| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1f8255c9-14c1-440f-0f0c-d173ed439d8d@rock-chips.com>
Date: Tue, 27 Jun 2017 22:21:24 +0800
From: "David.Wu" <david.wu@...k-chips.com>
To: Florian Fainelli <f.fainelli@...il.com>, davem@...emloft.net,
heiko@...ech.de, robh+dt@...nel.org, mark.rutland@....com,
catalin.marinas@....com, will.deacon@....com, olof@...om.net,
linux@...linux.org.uk, arnd@...db.de
Cc: andrew@...n.ch, peppe.cavallaro@...com, alexandre.torgue@...com,
huangtao@...k-chips.com, hwg@...k-chips.com,
netdev@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 05/11] net: stmmac: dwmac-rk: Add internal phy support
Hi Florian,
Sorry for reply late.
在 2017/6/24 0:22, Florian Fainelli 写道:
> On 06/22/2017 09:59 PM, David Wu wrote:
>> To make internal phy worked, need to configure the phy_clock,
>> phy cru_reset and related registers.
>>
>> Change-Id: I6971c0a769754b824b1b908b56080cbaf7867d13
>> Signed-off-by: David Wu <david.wu@...k-chips.com>
>> ---
>> .../devicetree/bindings/net/rockchip-dwmac.txt | 3 +
>> drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 82 ++++++++++++++++++++++
>> 2 files changed, 85 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
>> index 8f42755..0514f69 100644
>> --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
>> +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
>> @@ -22,6 +22,7 @@ Required properties:
>> <&cru SCLK_MACREF_OUT> clock gate for RMII reference clock output
>> <&cru ACLK_GMAC>: AXI clock gate for GMAC
>> <&cru PCLK_GMAC>: APB clock gate for GMAC
>> + <&cru MAC_PHY>: clock for internal macphy
>> - clock-names: One name for each entry in the clocks property.
>> - phy-mode: See ethernet.txt file in the same directory.
>> - pinctrl-names: Names corresponding to the numbered pinctrl states.
>> @@ -35,6 +36,8 @@ Required properties:
>> - assigned-clocks: main clock, should be <&cru SCLK_MAC>;
>> - assigned-clock-parents = parent of main clock.
>> can be <&ext_gmac> or <&cru SCLK_MAC_PLL>.
>> + - phy-type: For internal phy, it must be "internal"; For external phy, no need
>> + to configure this.
>
> Use the standard "phy-mode" property. You will see
> drivers/net/ethernet/broadcom/genet/ actually define a phy-mode =
> "internal" property specifically for that. This should probably be
> generalized so it is useful to other drivers a well, I will do just that.
>
I'm a little confused for the property of phy-mode = "internal".
If the property of phy-mode is configured as "internal" from DT , i
could not get the rmii or rgmii mode for the phy.
I use it to differentiate rmii or rgmii for different configuration.
>>
>> Optional properties:
>> - tx_delay: Delay value for TXD timing. Range value is 0~0x7F, 0x30 as default.
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
>> index a8e8fd5..c1a1413 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
>> @@ -41,6 +41,7 @@ struct rk_gmac_ops {
>> void (*set_to_rmii)(struct rk_priv_data *bsp_priv);
>> void (*set_rgmii_speed)(struct rk_priv_data *bsp_priv, int speed);
>> void (*set_rmii_speed)(struct rk_priv_data *bsp_priv, int speed);
>> + void (*internal_phy_powerup)(struct rk_priv_data *bsp_priv);
>> };
>>
>> struct rk_priv_data {
>> @@ -52,6 +53,7 @@ struct rk_priv_data {
>>
>> bool clk_enabled;
>> bool clock_input;
>> + bool internal_phy;
>>
>> struct clk *clk_mac;
>> struct clk *gmac_clkin;
>> @@ -61,6 +63,9 @@ struct rk_priv_data {
>> struct clk *clk_mac_refout;
>> struct clk *aclk_mac;
>> struct clk *pclk_mac;
>> + struct clk *clk_macphy;
>> +
>> + struct reset_control *macphy_reset;
>>
>> int tx_delay;
>> int rx_delay;
>> @@ -750,6 +755,48 @@ static void rk3399_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
>> .set_rmii_speed = rk3399_set_rmii_speed,
>> };
>>
>> +#define RK_GRF_MACPHY_CON0 0xb00
>> +#define RK_GRF_MACPHY_CON1 0xb04
>> +#define RK_GRF_MACPHY_CON2 0xb08
>> +#define RK_GRF_MACPHY_CON3 0xb0c
>> +
>> +#define RK_MACPHY_ENABLE GRF_BIT(0)
>> +#define RK_MACPHY_DISABLE GRF_CLR_BIT(0)
>> +#define RK_MACPHY_CFG_CLK_50M GRF_BIT(14)
>> +#define RK_GMAC2PHY_RMII_MODE (GRF_BIT(6) | GRF_CLR_BIT(7))
>> +#define RK_GRF_CON2_MACPHY_ID HIWORD_UPDATE(0x1234, 0xffff, 0)
>> +#define RK_GRF_CON3_MACPHY_ID HIWORD_UPDATE(0x35, 0x3f, 0)
>> +
>> +static void rk_gmac_internal_phy_powerup(struct rk_priv_data *priv)
>> +{
>> + if (priv->ops->internal_phy_powerup)
>> + priv->ops->internal_phy_powerup(priv);
>> +
>> + regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_MACPHY_CFG_CLK_50M);
>> + regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_GMAC2PHY_RMII_MODE);
>> +
>> + regmap_write(priv->grf, RK_GRF_MACPHY_CON2, RK_GRF_CON2_MACPHY_ID);
>> + regmap_write(priv->grf, RK_GRF_MACPHY_CON3, RK_GRF_CON3_MACPHY_ID);
>> +
>> + /* disable macphy, the default value is enabled */
>> + regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_MACPHY_DISABLE);
>> + if (priv->macphy_reset)
>> + reset_control_assert(priv->macphy_reset);
>> + usleep_range(10, 20);
>> + if (priv->macphy_reset)
>> + reset_control_deassert(priv->macphy_reset);
>> + usleep_range(10, 20);
>> + regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_MACPHY_ENABLE);
>> + msleep(30);
>> +}
>> +
>> +static void rk_gmac_internal_phy_powerdown(struct rk_priv_data *priv)
>> +{
>> + regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_MACPHY_DISABLE);
>> + if (priv->macphy_reset)
>> + reset_control_assert(priv->macphy_reset);
>> +}
>> +
>> static int gmac_clk_init(struct rk_priv_data *bsp_priv)
>> {
>> struct device *dev = &bsp_priv->pdev->dev;
>> @@ -803,6 +850,14 @@ static int gmac_clk_init(struct rk_priv_data *bsp_priv)
>> clk_set_rate(bsp_priv->clk_mac, 50000000);
>> }
>>
>> + if (bsp_priv->internal_phy) {
>> + bsp_priv->clk_macphy = devm_clk_get(dev, "clk_macphy");
>> + if (IS_ERR(bsp_priv->clk_macphy))
>> + dev_err(dev, "cannot get %s clock\n", "clk_macphy");
>> + else
>> + clk_set_rate(bsp_priv->clk_macphy, 50000000);
>> + }
>> +
>> return 0;
>> }
>>
>> @@ -826,6 +881,9 @@ static int gmac_clk_enable(struct rk_priv_data *bsp_priv, bool enable)
>> bsp_priv->clk_mac_refout);
>> }
>>
>> + if (!IS_ERR(bsp_priv->clk_macphy))
>> + clk_prepare_enable(bsp_priv->clk_macphy);
>> +
>> if (!IS_ERR(bsp_priv->aclk_mac))
>> clk_prepare_enable(bsp_priv->aclk_mac);
>>
>> @@ -858,6 +916,9 @@ static int gmac_clk_enable(struct rk_priv_data *bsp_priv, bool enable)
>> bsp_priv->clk_mac_refout);
>> }
>>
>> + if (!IS_ERR(bsp_priv->clk_macphy))
>> + clk_disable_unprepare(bsp_priv->clk_macphy);
>> +
>> if (!IS_ERR(bsp_priv->aclk_mac))
>> clk_disable_unprepare(bsp_priv->aclk_mac);
>>
>> @@ -940,6 +1001,21 @@ static struct rk_priv_data *rk_gmac_setup(struct platform_device *pdev,
>> bsp_priv->clock_input = false;
>> }
>>
>> + ret = of_property_read_string(dev->of_node, "phy-type", &strings);
>> + if (!ret && !strcmp(strings, "internal")) {
>> + bsp_priv->internal_phy = true;
>> + bsp_priv->macphy_reset = devm_reset_control_get(dev,
>> + "mac-phy");
>> + if (IS_ERR(bsp_priv->macphy_reset)) {
>> + dev_info(dev, "no macphy_reset control found\n");
>> + bsp_priv->macphy_reset = NULL;
>> + }
>> + } else {
>> + bsp_priv->internal_phy = false;
>> + }
>> + dev_info(dev, "internal PHY? (%s).\n",
>> + bsp_priv->internal_phy ? "yes" : "no");
>> +
>> ret = of_property_read_u32(dev->of_node, "tx_delay", &value);
>> if (ret) {
>> bsp_priv->tx_delay = 0x30;
>> @@ -1014,6 +1090,9 @@ static int rk_gmac_powerup(struct rk_priv_data *bsp_priv)
>> pm_runtime_enable(dev);
>> pm_runtime_get_sync(dev);
>>
>> + if (bsp_priv->internal_phy)
>> + rk_gmac_internal_phy_powerup(bsp_priv);
>> +
>> return 0;
>> }
>>
>> @@ -1021,6 +1100,9 @@ static void rk_gmac_powerdown(struct rk_priv_data *gmac)
>> {
>> struct device *dev = &gmac->pdev->dev;
>>
>> + if (gmac->internal_phy)
>> + rk_gmac_internal_phy_powerdown(gmac);
>> +
>> pm_runtime_put_sync(dev);
>> pm_runtime_disable(dev);
>>
>>
>
>
Powered by blists - more mailing lists