netdev - [PATCH net-next] cxgb4: FW upgrade fixes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1496147766-12948-1-git-send-email-ganeshgr@chelsio.com>
Date:   Tue, 30 May 2017 18:06:06 +0530
From:   Ganesh Goudar <ganeshgr@...lsio.com>
To:     netdev@...r.kernel.org, davem@...emloft.net
Cc:     nirranjan@...lsio.com, indranil@...lsio.com,
        Arjun Vynipadath <arjun@...lsio.com>,
        Casey Leedom <leedom@...lsio.com>,
        Ganesh Goudar <ganeshgr@...lsio.com>
Subject: [PATCH net-next] cxgb4: FW upgrade fixes

From: Arjun Vynipadath <arjun@...lsio.com>

Disable FW_OK flag while flashing Firmware. This will help to fix any
potential mailbox timeouts during Firmware flash.

Grab new devlog parameters after Firmware restart. When we FLASH new
Firmware onto an adapter, the new Firmware may have the Firmware Device Log
located at a different memory address or have a different size for it.

Signed-off-by: Arjun Vynipadath <arjun@...lsio.com>
Signed-off-by: Casey Leedom <leedom@...lsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@...lsio.com>
---
v2:
-Fix spelling mistake, "send" -> "sent"

 drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index b97ce4a..9160c88 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -6288,13 +6288,18 @@ int t4_fw_upgrade(struct adapter *adap, unsigned int mbox,
 	if (!t4_fw_matches_chip(adap, fw_hdr))
 		return -EINVAL;
 
+	/* Disable FW_OK flag so that mbox commands with FW_OK flag set
+	 * wont be sent when we are flashing FW.
+	 */
+	adap->flags &= ~FW_OK;
+
 	ret = t4_fw_halt(adap, mbox, force);
 	if (ret < 0 && !force)
-		return ret;
+		goto out;
 
 	ret = t4_load_fw(adap, fw_data, size);
 	if (ret < 0)
-		return ret;
+		goto out;
 
 	/*
 	 * Older versions of the firmware don't understand the new
@@ -6305,7 +6310,17 @@ int t4_fw_upgrade(struct adapter *adap, unsigned int mbox,
 	 * its header flags to see if it advertises the capability.
 	 */
 	reset = ((be32_to_cpu(fw_hdr->flags) & FW_HDR_FLAGS_RESET_HALT) == 0);
-	return t4_fw_restart(adap, mbox, reset);
+	ret = t4_fw_restart(adap, mbox, reset);
+
+	/* Grab potentially new Firmware Device Log parameters so we can see
+	 * how healthy the new Firmware is.  It's okay to contact the new
+	 * Firmware for these parameters even though, as far as it's
+	 * concerned, we've never said "HELLO" to it ...
+	 */
+	(void)t4_init_devlog_params(adap);
+out:
+	adap->flags |= FW_OK;
+	return ret;
 }
 
 /**
-- 
2.1.0