[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170602234042.22782-1-paul.burton@imgtec.com>
Date: Fri, 2 Jun 2017 16:40:35 -0700
From: Paul Burton <paul.burton@...tec.com>
To: <netdev@...r.kernel.org>
CC: Tobias Klauser <tklauser@...tanz.ch>,
"David S . Miller" <davem@...emloft.net>,
Jarod Wilson <jarod@...hat.com>, <linux-mips@...ux-mips.org>,
Eric Dumazet <edumazet@...gle.com>,
Paul Burton <paul.burton@...tec.com>
Subject: [PATCH v3 0/7] net: pch_gbe: Fixes & MIPS support
The Intel EG20T Platform Controller Hub is used on the MIPS Boston
development board to provide various peripherals including ethernet.
This series fixes some issues with the pch_gbe driver discovered whilst
in use on the Boston board, and implements support for device tree which
we use to provide the PHY reset GPIO.
Applies atop v4.12-rc3.
Paul Burton (7):
net: pch_gbe: Mark Minnow PHY reset GPIO active low
net: pch_gbe: Pull PHY GPIO handling out of Minnow code
dt-bindings: net: Document Intel pch_gbe binding
net: pch_gbe: Add device tree support
net: pch_gbe: Always reset PHY along with MAC
net: pch_gbe: Allow longer for resets
net: pch_gbe: Allow build on MIPS platforms
Documentation/devicetree/bindings/net/pch_gbe.txt | 25 +++++++
drivers/net/ethernet/oki-semi/pch_gbe/Kconfig | 2 +-
drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h | 4 +-
.../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 79 +++++++++++++++++-----
4 files changed, 91 insertions(+), 19 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/pch_gbe.txt
--
2.13.0
Powered by blists - more mailing lists