break;
>> + case ISCSI_CONN_ERROR_PROTOCOL_ERR_R2T_TTT:
>> + strcpy(msg, "r2t TTT error");
>> + break;
>> + case ISCSI_CONN_ERROR_PROTOCOL_ERR_R2T_BUFFER_OFFSET:
>> + strcpy(msg, "buffer offset error");
>> + break;
>> + case ISCSI_CONN_ERROR_PROTOCOL_ERR_BUFFER_OFFSET_OOO:
>> + strcpy(msg, "buffer offset ooo");
>> + break;
>> + case ISCSI_CONN_ERROR_PROTOCOL_ERR_R2T_SN:
>> + strcpy(msg, "data seg len 0");
>> + break;
>> + case ISCSI_CONN_ERROR_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_0:
>> + strcpy(msg, "data xer len error");
>> + break;
>> + case ISCSI_CONN_ERROR_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_1:
>> + strcpy(msg, "data xer len1 error");
>> + break;
>> + case ISCSI_CONN_ERROR_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_2:
>> + strcpy(msg, "data xer len2 error");
>> + break;
>> + case ISCSI_CONN_ERROR_PROTOCOL_ERR_LUN:
>> + strcpy(msg, "protocol lun error");
>> + break;
>> + case ISCSI_CONN_ERROR_PROTOCOL_ERR_F_BIT_ZERO:
>> + strcpy(msg, "f bit zero error");
>> + break;
>> + case ISCSI_CONN_ERROR_PROTOCOL_ERR_F_BIT_ZERO_S_BIT_ONE:
>> + strcpy(msg, "f bit zero s bit one error");
>> + break;
>> + case ISCSI_CONN_ERROR_PROTOCOL_ERR_EXP_STAT_SN:
>> + strcpy(msg, "exp stat sn error");
>> + break;
>> + case ISCSI_CONN_ERROR_PROTOCOL_ERR_DSL_NOT_ZERO:
>> + strcpy(msg, "dsl not zero error");
>> + break;
>> + case ISCSI_CONN_ERROR_PROTOCOL_ERR_INVALID_DSL:
>> + strcpy(msg, "invalid dsl");
>> + break;
>> + case ISCSI_CONN_ERROR_PROTOCOL_ERR_DATA_SEG_LEN_TOO_BIG:
>> + strcpy(msg, "data seg len too big");
>> + break;
>> + case ISCSI_CONN_ERROR_PROTOCOL_ERR_OUTSTANDING_R2T_COUNT:
>> + strcpy(msg, "outstanding r2t count error");
>> + break;
>> + case ISCSI_CONN_ERROR_SENSE_DATA_LENGTH:
>> + strcpy(msg, "sense datalen error");
>> + break;
>Please use an array for mapping values onto strings.
Will add this change in next revision.
Thanks,
Manish R.
Powered by blists - more mailing lists