lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-ID: <20170516190402.GA12628@Red> Date: Tue, 16 May 2017 21:04:02 +0200 From: Corentin Labbe <clabbe.montjoie@...il.com> To: Florian Fainelli <f.fainelli@...il.com> Cc: peppe.cavallaro@...com, alexandre.torgue@...com, netdev@...r.kernel.org, linux-kernel@...r.kernel.org Subject: Re: [PATCH 1/2] net-next: stmmac: add adjust_link function On Tue, May 16, 2017 at 09:43:04AM -0700, Florian Fainelli wrote: > On 05/15/2017 04:41 AM, Corentin Labbe wrote: > > My dwmac-sun8i serie will add some if (has_sun8i) to > > stmmac_adjust_link() > > Since the current stmmac_adjust_link() alreaady have lots of if (has_gmac/gmac4), > > It is now better to create an adjust_link() function for each dwmac. > > Is it really, because the diffstat really seems to indicate otherwise > and by looking at the code, I am definitively not convinced this is an > improvement other the current code. > > > > > So this patch add an adjust_link() function pointer, and move code out > > of stmmac_adjust_link to it. > > Can't we keep the existing adjust_link() function and just have a > different one for dwmac-sun8i that either re-uses portions of the > existing, or duplicate just what it needs? > I have done this work because the maintainer thinked it was a good idea (and so am I) See https://www.mail-archive.com/netdev@vger.kernel.org/msg167484.html You can see also the necessary modification of adjust_link for dwmac-sun8i here: http://lists.infradead.org/pipermail/linux-arm-kernel/2017-May/504034.html I agree that without dwmac-sun8i, this patch is near uncessary, but with it I add 4 "if (sun8i)". Anyway I will fix all problem you reported below. Thanks Regards > > > > Removing in the process stmmac_mac_flow_ctrl/stmmac_hw_fix_mac_speed > > since there not used anymore. > > > > Signed-off-by: Corentin Labbe <clabbe.montjoie@...il.com> > > --- > > drivers/net/ethernet/stmicro/stmmac/common.h | 3 + > > .../net/ethernet/stmicro/stmmac/dwmac1000_core.c | 54 ++++++++++++++ > > .../net/ethernet/stmicro/stmmac/dwmac100_core.c | 46 ++++++++++++ > > drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 54 ++++++++++++++ > > drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 83 +--------------------- > > 5 files changed, 158 insertions(+), 82 deletions(-) > > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h > > index b7ce3fbb5375..451c231006fe 100644 > > --- a/drivers/net/ethernet/stmicro/stmmac/common.h > > +++ b/drivers/net/ethernet/stmicro/stmmac/common.h > > @@ -469,11 +469,14 @@ struct stmmac_dma_ops { > > }; > > > > struct mac_device_info; > > +struct stmmac_priv; > > > > /* Helpers to program the MAC core */ > > struct stmmac_ops { > > /* MAC core initialization */ > > void (*core_init)(struct mac_device_info *hw, int mtu); > > + /* adjust link */ > > + int (*adjust_link)(struct stmmac_priv *priv); > > /* Enable the MAC RX/TX */ > > void (*set_mac)(void __iomem *ioaddr, bool enable); > > /* Enable and verify that the IPC module is supported */ > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c > > index f3d9305e5f70..5f3aace46c41 100644 > > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c > > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c > > @@ -26,6 +26,7 @@ > > #include <linux/slab.h> > > #include <linux/ethtool.h> > > #include <asm/io.h> > > +#include "stmmac.h" > > #include "stmmac_pcs.h" > > #include "dwmac1000.h" > > > > @@ -75,6 +76,58 @@ static void dwmac1000_core_init(struct mac_device_info *hw, int mtu) > > #endif > > } > > > > +static int dwmac1000_adjust_link(struct stmmac_priv *priv) > > +{ > > + struct net_device *ndev = priv->dev; > > + struct phy_device *phydev = ndev->phydev; > > + int new_state = 0; > > + u32 tx_cnt = priv->plat->tx_queues_to_use; > > + u32 ctrl; > > Reverse christmas tree declaration please. > > > + > > + ctrl = readl(priv->ioaddr + GMAC_CONTROL); > > + > > + if (phydev->duplex != priv->oldduplex) { > > + new_state = 1; > > bool new_state > > > + if (!(phydev->duplex)) > > Parenthesis not needed (this is an integer, not a bitmask) > > > + ctrl &= ~GMAC_CONTROL_DM; > > + else > > + ctrl |= GMAC_CONTROL_DM; > > + priv->oldduplex = phydev->duplex; > > + } > > + > > + if (phydev->pause) > > + priv->hw->mac->flow_ctrl(priv->hw, phydev->duplex, priv->flow_ctrl, > > + priv->pause, tx_cnt); > > + > > + if (phydev->speed != priv->speed) { > > + new_state = 1; > > + switch (phydev->speed) { > > + case 1000: > > case SPEED_1000 and so on? > > > + ctrl &= ~GMAC_CONTROL_PS; > > + break; > > + case 100: > > + ctrl |= GMAC_CONTROL_PS; > > + ctrl |= GMAC_CONTROL_FES; > > + break; > > + case 10: > > + ctrl |= GMAC_CONTROL_PS; > > + ctrl |= ~GMAC_CONTROL_FES; > > + break; > > + default: > > + netif_warn(priv, link, priv->dev, > > + "broken speed: %d\n", phydev->speed); > > + phydev->speed = SPEED_UNKNOWN; > > + break; > > + } > > + if (phydev->speed != SPEED_UNKNOWN && likely(priv->plat->fix_mac_speed)) > > + priv->plat->fix_mac_speed(priv->plat->bsp_priv, phydev->speed); > > + priv->speed = phydev->speed; > > + } > > + > > + writel(ctrl, priv->ioaddr + GMAC_CONTROL); > > + return new_state; > > +} > > + > > static int dwmac1000_rx_ipc_enable(struct mac_device_info *hw) > > { > > void __iomem *ioaddr = hw->pcsr; > > @@ -490,6 +543,7 @@ static void dwmac1000_debug(void __iomem *ioaddr, struct stmmac_extra_stats *x, > > > > static const struct stmmac_ops dwmac1000_ops = { > > .core_init = dwmac1000_core_init, > > + .adjust_link = dwmac1000_adjust_link, > > .set_mac = stmmac_set_mac, > > .rx_ipc = dwmac1000_rx_ipc_enable, > > .dump_regs = dwmac1000_dump_regs, > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c > > index 1b3609105484..ba3d46e65e1a 100644 > > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c > > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c > > @@ -27,6 +27,7 @@ > > #include <linux/crc32.h> > > #include <asm/io.h> > > #include "dwmac100.h" > > +#include "stmmac.h" > > > > static void dwmac100_core_init(struct mac_device_info *hw, int mtu) > > { > > @@ -40,6 +41,50 @@ static void dwmac100_core_init(struct mac_device_info *hw, int mtu) > > #endif > > } > > > > +static int dwmac100_adjust_link(struct stmmac_priv *priv) > > +{ > > + struct net_device *ndev = priv->dev; > > + struct phy_device *phydev = ndev->phydev; > > + int new_state = 0; > > + u32 tx_cnt = priv->plat->tx_queues_to_use; > > + u32 ctrl; > > + > > + ctrl = readl(priv->ioaddr + MAC_CTRL_REG); > > + if (phydev->duplex != priv->oldduplex) { > > + new_state = 1; > > + if (!(phydev->duplex)) > > + ctrl &= ~MAC_CONTROL_F; > > + else > > + ctrl |= MAC_CONTROL_F; > > + priv->oldduplex = phydev->duplex; > > + } > > + > > + if (phydev->pause) > > + priv->hw->mac->flow_ctrl(priv->hw, phydev->duplex, priv->flow_ctrl, > > + priv->pause, tx_cnt); > > + > > + if (phydev->speed != priv->speed) { > > + new_state = 1; > > + switch (phydev->speed) { > > + case 100: > > + case 10: > > + ctrl &= ~MAC_CONTROL_PS; > > + break; > > + default: > > + netif_warn(priv, link, priv->dev, > > + "broken speed: %d\n", phydev->speed); > > + phydev->speed = SPEED_UNKNOWN; > > + break; > > + } > > + if (phydev->speed != SPEED_UNKNOWN && likely(priv->plat->fix_mac_speed)) > > + priv->plat->fix_mac_speed(priv->plat->bsp_priv, phydev->speed); > > + priv->speed = phydev->speed; > > + } > > + > > + writel(ctrl, priv->ioaddr + MAC_CTRL_REG); > > + return new_state; > > +} > > + > > static void dwmac100_dump_mac_regs(struct mac_device_info *hw, u32 *reg_space) > > { > > void __iomem *ioaddr = hw->pcsr; > > @@ -150,6 +195,7 @@ static void dwmac100_pmt(struct mac_device_info *hw, unsigned long mode) > > > > static const struct stmmac_ops dwmac100_ops = { > > .core_init = dwmac100_core_init, > > + .adjust_link = dwmac100_adjust_link, > > .set_mac = stmmac_set_mac, > > .rx_ipc = dwmac100_rx_ipc_enable, > > .dump_regs = dwmac100_dump_mac_regs, > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c > > index 48793f2e9307..133b6bcd7b61 100644 > > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c > > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c > > @@ -19,6 +19,7 @@ > > #include <linux/io.h> > > #include "stmmac_pcs.h" > > #include "dwmac4.h" > > +#include "stmmac.h" > > > > static void dwmac4_core_init(struct mac_device_info *hw, int mtu) > > { > > @@ -59,6 +60,58 @@ static void dwmac4_core_init(struct mac_device_info *hw, int mtu) > > writel(value, ioaddr + GMAC_INT_EN); > > } > > > > +static int dwmac4_adjust_link(struct stmmac_priv *priv) > > +{ > > + struct net_device *ndev = priv->dev; > > + struct phy_device *phydev = ndev->phydev; > > + int new_state = 0; > > + u32 tx_cnt = priv->plat->tx_queues_to_use; > > + u32 ctrl; > > + > > + ctrl = readl(priv->ioaddr + MAC_CTRL_REG); > > + > > + if (phydev->duplex != priv->oldduplex) { > > + new_state = 1; > > + if (!(phydev->duplex)) > > + ctrl &= ~GMAC_CONFIG_DM; > > + else > > + ctrl |= GMAC_CONFIG_DM; > > + priv->oldduplex = phydev->duplex; > > + } > > + > > + if (phydev->pause) > > + priv->hw->mac->flow_ctrl(priv->hw, phydev->duplex, priv->flow_ctrl, > > + priv->pause, tx_cnt); > > + > > + if (phydev->speed != priv->speed) { > > + new_state = 1; > > + switch (phydev->speed) { > > + case 1000: > > + ctrl &= ~GMAC_CONFIG_PS; > > + break; > > + case 100: > > + ctrl |= GMAC_CONFIG_PS; > > + ctrl |= GMAC_CONFIG_FES; > > + break; > > + case 10: > > + ctrl |= GMAC_CONFIG_PS; > > + ctrl |= ~GMAC_CONFIG_FES; > > + break; > > + default: > > + netif_warn(priv, link, priv->dev, > > + "broken speed: %d\n", phydev->speed); > > + phydev->speed = SPEED_UNKNOWN; > > + break; > > + } > > + if (phydev->speed != SPEED_UNKNOWN && likely(priv->plat->fix_mac_speed)) > > + priv->plat->fix_mac_speed(priv->plat->bsp_priv, phydev->speed); > > + priv->speed = phydev->speed; > > + } > > + > > + writel(ctrl, priv->ioaddr + MAC_CTRL_REG); > > + return new_state; > > +} > > + > > static void dwmac4_rx_queue_enable(struct mac_device_info *hw, > > u8 mode, u32 queue) > > { > > @@ -669,6 +722,7 @@ static void dwmac4_debug(void __iomem *ioaddr, struct stmmac_extra_stats *x, > > > > static const struct stmmac_ops dwmac4_ops = { > > .core_init = dwmac4_core_init, > > + .adjust_link = dwmac4_adjust_link, > > .set_mac = stmmac_set_mac, > > .rx_ipc = dwmac4_rx_ipc_enable, > > .rx_queue_enable = dwmac4_rx_queue_enable, > > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > > index b05a042cf2c6..fb3e2ddaa7c9 100644 > > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > > @@ -286,21 +286,6 @@ static inline u32 stmmac_rx_dirty(struct stmmac_priv *priv, u32 queue) > > } > > > > /** > > - * stmmac_hw_fix_mac_speed - callback for speed selection > > - * @priv: driver private structure > > - * Description: on some platforms (e.g. ST), some HW system configuration > > - * registers have to be set according to the link speed negotiated. > > - */ > > -static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv) > > -{ > > - struct net_device *ndev = priv->dev; > > - struct phy_device *phydev = ndev->phydev; > > - > > - if (likely(priv->plat->fix_mac_speed)) > > - priv->plat->fix_mac_speed(priv->plat->bsp_priv, phydev->speed); > > -} > > - > > -/** > > * stmmac_enable_eee_mode - check and enter in LPI mode > > * @priv: driver private structure > > * Description: this function is to verify and enter in LPI mode in case of > > @@ -759,19 +744,6 @@ static void stmmac_release_ptp(struct stmmac_priv *priv) > > } > > > > /** > > - * stmmac_mac_flow_ctrl - Configure flow control in all queues > > - * @priv: driver private structure > > - * Description: It is used for configuring the flow control in all queues > > - */ > > -static void stmmac_mac_flow_ctrl(struct stmmac_priv *priv, u32 duplex) > > -{ > > - u32 tx_cnt = priv->plat->tx_queues_to_use; > > - > > - priv->hw->mac->flow_ctrl(priv->hw, duplex, priv->flow_ctrl, > > - priv->pause, tx_cnt); > > -} > > - > > -/** > > * stmmac_adjust_link - adjusts the link parameters > > * @dev: net device structure > > * Description: this is the helper called by the physical abstraction layer > > @@ -793,60 +765,7 @@ static void stmmac_adjust_link(struct net_device *dev) > > spin_lock_irqsave(&priv->lock, flags); > > > > if (phydev->link) { > > - u32 ctrl = readl(priv->ioaddr + MAC_CTRL_REG); > > - > > - /* Now we make sure that we can be in full duplex mode. > > - * If not, we operate in half-duplex mode. */ > > - if (phydev->duplex != priv->oldduplex) { > > - new_state = 1; > > - if (!(phydev->duplex)) > > - ctrl &= ~priv->hw->link.duplex; > > - else > > - ctrl |= priv->hw->link.duplex; > > - priv->oldduplex = phydev->duplex; > > - } > > - /* Flow Control operation */ > > - if (phydev->pause) > > - stmmac_mac_flow_ctrl(priv, phydev->duplex); > > - > > - if (phydev->speed != priv->speed) { > > - new_state = 1; > > - switch (phydev->speed) { > > - case 1000: > > - if (priv->plat->has_gmac || > > - priv->plat->has_gmac4) > > - ctrl &= ~priv->hw->link.port; > > - break; > > - case 100: > > - if (priv->plat->has_gmac || > > - priv->plat->has_gmac4) { > > - ctrl |= priv->hw->link.port; > > - ctrl |= priv->hw->link.speed; > > - } else { > > - ctrl &= ~priv->hw->link.port; > > - } > > - break; > > - case 10: > > - if (priv->plat->has_gmac || > > - priv->plat->has_gmac4) { > > - ctrl |= priv->hw->link.port; > > - ctrl &= ~(priv->hw->link.speed); > > - } else { > > - ctrl &= ~priv->hw->link.port; > > - } > > - break; > > - default: > > - netif_warn(priv, link, priv->dev, > > - "broken speed: %d\n", phydev->speed); > > - phydev->speed = SPEED_UNKNOWN; > > - break; > > - } > > - if (phydev->speed != SPEED_UNKNOWN) > > - stmmac_hw_fix_mac_speed(priv); > > - priv->speed = phydev->speed; > > - } > > - > > - writel(ctrl, priv->ioaddr + MAC_CTRL_REG); > > + new_state = priv->hw->mac->adjust_link(priv); > > > > if (!priv->oldlink) { > > new_state = 1; > > > > > -- > Florian
Powered by blists - more mailing lists