lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <20170106.155312.809445938921144548.davem@davemloft.net>
Date:   Fri, 06 Jan 2017 15:53:12 -0500 (EST)
From:   David Miller <davem@...emloft.net>
To:     grygorii.strashko@...com
Cc:     f.fainelli@...il.com, netdev@...r.kernel.org, dmurphy@...com,
        mugunthanvnm@...com, nsekhar@...com, linux-kernel@...r.kernel.org,
        linux-omap@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH] net: phy: dp83867: fix irq generation

From: Grygorii Strashko <grygorii.strashko@...com>
Date: Thu, 5 Jan 2017 14:48:07 -0600

> For proper IRQ generation by DP83867 phy the INT/PWDN pin has to be
> programmed as an interrupt output instead of a Powerdown input in
> Configuration Register 3 (CFG3), Address 0x001E, bit 7 INT_OE = 1. The
> current driver doesn't do this and as result IRQs will not be generated by
> DP83867 phy even if they are properly configured in DT.
> 
> Hence, fix IRQ generation by properly configuring CFG3.INT_OE bit and
> ensure that Link Status Change (LINK_STATUS_CHNG_INT) and Auto-Negotiation
> Complete (AUTONEG_COMP_INT) interrupt are enabled. After this the DP83867
> driver will work properly in interrupt enabled mode.
> 
> Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>

Applied.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ