[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <87y3st5hum.fsf@free-electrons.com>
Date: Thu, 15 Jun 2017 18:35:45 +0200
From: Gregory CLEMENT <gregory.clement@...e-electrons.com>
To: Antoine Tenart <antoine.tenart@...e-electrons.com>
Cc: davem@...emloft.net, jason@...edaemon.net, andrew@...n.ch,
sebastian.hesselbarth@...il.com, f.fainelli@...il.com,
thomas.petazzoni@...e-electrons.com, nadavh@...vell.com,
mw@...ihalf.com, linux@...linux.org.uk, netdev@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH net-next v5 11/11] arm64: marvell: dts: add xmdio nodes for 7k/8k
Hi Antoine,
On jeu., juin 15 2017, Antoine Tenart <antoine.tenart@...e-electrons.com> wrote:
> Add the description of the xMDIO bus for the Marvell Armada 7k and
> Marvell Armada 8k; for both CP110 slave and master. This bus is found
> on Marvell Ethernet controllers and provides an interface with the
> xMDIO bus.
>
> Signed-off-by: Antoine Tenart <antoine.tenart@...e-electrons.com>
Applied on mvebu/dt64
Thanks,
Gregory
> ---
>
> @Dave: this patch should go through the mvebu tree as asked by Gregory, thanks!
>
> arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 8 ++++++++
> arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 8 ++++++++
> 2 files changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> index 576e825585c9..8b512b75aea9 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> @@ -97,6 +97,14 @@
> clocks = <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>;
> };
>
> + cpm_xmdio: mdio@...600 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "marvell,xmdio";
> + reg = <0x12a600 0x10>;
> + status = "disabled";
> + };
> +
> cpm_syscon0: system-controller@...000 {
> compatible = "marvell,cp110-system-controller0",
> "syscon";
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> index 797208a11f9d..bd0c0e03edd2 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> @@ -104,6 +104,14 @@
> clocks = <&cps_syscon0 1 9>, <&cps_syscon0 1 5>;
> };
>
> + cps_xmdio: mdio@...600 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "marvell,xmdio";
> + reg = <0x12a600 0x10>;
> + status = "disabled";
> + };
> +
> cps_syscon0: system-controller@...000 {
> compatible = "marvell,cp110-system-controller0",
> "syscon";
> --
> 2.9.4
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
Powered by blists - more mailing lists