[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170510091817.58f4e843@free-electrons.com>
Date: Wed, 10 May 2017 09:18:17 +0200
From: Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>
To: Giuseppe CAVALLARO <peppe.cavallaro@...com>
Cc: Corentin Labbe <clabbe.montjoie@...il.com>,
Alexandre Torgue <alexandre.torgue@...com>,
<netdev@...r.kernel.org>, <stable@...r.kernel.org>
Subject: Re: [PATCH] net: ethernet: stmmac: properly set PS bit in MII
configurations during reset
Hello,
On Wed, 10 May 2017 09:03:12 +0200, Giuseppe CAVALLARO wrote:
> > Please, read again my patch and the description of the problem that I
> > have sent. But basically, any solution that does not allow to set the
> > PS bit between asserting the DMA reset bit and polling for it to clear
> > will not work for MII PHYs.
>
> yes your point was clear to me, I was just wondering if we could find an
> easier way
> to solve it w/o changing the API, adding the set_ps and propagating the
> "interface"
> inside the DMA reset.
>
> Maybe this could be fixed in the glue-logic in some way. Let me know
> what do you think.
Well, it's more up to you to tell me how you would like this be solved.
We figured out what the problem was, but I don't know well enough the
architecture of the driver to decide how the solution to this problem
should be designed. I made an initial simple proposal to show what is
needed, but I'm definitely open to suggestions.
Best regards,
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Powered by blists - more mailing lists