netdev - Re: [PATCH v8 net-next 00/17] net: qualcomm: add QCA7000 UART driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-Id: <20170530.140358.891038297917804466.davem@davemloft.net>
Date:   Tue, 30 May 2017 14:03:58 -0400 (EDT)
From:   David Miller <davem@...emloft.net>
To:     stefan.wahren@...e.com
Cc:     robh+dt@...nel.org, mark.rutland@....com,
        gregkh@...uxfoundation.org, jslaby@...e.com, LinoSanfilippo@....de,
        kubakici@...pl, devicetree@...r.kernel.org, netdev@...r.kernel.org,
        linux-serial@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v8 net-next 00/17] net: qualcomm: add QCA7000 UART
 driver

From: Stefan Wahren <stefan.wahren@...e.com>
Date: Mon, 29 May 2017 13:57:08 +0200

> The Qualcomm QCA7000 HomePlug GreenPHY supports two interfaces:
> UART and SPI. This patch series adds the missing support for UART.
> 
> This driver based on the Qualcomm code [1], but contains some changes:
> * use random MAC address per default
> * use net_device_stats from device
> * share frame decoding between SPI and UART driver
> * improve error handling
> * reimplement tty_wakeup with work queue (based on slcan)
> * use new serial device bus instead of ldisc
> 
> The patches 1 - 3 are just for clean up and are not related to
> the UART support. Patch 4 adds SET_NETDEV_DEV() to qca_spi.
> Patches 5 - 16 prepare the existing QCA7000 code for UART support.
> The last patch contains the new driver.
> 
> The code itself has been tested on a Freescale i.MX28 board and
> a Raspberry Pi Zero.

Series applied, thank you.