netdev - Re: [PATCH v2 1/2] net: stmmac: Add OXNAS Glue Driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAGhQ9VyAaqUy06kb_Mxewo+BbJnxe=e6=x8pFsVSY0Z6C-h=cg@mail.gmail.com>
Date:   Mon, 31 Oct 2016 12:12:42 +0100
From:   Joachim Eastwood <manabian@...il.com>
To:     Neil Armstrong <narmstrong@...libre.com>
Cc:     "peppe.cavallaro" <peppe.cavallaro@...com>,
        alexandre.torgue@...com, netdev <netdev@...r.kernel.org>,
        linux-oxnas@...ts.tuxfamily.org,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 1/2] net: stmmac: Add OXNAS Glue Driver

Hi Neil,

On 31 October 2016 at 11:54, Neil Armstrong <narmstrong@...libre.com> wrote:
> Add Synopsys Designware MAC Glue layer for the Oxford Semiconductor OX820.
>
> Acked-by: Joachim Eastwood <manabian@...il.com>
> Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
> ---
> +static int oxnas_dwmac_init(struct oxnas_dwmac *dwmac)
> +{
> +       unsigned int value;
> +       int ret;
> +
> +       /* Reset HW here before changing the glue configuration */
> +       ret = device_reset(dwmac->dev);
> +       if (ret)
> +               return ret;
> +
> +       ret = clk_prepare_enable(dwmac->clk);
> +       if (ret)
> +               return ret;
> +
> +       ret = regmap_read(dwmac->regmap, OXNAS_DWMAC_CTRL_REGOFFSET, &value);
> +       if (ret < 0)
> +               return ret;

If regmap reading fails here, the clock will be left on as probe fails.


> +
> +       /* Enable GMII_GTXCLK to follow GMII_REFCLK, required for gigabit PHY */
> +       value |= BIT(DWMAC_CKEN_GTX)            |
> +                /* Use simple mux for 25/125 Mhz clock switching */
> +                BIT(DWMAC_SIMPLE_MUX)          |
> +                /* set auto switch tx clock source */
> +                BIT(DWMAC_AUTO_TX_SOURCE)      |
> +                /* enable tx & rx vardelay */
> +                BIT(DWMAC_CKEN_TX_OUT)         |
> +                BIT(DWMAC_CKEN_TXN_OUT)        |
> +                BIT(DWMAC_CKEN_TX_IN)          |
> +                BIT(DWMAC_CKEN_RX_OUT)         |
> +                BIT(DWMAC_CKEN_RXN_OUT)        |
> +                BIT(DWMAC_CKEN_RX_IN);
> +       regmap_write(dwmac->regmap, OXNAS_DWMAC_CTRL_REGOFFSET, value);
> +
> +       /* set tx & rx vardelay */
> +       value = DWMAC_TX_VARDELAY(4)    |
> +               DWMAC_TXN_VARDELAY(2)   |
> +               DWMAC_RX_VARDELAY(10)   |
> +               DWMAC_RXN_VARDELAY(8);
> +       regmap_write(dwmac->regmap, OXNAS_DWMAC_DELAY_REGOFFSET, value);
> +
> +       return 0;
> +}


regards,
Joachim Eastwood