lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <87inp1zwlg.fsf@free-electrons.com>
Date:   Thu, 26 Jan 2017 16:09:47 +0100
From:   Gregory CLEMENT <gregory.clement@...e-electrons.com>
To:     Chris Packham <chris.packham@...iedtelesis.co.nz>
Cc:     linux-arm-kernel@...ts.infradead.org,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Jason Cooper <jason@...edaemon.net>,
        Andrew Lunn <andrew@...n.ch>,
        Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
        Russell King <linux@...linux.org.uk>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        netdev@...r.kernel.org
Subject: Re: [PATCHv3 4/5] arm: mvebu: Add device tree for 98DX3236 SoCs

Hi Chris,
 
 On ven., janv. 06 2017, Chris Packham <chris.packham@...iedtelesis.co.nz> wrote:

> The Marvell 98DX3236, 98DX3336, 98DX4521 and variants are switch ASICs
> with integrated CPUs. They are similar to the Armada XP SoCs but have
> different I/O interfaces.

Before sending a new version I have a few remarks:


> diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
> new file mode 100644
> index 000000000000..4b7b2fe3b682
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
> @@ -0,0 +1,254 @@
> +/*
> + * Device Tree Include file for Marvell 98dx3236 family SoC
> + *
> + * Copyright (C) 2016 Allied Telesis Labs
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.

There are few characters missing in the licence text, have a look on:
http://git.infradead.org/linux-mvebu.git/commitdiff/24f0b6fe52d21b5c59c4e948daae2234a39a25b2?hp=7ce7d89f48834cefece7804d38fc5d85382edf77



> + *
> + * Contains definitions specific to the 98dx3236 SoC that are not
> + * common to all Armada XP SoCs.
> + */
> +
> +#include "armada-xp.dtsi"
> +
> +/ {
> +	model = "Marvell 98DX3236 SoC";
> +	compatible = "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
> +
> +	aliases {
> +		gpio0 = &gpio0;
> +		gpio1 = &gpio1;
> +		gpio2 = &gpio2;
> +	};
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		enable-method = "marvell,98dx3236-smp";
> +
> +		cpu@0 {
> +			device_type = "cpu";
> +			compatible = "marvell,sheeva-v7";
> +			reg = <0>;
> +			clocks = <&cpuclk 0>;
> +			clock-latency = <1000000>;
> +		};
> +	};
> +
> +	soc {
> +		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
> +			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
> +			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
> +			  MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
> +			  MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
> +
> +		/*
> +		 * 98DX3236 has 1 x1 PCIe unit Gen2.0: One unit can be
The comment had been cut

> +		 */
> +		pcie-controller {

Please use a node label here as we have done in:

http://git.infradead.org/linux-mvebu.git/commitdiff/11f7135bb9dbe7ae3bb9a125e6123d4096a7e69e?hp=e72996b80d53b9b7616c8b68304ce4c422b4ddd1

Also use an address:
http://git.infradead.org/linux-mvebu.git/commitdiff/007d05d898050ffc70fd2737896528c5069f7269



> +			compatible = "marvell,armada-xp-pcie";
> +			status = "disabled";
> +			device_type = "pci";
> +
> +			#address-cells = <3>;
> +			#size-cells = <2>;
> +
> +			msi-parent = <&mpic>;
> +			bus-range = <0x00 0xff>;
> +
> +			ranges =
> +			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
> +				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
> +				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
> +				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */>;
> +
> +			pcie@1,0 {
node label

> +				device_type = "pci";
> +				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
> +				reg = <0x0800 0 0 0 0>;
> +				#address-cells = <3>;
> +				#size-cells = <2>;
> +				#interrupt-cells = <1>;
> +				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
> +					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
> +				interrupt-map-mask = <0 0 0 0>;
> +				interrupt-map = <0 0 0 0 &mpic 58>;
> +				marvell,pcie-port = <0>;
> +				marvell,pcie-lane = <0>;
> +				clocks = <&gateclk 5>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		internal-regs {
> +			coreclk: mvebu-sar@...30 {
> +				compatible = "marvell,mv98dx3236-core-clock";
> +			};
> +
> +			cpuclk: clock-complex@...00 {
> +				compatible = "marvell,mv98dx3236-cpu-clock";
> +			};
> +
> +			corediv-clock@...40 {
> +				status = "disabled";
> +			};
> +
> +			xor@...00 {
> +				status = "disabled";
> +			};
> +
> +			crypto@...00 {
> +				status = "disabled";
> +			};
> +
> +			xor@...00 {
> +				status = "disabled";
> +			};
> +
> +			xor@...00 {
> +				compatible = "marvell,orion-xor";
> +				reg = <0xf0800 0x100
> +				       0xf0a00 0x100>;
> +				clocks = <&gateclk 22>;
> +				status = "okay";
> +
> +				xor10 {
> +					interrupts = <51>;
> +					dmacap,memcpy;
> +					dmacap,xor;
> +				};
> +				xor11 {
> +					interrupts = <52>;
> +					dmacap,memcpy;
> +					dmacap,xor;
> +					dmacap,memset;
> +				};
> +			};
> +
> +			gpio0: gpio@...00 {
> +				compatible = "marvell,orion-gpio";
> +				reg = <0x18100 0x40>;
> +				ngpios = <32>;
> +				gpio-controller;
> +				#gpio-cells = <2>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				interrupts = <82>, <83>, <84>, <85>;
> +			};
> +
> +			/* does not exist */
> +			gpio1: gpio@...40 {
> +				compatible = "marvell,orion-gpio";
> +				reg = <0x18140 0x40>;
> +				status = "disabled";
> +			};
> +
> +			gpio2: gpio@...80 { /* rework some properties */
> +				compatible = "marvell,orion-gpio";
> +				reg = <0x18180 0x40>;
> +				ngpios = <1>; /* only gpio #32 */
> +				gpio-controller;
> +				#gpio-cells = <2>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				interrupts = <87>;
> +			};
> +
> +			nand: nand@...00 {
> +				clocks = <&dfx_coredivclk 0>;
> +			};
> +		};
> +
> +		dfx-registers {
node label

> +			compatible = "simple-bus";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
> +
> +                        dfx_coredivclk: corediv-clock@...68 {
> +                                compatible = "marvell,mv98dx3236-corediv-clock";
> +                                reg = <0xf8268 0xc>;
> +                                #clock-cells = <1>;
> +                                clocks = <&mainpll>;
> +                                clock-output-names = "nand";
> +                        };
> +
> +			dfx: dfx@0 {
> +				compatible = "marvell,dfx-server";
> +				reg = <0 0x100000>;
> +			};
> +		};
> +
> +		switch {
node label

> +			compatible = "simple-bus";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
> +
> +			pp0: packet-processor@0 {
> +				compatible = "marvell,prestera-98dx3236";
> +				reg = <0 0x4000000>;
> +				interrupts = <33>, <34>, <35>;
> +				dfx = <&dfx>;
> +			};
> +		};
> +	};
> +};
> +
> +&pinctrl {
> +	compatible = "marvell,98dx3236-pinctrl";
> +
> +	spi0_pins: spi0-pins {
> +		marvell,pins = "mpp0", "mpp1",
> +			       "mpp2", "mpp3";
> +		marvell,function = "spi0";
> +	};
> +};
> +
> +&sdio {
> +	status = "disabled";
> +};
> +
> +&crypto_sram0 {
> +	status = "disabled";
> +};
> +
> +&crypto_sram1 {
> +	status = "disabled";
> +};

same comments for the following device tree, in general you can refer to
this series:
http://lists.infradead.org/pipermail/linux-arm-kernel/2016-November/468585.html


> diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
> new file mode 100644
> index 000000000000..a9b0f47f8df9
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
> @@ -0,0 +1,76 @@
> +/*
> + * Device Tree Include file for Marvell 98dx3336 family SoC
> + *
> + * Copyright (C) 2016 Allied Telesis Labs
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + *
> + * Contains definitions specific to the 98dx3336 SoC that are not
> + * common to all Armada XP SoCs.
> + */
> +
> +#include "armada-xp-98dx3236.dtsi"
> +
> +/ {
> +	model = "Marvell 98DX3336 SoC";
> +	compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
> +
> +	cpus {
> +		cpu@1 {
> +			device_type = "cpu";
> +			compatible = "marvell,sheeva-v7";
> +			reg = <1>;
> +			clocks = <&cpuclk 1>;
> +			clock-latency = <1000000>;
> +		};
> +	};
> +
> +	soc {
> +		internal-regs {


Why the following node is not part of the dtsi?

Gregory

> +			resume@...80 {
> +				compatible = "marvell,98dx3336-resume-ctrl";
> +				reg = <0x20980 0x10>;
> +			};
> +		};
> +	};
> +};
> +
> +&pp0 {
> +	compatible = "marvell,prestera-98dx3336";
> +};
> diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
> new file mode 100644
> index 000000000000..446e6e65ec59
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
> @@ -0,0 +1,90 @@
> +/*
> + * Device Tree Include file for Marvell 98dx4521 family SoC
> + *
> + * Copyright (C) 2016 Allied Telesis Labs
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + *
> + * Contains definitions specific to the 98dx4521 SoC that are not
> + * common to all Armada XP SoCs.
> + */
> +
> +#include "armada-xp-98dx3236.dtsi"
> +
> +/ {
> +	model = "Marvell 98DX4251 SoC";
> +	compatible = "marvell,armadaxp-98dx4521", "marvell,armadaxp-98dx3236", "marvell,armadaxp", "marvell,armada-370-xp";
> +
> +	cpus {
> +		cpu@1 {
> +			device_type = "cpu";
> +			compatible = "marvell,sheeva-v7";
> +			reg = <1>;
> +			clocks = <&cpuclk 1>;
> +			clock-latency = <1000000>;
> +		};
> +	};
> +
> +	soc {
> +		internal-regs {
> +			resume@...80 {
> +				compatible = "marvell,98dx3336-resume-ctrl";
> +				reg = <0x20980 0x10>;
> +			};
> +		};
> +	};
> +};
> +
> +&sdio {
> +	status = "okay";
> +};
> +
> +&pinctrl {
> +	compatible = "marvell,98dx4251-pinctrl";
> +
> +	sdio_pins: sdio-pins {
> +		marvell,pins = "mpp5", "mpp6", "mpp7",
> +			       "mpp8", "mpp9", "mpp10";
> +		marvell,function = "sd0";
> +	};
> +};
> +
> +&pp0 {
> +	compatible = "marvell,prestera-98dx4251";
> +};
> -- 
> 2.11.0.24.ge6920cf
>

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ