[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAD=hENcE58xM4hBm-8N-eNREhBbP4gC-Vm89krQ6aj_8bDZmJg@mail.gmail.com>
Date: Wed, 7 Dec 2016 11:05:20 +0800
From: zhuyj <zyjzyj2000@...il.com>
To: Lino Sanfilippo <LinoSanfilippo@....de>
Cc: "e1000-devel@...ts.sourceforge.net"
<e1000-devel@...ts.sourceforge.net>,
netdev <netdev@...r.kernel.org>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>,
intel-wired-lan <intel-wired-lan@...ts.osuosl.org>
Subject: Re: [PATCH 1/1] ixgbe: write flush vfta registers
After several week tests, your advice still make this bug appear. But
my patch make this bug disappear.
Zhu Yanjun
On Thu, Nov 17, 2016 at 5:33 PM, zhuyj <zyjzyj2000@...il.com> wrote:
> Sure. From the following.
> "
> VLAN Filter. Each bit āiā in register ānā affects packets with VLAN
> tags equal to 32*n+i.
> 128 VLAN Filter registers compose a table of 4096 bits that cover all
> possible VLAN
> tags.
> Each bit when set, enables packets with the associated VLAN tags to
> pass. Each bit
> when cleared, blocks packets with this VLAN tag.
> "
> Your suggestions seems reasonable. Please wait. I will make tests to
> vefiry your suggestions.
>
> I will keep you update.
>
> On Wed, Nov 16, 2016 at 10:05 PM, Lino Sanfilippo <LinoSanfilippo@....de> wrote:
>>
>>
>> Hi,
>>
>>>
>>> Sometimes vfta registers can not be written successfully in dcb mode.
>>> This is very occassional. When the ixgbe nic runs for a very long time,
>>> sometimes this bug occurs. But after IXGBE_WRITE_FLUSH is executed,
>>> this bug never occurs.
>>>
>>> Signed-off-by: Zhu Yanjun <zyjzyj2000@...il.com>
>>> ---
>>> drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 5 ++++-
>>> 1 file changed, 4 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
>>> index bd93d82..1221cfb 100644
>>> --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
>>> +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
>>> @@ -4138,8 +4138,10 @@ static void ixgbe_vlan_promisc_enable(struct ixgbe_adapter *adapter)
>>> }
>>>
>>> /* Set all bits in the VLAN filter table array */
>>> - for (i = hw->mac.vft_size; i--;)
>>> + for (i = hw->mac.vft_size; i--;) {
>>> IXGBE_WRITE_REG(hw, IXGBE_VFTA(i), ~0U);
>>> + IXGBE_WRITE_FLUSH(hw);
>>> + }
>>
>> Should it not be sufficient to do the flush only once, at the end of the function?
>>
>> Regards,
>> Lino
Powered by blists - more mailing lists